P. R. Swann1969-04-01CORROSION
A flat corrosion interface is unstable on alloys undergoing preferential dissolution of one component. This instability results from the uneven accumulation of the less soluble component which enables pits to develop and grow into corrosion tunnels. Electron microscope observations of Cu3Au exposed to a ferric chlorid…
Corrosion Behavior and InhibitionElectron and X-Ray Spectroscopy TechniquesAnodic Oxide Films and Nanostructures
W. L. Scaff、Denzel L. Dyer、Kentarou Mori1969-04-01Journal of Bacteriology
The europium chelate of 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (thenoyl-trifluoroacetone; TTA) is firmly bound to microorganisms. It fluoresces brightly at 613 nm with activation at 340 nm. Cells may be stained with 10(-3)m chelate in 50% ethyl alcohol, followed by washing with 50% ethyl alcohol. Equal or bette…
Medical Imaging Techniques and ApplicationsRadioactive element chemistry and processingLanthanide and Transition Metal Complexes
Richard Schrader、Rolf Wissing、Hans Kubsch1969-04-01Zeitschrift für anorganische und allgemeine Chemie
Abstract Bei der Schwingmahlung von Quarz tritt Amorphisierung ein und Radikale entstehen. Mahlung im Sauerstoffstrom führt zur Bildung von ‐Gruppen, die durch ESR‐Messung, ihre Oxydations‐ und Reduktionswirkung und ihren thermisch dissoziierbaren Sauerstoff bestimmt werden. — Mahlung in Wasserdampf—Argon‐Atmosphäre e…
Glass properties and applicationsIron oxide chemistry and applicationsAerogels and thermal insulation
James Steve Browder、Stanley S. Ballard1969-04-01Applied Optics
A three-terminal capacitance type dilatometer has been developed for investigating the thermal expansion of optical materials at low temperatures. The method is applicable when only small sample lengths (13 mm or less) are available. The thermal expansion coefficients of six polycrystalline materials (the Irtrans) and…
Glass properties and applicationsPhotorefractive and Nonlinear OpticsPhase-change materials and chalcogenides
W. R. Vieth、Walter F. Wuerth1969-04-01Journal of Applied Polymer Science
Abstract Time‐lag and static sorption experiments were employed to measure permeability, diffusivity and solubility constants of He, A, and CF 4 in polypropylene films cooled at various rates from the melt and subsequently annealed at varying temperatures near the melting point. While solubility constants in films ann…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesPolymer Science and PVC
R. Aenishänslin、Conrado Guth、Philip Hofmann 等 5 位作者1969-04-01Textile Research Journal
Recent studies of fire accidents in Switzerland involving individuals' wearing apparel have illustrated the importance of a durable flame-retardant finish for cotton textiles. Knowledge of the dynamics and chemistry of pyrolysis and combustion is considered essential to understand the mechanism of flame-retardant syst…
Flame retardant materials and properties
M. R. Brown、K G Roots、W. A. Shand1969-04-01Journal of Physics C Solid State Physics
A preliminary analysis of the absorption and fluorescence spectra of Er 3+ (4f 11 ) in LiYF 4 has been made. With the aid of previous work on Er 3+ in LaF 3 , various states have been identified. The Racah parameters giving the best overall agreement between the predicted `free ion' spectrum and the spectrum of Er 3+…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsInorganic Fluorides and Related Compounds
Richard M. Wing、Kenneth P. Callahan1969-04-01Inorganic Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTCharacterization of metal-oxygen bridge systemsRichard M. Wing and K. P. CallahanCite this: Inorg. Chem. 1969, 8, 4, 871–874Publication Date (Print):April 1, 1969Publication History Published online1 May 2002Published inissue 1 April 1969https://pubs.acs.org/doi/10.1021/ic50…
Electrocatalysts for Energy ConversionSemiconductor materials and devicesElectronic and Structural Properties of Oxides
L. M. Brown、Anthony Kelly、Rayner M. Mayer1969-04-01Philosophical magazine
A model for describing the clustering of interstitial atoms in graphite is set forth, based on chemical reaction rate theory. Vacancies and interstitials are assumed to be homogeneously generated by the neutron flux. The interstitials are allowed to move freely between the layer planes whilst the vacancies are conside…
Fusion materials and technologiesNuclear reactor physics and engineeringGraphite, nuclear technology, radiation studies
H. Witte1969-04-01Industrial & Engineering Chemistry Process Design and Development
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTFluidized-Bed Combustion of Graphite-Base Nuclear Reactor FuelsH. O. WitteCite this: Ind. Eng. Chem. Process Des. Dev. 1969, 8, 2, 145–149Publication Date (Print):April 1, 1969Publication History Published online1 May 2002Published inissue 1 April 1969https://pubs.acs.org/do…
Nuclear Materials and PropertiesHeat transfer and supercritical fluidsSubcritical and Supercritical Water Processes
Stanley M. Kulpa1969-04-01Journal of Applied Physics
A precise determination of the temperature dependence of the zero external field F19 NMR frequency in the antiferromagnet FeF2 has been made over the temperature range from 4.2°K to 0.99966TN. Ferrous fluoride, unlike the previously studied antiferromagnet MnF2, has a large single ion magnetic anisotropy. The present…
Magnetism in coordination complexesAdvanced NMR Techniques and ApplicationsInorganic Fluorides and Related Compounds
Martin E. Straumanis、Don C. Kim1969-04-01International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)
Article Lattice Constants, Thermal Expansion Coefficients, Densities and Perfection of Structure of Pure Iron and of Iron Loaded with Hydrogen was published on April 1, 1969 in the journal International Journal of Materials Research (volume 60, issue 4).
Powder Metallurgy Techniques and MaterialsMaterial Properties and Failure MechanismsMetallurgical and Alloy Processes
Thor L. Smith、James A. Rinde1969-04-01Journal of Polymer Science Part A-2 Polymer Physics
Abstract The strength and extensibility of an unfilled styrene‐butadiene rubber vulcanizate were determined in constrained biaxial tension (essentially pure shear) by stretching thinwalled cylindrical specimens in the axial direction with an Instron tester while gas pressure was admitted to maintain constant the outsi…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesElasticity and Material Modeling
R. Vogel、P. J. Walsh1969-04-01Applied Physics Letters
Certain amorphous materials exhibit rapid electrical switching. The variation in their capacitance was evaluated as a function of temperature and electric field in the high-resistance state. The zero-field capacitance follows a Curie-Weiss law above room temperature. At low temperatures, and at fields near the thresho…
Liquid Crystal Research AdvancementsPhase-change materials and chalcogenidesSolid-state spectroscopy and crystallography
T. R. Specht1969-04-01IEEE Transactions on Power Apparatus and Systems
Formulas are developed and curves given for the magnetizing inrush current for a single-phase transformer. Series system inductance and resistance are included. The transformer is assumed to have no exciting current below saturation and constant saturated inductance above saturation. The formulas apply to circuits wit…
Power Quality and HarmonicsMagnetic Properties and ApplicationsElectric Power Systems and Control
Ray A. Dickie、Thor L. Smith1969-04-01Journal of Polymer Science Part A-2 Polymer Physics
Abstract The ultimate properties of an unfilled styrene‐butadiene rubber vulcanizate in equal biaxial tension were determined by inflating a circular membrane into a bubble. Tests were made at several extension rates (evaluated at the pole) from about 0.15 to 4 min −1 and at temperatures from −43 to 90°C. The stress i…
Polymer Nanocomposites and PropertiesElasticity and Material ModelingStructural Analysis of Composite Materials
Howard B. Johnson、Frank Keßler1969-04-01Journal of the American Ceramic Society
The rates of dehydroxylation of three kaolinites which varied in particle thickness were studied from 417° to 480°C under very low water vapor partial pressures. The dehydroxylation rate was directly proportional to the surface area and had an activation enthalpy of 41.0 kcal/mol. The data did not fit either a diffusi…
Soil and Unsaturated FlowClay minerals and soil interactionsIron oxide chemistry and applications
Yoshimoto Abe、Ichiro Kijima1969-04-01Bulletin of the Chemical Society of Japan
Abstract Tributoxysiloxychlorosilanes [(BuO)3SiO]xSiCl4−x(Bu=t: x=1,2; Bu=s: x=1,2,3 or 4) were prepared by the reaction of silicon tetrachloride with tributoxysilanol in the presence of pyridine. The hydrolysis of these compounds led to the formation of tributoxysiloxysilanols [(BuO)3SiO]xSi(OH)4−x (Bu=t: x=2; Bu=s:…
Silicone and Siloxane Chemistry
S. M. Spitzer、Stephen E. Schwartz1969-04-01IEEE Transactions on Electron Devices
The phenomena of electromigration is self-diffusion effect, and has an associated activation energy. Although the activation energy for bulk self-diffusion in aluminum is 1.48 eV, experimentally measured energies for films range approximately from 0.5 to 1.2 eV. This lower observed energy may be or has been ascribed b…
Semiconductor materials and devicesCopper Interconnects and ReliabilitySemiconductor materials and interfaces
Kwei‐Ping Shen Kwei1969-04-01Journal of Polymer Science Part A-1 Polymer Chemistry
Abstract The photo‐oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen ( 1 Δ g ) molecules to the initiation mechanism is discussed. Th…
Advanced Polymer Synthesis and CharacterizationPolymer Science and PVC