文献openalex2026-08-18许可待确认
High-performance composites development has been focused on enhancing the fiber strength, specific modulus, matrix rigidity, and lightweight frameworks. Aramid Fibers (such as Kevlar, Twaron, and Nomex), being high-performance fibers, have garnered lot of attention as a reinforcing material in poly…
doi: 10.70225/197509droxtdsource:openalex: https://openalex.org/W7203678719
文献openalex2026-08-18cc-by
Cost is one of the decisive factors when selecting a fibre type for structural strengthening. This study therefore tested the hypothesis that a low-cost fibre can still provide a substantial improvement in the mechanical performance of strengthened timber beams. Four-point bending tests were carrie…
doi: 10.3390/ma19163484source:openalex: https://openalex.org/W7203678889
文献openalex2026-08-18许可待确认
Abstract Despite the significant interest in rigid, sp3-rich 3D hydrocarbon frameworks in medicinal and materials chemistry, the [13]graphanyl scaffold has remained synthetically prohibitive and, consequently, underexplored. Herein, we report a scalable, de novo stereoselective synthesis of the ttt…
doi: 10.1021/jacs.6c12162source:openalex: https://openalex.org/W7203678523
文献openalex2026-08-18许可待确认
Smart wearables are becoming a day-to-day life companion for many of us as modern technologies are advancing with every day that passes by. Fitness evaluations, health monitoring, disease diagnosis, and the treatment of many illnesses and disorders are all made possible by wearable technology. Thes…
doi: 10.1201/9781003507208-1source:openalex: https://openalex.org/W7203677032
文献openalex2026-08-18cc-by
Lithium–sulfur batteries have become one of the research focuses of scientists over the past decade due to their high theoretical specific capacity (approximately 1670 mAh/g), low cost, and environmental friendliness, and the abundant reserves of their raw materials. Nevertheless, they still suffer…
doi: 10.3390/nanoenergyadv6030025source:openalex: https://openalex.org/W7203677409
文献openalex2026-08-18许可待确认
This paper presents the experimental and computational results of the comparative study of microstructure, mechanical properties and corrosion behavior of tungsten inert gas (TIG)-welded 304, 309/310, and 316 steels. The study involves the coupled influence of microstructural changes, sensitization…
doi: 10.1080/25787616.2026.2706209source:openalex: https://openalex.org/W7203677502
文献openalex2026-08-18cc-by
Reinforced concrete in marine tidal and atmospheric zones can be simultaneously exposed to chloride, sulfate and carbonation. However, most durability assessments consider these mechanisms individually or as binary couplings. This limitation is particularly important for low-carbon binders, whose m…
doi: 10.1016/j.cscm.2026.e06429source:openalex: https://openalex.org/W7203677889
文献openalex2026-08-18cc-by
Industria europeană de apărare traversează o perioadă de accelerare tehnologică, în care platformele aeriene autonome, sistemele energetice solid-state și infrastructura de testare avansată devin elemente critice pentru competitivitate, reziliență și integrare în programe precum SAFE, EDA, NATO DIA…
doi: 10.5281/zenodo.21988639source:openalex: https://openalex.org/W7203677699
文献openalex2026-08-18cc-by
The urgent demand for efficient carbon capture technologies has sparked the search for simple, scalable materials with tailored sorption properties. In this study, we demonstrate that unmodified cellulose acetate (CA) nanofiber membranes can serve as effective CO2 sorbents at room temperature, offe…
doi: 10.1007/s10570-026-07182-1source:openalex: https://openalex.org/W7203676565
文献openalex2026-08-18许可待确认
Abstract Aramid nanofibers (ANFs) have emerged as promising polymeric building blocks for high-performance composites and porous solids due to their exceptional mechanical, electrical, and thermal properties. In contrast, their optical, and specifically, luminescent properties have remained unexplo…
doi: 10.1021/acs.chemmater.6c01205source:openalex: https://openalex.org/W7203676941
文献openalex2026-08-18cc-by
Abstract The exponential global growth of post-consumer plastic waste poses severe environmental and socio-ecological challenges, necessitating innovative, decentralized recycling strategies. Simultaneously, the rapid industrial and domestic proliferation of Fused Deposition Modeling (FDM) 3D print…
doi: 10.5281/zenodo.21996876source:openalex: https://openalex.org/W7203676619
文献openalex2026-08-18cc-by
Objective Glioma is the most common and aggressive primary intracranial tumor. Its clinical management is substantially hindered by the blood–brain barrier (BBB) and the immunosuppressive tumor microenvironment (TME). This study aimed to construct PD-1-functionalized mesenchymal stem cell (MSC) mem…
doi: 10.3389/fimmu.2026.1906527source:openalex: https://openalex.org/W7203677028
文献openalex2026-08-18cc-by-nc-nd
Thin, flexible packaging of integrated circuits (ICs) is essential for next-generation implantable devices, where extreme miniaturisation must be achieved without compromising reliability. This work presents a fabrication process for ultrathin chip packages based on liquid crystal polymer (LCP), se…
doi: 10.1016/j.mejo.2026.107425source:openalex: https://openalex.org/W7203676152
文献openalex2026-08-18cc-by-nc-nd
Widthwise residual-stress non-uniformity generated during post-rolling cooling remains difficult to screen because adjacent regions follow different thermal, transformation and dimensional histories while remaining mechanically continuous. Under a fixed upstream rolling schedule, this work evaluate…
doi: 10.1016/j.matdes.2026.116825source:openalex: https://openalex.org/W7203675407
文献openalex2026-08-18cc-by
This paper presents the experimental and computational results of the comparative study of microstructure, mechanical properties and corrosion behavior of tungsten inert gas (TIG)-welded 304, 309/310, and 316 steels. The study involves the coupled influence of microstructural changes, sensitization…
doi: 10.6084/m9.figshare.33283921.v1source:openalex: https://openalex.org/W7203675748
文献openalex2026-08-18cc-by
This paper develops a revised mathematical solution framework for the chemistry challenge "Can enzymes or engineered microbes depolymerize major commodity plastics rapidly outside tightly controlled laboratory conditions?". The proposed Polymer-Class Biocatalytic Accessibility Model (PCBAM) was con…
doi: 10.5281/zenodo.21996532source:openalex: https://openalex.org/W7203675284
文献openalex2026-08-18cc-by-nc
Bu çalışma, hazır giyim ve konfeksiyon alanında farklı beden gruplarına ait kalıp/giyim parçası görsellerindeki yapısal kusurların sınıflandırılması için Hu momentleri ile evrişimsel sinir ağı (CNN) mimarisini birleştiren hibrit bir model önermektedir. Small (S), Medium (M) ve Large (L) beden grupl…
doi: 10.31466/kfbd.1727104source:openalex: https://openalex.org/W7203675408
文献openalex2026-08-18许可待确认
Abstract Lignocellulose is the most abundant and sufficiently available resource for the development of the bio-economy. Although the reductive catalytic fractionation (RCF) represents a promising pretreatment strategy to valorize lignin into phenolic monomers, significant challenges are to be addr…
doi: 10.1021/acscatal.6c03716source:openalex: https://openalex.org/W7203675439
文献openalex2026-08-18cc-by
ConferenCe reportinvestigated.Towards building operable quantum systems, e.g. in the form of hierarchically integrated devices, many cycles of trial and error are needed.Conferences here play a key role to foster cross-disciplinary and cross-border discussions to promote creativity, discuss and imp…
doi: 10.2533/chimia.2026.554source:openalex: https://openalex.org/W7203675660
文献openalex2026-08-18cc-by
Universal Condensation Principle
doi: 10.5281/zenodo.21995024source:openalex: https://openalex.org/W7203675718