Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Ternary biodegradable polymer blends of poly(lactic acid) (PLA), poly(butylene succinate) (PBS), and poly(ε-caprolactone) (PCL) with the composition 45/10/45 wt% and exhibiting partial-wetting morphology were prepared. In this morphology, the minor phase is present as self-assembled droplets at the co-continuous inter…
Abstract The synthetic tunability of semiconductor nanowires has enabled researchers to apply these materials in a variety of applications from energy harvesting to biological stimulation. One of the most intensely researched areas is the synthesis of branched nanowires, or nano-tree structures, owing to their high su…
The dependence of the Purcell factor on nanowire metamaterial geometry was analyzed. Calculations made about the Purcell factor in realistic composites, operating at an optical spectral range, are provided. We applied a metamaterial, aiming to mitigate the negative effects of absorption in metals on the Purcell effect…
Liquid film or drop wicking on solid surface without any external energy input is highly desirable in specific industrial processes. This paper proposes a numerical study of the dynamics of liquid wicking on geometrically structured flat surface. We consider structures deduced from flat surface by super-imposing a ser…
Fuel Cell (FC) energy-based systems are an emerging source of distributed generation (DG) connected to the power distribution system. This paper focuses on implementing the grid-connected Solid Oxide Fuel Cells (SOFC) system on the Real-Time Digital Simulation (RTDS) platform for constant fuel utilization topology. Th…
In radiotherapy, point doses via surface dose measurement are confirmed using a dosimeter attached to the patient's skin. This results in an error margin of about 11.8% or higher because the attachment site is visually confirmed. Thus, a digital flexible array dosimeter that can analyse body surface area is needed. He…
Highly donor-doped ceramics with composition of Ba0.984Y0.016TiO3 were prepared for thermistors with positive temperature coefficient of resistivity (PTCR) via a route of solid reaction, reducing sintering and aerial oxidation. The effects of Mn additive were investigated on the ceramic characteristics of composition,…
The aim of the article is to compare the experimental investigation of deflection of the sandwich composite beam with theoretical models. The experimental test specimens were composed of three layers. Skins were made using epoxy-resin-impregnated glass laminates with plain weave. The light weight foam Divinycell H100…
Two benzothiadiazole (BT) small molecule donors (namely D1 and D2) were designed and synthesized. We studied their photovoltaics properties and filed effect properties. It is found that the best power conversion efficiency (PCE) of the organic solar cells (OSCs) was 6.87% based on the D2: IDIC-4F (the donor/acceptor(D…
Two types of edible fruit coating and an active packaging were tested for their effect during 15 days of storage at atmosphere condition (24-25oC) with 60-70 % RH. One coating was alginate-based, while the other hand had palm oil-based as the main ingredient. These two coatings exhibit weight loss reduction and appear…
The main stages of the primary materials are that feed the furnaces to form the mineral compounds of cement, which are the stage of drying the materials from water at a temperature of 100 degree Celsius and moving to the crystallization area at a temperature of 550 degree Celsius. Thus, the free lime begins to break d…
Abstract Numerous folding patterns, structures, and behaviors exist in nature that may provide design solutions to engineering problems. While applying biological solutions to engineering design is evidently valuable, the retrieval of useful design inspiration remains a primary challenge preventing the transfer of kno…
The optimization of 2,4,6 tri-iodobenzene, diatrizoate and, ioxaglate contrast agent was done in order to calculate the energetic behavior and dipole moment of the title compounds in the gas phase and in solution phases.The total energy for different orbital transitions, the energy gap between HOMO and LUMO, electro-n…
Abstract Reluctance forces are the main cause of vibration in electrical machines. The influence of magnetostriction is still the matter of controversy. In the article, program Ansys (typical for finite element method) was used to analyze stator deformation due to magnetic forces (Maxwell and magnetostriction) for the…
Many forces are driving regulatory policies toward the complete decarbonization of the US energy system. Industrial heat, aviation, heavy‐duty freight transport, and high‐renewable system load balancing will all be challenging to decarbonize, or in the case of load balancing, to implement over long time and distance s…
Abstract Regioselective addition of nonsymmetrical monomers in radical polymerization is a basic issue for control of the reaction kinetics and structure of the resulting products. In reversible addition‐fragmentation chain transfer (RAFT) polymerization, head addition generates primary alkyl adducts when trapped by R…
Metal Matrix Composite (MMC) reinforced in friction stir processing (FSP) has increased insights that can affectively attain the desired mechanical properties for the manufactured samples. The favorable conditions of carbides are considered for reinforcing the SiC particles into the Aluminum 6061. The methodology of f…
This article is focused on buckling characteristics of fully profiled sandwich structure based on polyethylene terephthalate (PET) substrate and thicker Multi wall carbon nanotubes (MWCNT) which are bonded together using separate adhesives, Therefore this research article represents a new design and 3-D finite element…
In this chapter, the authors discuss the reactor design and development for Direct Nonoxidative Methane Conversion (DNMC) in methane upgrading, focusing on the multifunctional reactors that concurrently tackle two or more barriers present in the DNMC process. Soon after demonstrating the ability of Palladium-based mem…
Abstract This work builds on the iodine-induced stress corrosion cracking (ISCC) model of Lewis and Kleczek by integrating the fuel performance model fuel and sheath modeling tool (FAST) to provide thermal and mechanical analysis of the fuel sheath, which was previously required as input parameters. The iodine transpo…