Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The objective of this paper is to develop a twodimensional numerical model to simulate the response of Scots pine (Pinus sylvestris L.) defect free timber members in order to predict the behaviour of these members when subjected to external forces. For this purpose, data of the mechanical properties of Scots pine were…
Titanium alloys are widely used in the manufacture of biomedical implants because they possess an excellent combination of physical properties and outstanding biocompatibility. Today, the most widely used alloy is Ti-6Al-4V, but some studies have reported adverse effects with the long-term presence of Al and V in the…
The effect of different propionaldehyde ratios on the properties of bis-GMA-based comonomers and copolymers diluted with propoxylated bis-GMA (CH3bis-GMA) was evaluated. Five experimental comonomers were prepared combining bis-GMA with CH3bis-GMA and propionaldehyde at 0, 2, 8, 16, 24 mol%. Light polymerization was ef…
Red mud (RM) is a mineral waste, residue of the Bayer process used to obtain alumina from bauxite. While the exploration of rolled pebble damages the environment and is much more controlled by the government, the huge RM disposal areas do not stop increasing and polluting soil, rivers and groundwater sources in Amazon…
Electron magnetic resonance (EMR) spectra of Cr3+ ions in samples of chromium-doped strontium titanate (SrTiO3) have been studied at room temperature for chromium concentrations between 0.20 and 1.00 mol%. According to previous studies, chromium substitutes Ti4+ sites in the lattice and its preferred valence state is…
Lightfast color filters (intensively and brightly colored) can be easily produced by dying optical plastics with the surface plasmon resonance (SPR) of metal nanoparticles such as silver and gold. Here, color filters based on silver nanoparticles embedded in amorphous polystyrene have been prepared by dissolving and t…
In this article, Carrera’s Unified Formulation (CUF) is combined with a radial basis function collocation technique. A higher-order theory that considers deformations in the thickness direction was developed under CUF to predict the buckling behaviour of laminated plates. The obtained governing equations and boundary…
In the present study, the tensile strength of ferritic and austenitic functionally graded steels produced by electroslag remelting has been modeled. To produce functionally graded steels, two slices of plain carbon steel and austenitic stainless steels were spot welded and used as electroslag remelting electrode. Func…
This study evaluates the structural, microstructural, electric and magnetic properties of nickel ferrite samples prepared through the solid state reaction. It was observed that an increase in the sintering temperature produces a higher cation concentration in the A site when compared to the B site. The assessment of m…
In this study Eucalyptus grandis (CEG) and Pinus taeda (CPT) cellulose fibers obtained from kraft and sulfite pulping process, respectively, were characterized using Fourier transform infrared (FTIR) spectroscopy and thermogravimetry (TGA). The degradation kinetic parameters were determined by TGA using Coats and Redf…
Open pore metallic foams can be used for high temperature, high performance heat exchanger due to their high gas permeability and heat conductivity provided that skins properly attach to the foam’s struts on the surface. In the current study, a novel process was successfully developed to fill pores on the surface of t…
Aluminum is a light metal and is widely used in a variety of industries. Aluminum-silicon has good casting properties but does not offer any suitable tribological properties. Therefore, in this study surface composite coating was performed by the gas tungsten arc welding (GTAW) process, which increased hardness up to…
The introduction of magnetic properties in adsorbent materials has the aim of improving solid-liquid separation processes. In this work, a magnetic composite was synthesized through the precipitation of manganese oxide in the presence of magnetite particles using O2 as an oxidant. The composite proved to be chemically…
Poly(ethylene tereftalate) (PET) is a polymer highly susceptible to the hydrolytic reactions that occur during applications and mainly in thermomechanical processing. These reactions lead to the decrease of molecular weight of the polymer, limiting the recycling number of the material. The reactive extrusion of the PE…
A composite beam with single delamination under the action of moving load has been modeled accounting for the Poisson’s effect, shear deformation, and rotary inertia. The existence of the delamination changes the stiffness of the structure, and this affects the dynamic response of the structure. We have used a constra…
In this study, the rheological properties of different samples of olive oils purchased from the same producer were investigated in a wide range of temperature. In addition, at constant temperatures, the shear rate was varied to obtain heating effects. It was found that all samples reach a minimum viscosity in the temp…
The constituent materials used to build the wooden vault over the Plenary Hall in the Spain’s Senate Building (ca 1814-1820) are analyzed in this paper. Characteristics of gypsum mortar applied on pine beams, boards and blockboard, have been determined. The esparto (=needlegrass) fibre provides a framework for the gyp…
The methodology of evaluation of rheological parameters of non-Newtonian fluids on the basis of rotational viscosimetry data has been described, which is based upon rigorous solution of Couette flow equation and considers informational content of experiments. Class of models is formed for rheologically stationary syst…
The fracture surfaces of PM Cr-Mo steels intensively depends on pores structure, densification, diffusion of alloying elements, contact area between particles (sinter necks), microstructural homogeneity, and type of applied load. Also, knowing about element distribution in PM parts to evaluate what places are good for…