Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 118817 / 120211 页 · 当前展示 2,376,321–2,376,340 / 2,404,217 条匹配结果 · 摘要仅作预览

Effect of O2 pressure during deposition on properties of rf-sputtered Sn-doped In2O3 films

John C. C. Fan、Frank J. Bachner、G. Foley1977-12-01Applied Physics Letters

The electrical and optical properties of rf-sputtered Sn-doped In2O3 (ITO) films have been found to depend strongly on the O2 partial pressure during deposition. For the sputtering conditions used, films with both low electrical resistivity (ρ ∼ 3 × 10−4 Ω cm) and high visible transmission (∼ 90%) were obtained only o…

Transition Metal Oxide NanomaterialsGas Sensing Nanomaterials and SensorsZnO doping and properties

Biodegradable Films from Starch and Ethylene-Acrylic Acid Copolymer

F. H. Otey、Richard P. Westhoff、C. R. Russell1977-12-01Product R&D

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTBiodegradable Films from Starch and Ethylene-Acrylic Acid CopolymerFelix H. Otey, Richard P. Westhoff, and Charles R. RussellCite this: Ind. Eng. Chem. Prod. Res. Dev. 1977, 16, 4, 305–308Publication Date (Print):December 1, 1977Publication History Published online1 May 2002…

biodegradable polymer synthesis and properties

Channel constituents in cordierite

Don S. Goldman、George R. Rossman、W. A. Dollase1977-12-01CaltechAUTHORS (California Institute of Technology)

Chemical, optical and infrared absorption, Mössbauer and X-ray data are reported for eight cordierite samples. Fe^(2+) in the octahedral and channel sites is identified in optical and Mössbauer spectra, which indicate that generally less than 5 percent of the total iron is Fe^(2+) in the channels. The single-crystal M…

Surface and Thin Film PhenomenaX-ray Diffraction in CrystallographyIron oxide chemistry and applications

Secondary Loss Peaks in Glassy Amorphous Polymers

J. Heijboer1977-12-01International Journal of Polymeric Materials

A short description is given of the determination–as a function of frequency and temperature–of secondary mechanical loss peaks in glassy amorphous polymers. The molecular motions causing secondary loss peaks are classified. The dependence on frequency of the temperature of the maximum of the loss peak is discussed. T…

Glass properties and applicationsPolymer crystallization and propertiesMaterial Dynamics and Properties

The Ecology of the Wash. III. Density-Related Behaviour and the Possible Effects of a Loss of Feeding Grounds on Wading Birds (Charadrii)

J. D. Goss‐Custard1977-12-01Journal of Applied Ecology

J. D. Goss-Custard, The Ecology of the Wash. III. Density-Related Behaviour and the Possible Effects of a Loss of Feeding Grounds on Wading Birds (Charadrii), Journal of Applied Ecology, Vol. 14, No. 3 (Dec., 1977), pp. 721-739

Animal Ecology and Behavior StudiesAvian ecology and behaviorMetallurgy and Material Science

Domain-like Incommensurate Charge-Density-Wave States and the First-Order Incommensurate-Commensurate Transitions in Layered Tantalum Dichalcogenides. I. 1T-Polytype

Kazuo Nakanishi、Hiroyuki Shiba1977-12-01Journal of the Physical Society of Japan

The incommensurate (I) states of the triple charge density waves (CDW) in 1T-TaS 2 are studied in details by taking into account a sufficiently large number of harmonics. A domain-like structure of the I-CDW state is shown to be realized as the fundamental wave vector of the I state approaches to the commensurate (“3×…

Organic and Molecular Conductors ResearchInorganic Chemistry and Materials2D Materials and Applications

A numerical model of chemical kinetics of combustion in a turbulent flow reactor

C.K. Westbrook、J.R. Creighton、Carl R.F. Lund 等 4 位作者1977-12-01The Journal of Physical Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTA numerical model of chemical kinetics of combustion in a turbulent flow reactorC. K. Westbrook, J. Creighton, C. Lund, and F. L. DryerCite this: J. Phys. Chem. 1977, 81, 25, 2542–2554Publication Date (Print):December 1, 1977Publication History Published online1 May 2002Publ…

Nonlinear Dynamics and Pattern FormationThermal and Kinetic AnalysisSpectroscopy and Quantum Chemical Studies

Analysis of the linear methods for determining copolymerization reactivity ratios. IV. A comprehensive and critical reexamination of carbocationic copolymerization data

Tibor Kelen、Ferenc Tüdöus、B. Turcsányi 等 4 位作者1977-12-01Journal of Polymer Science Polymer Chemistry Edition

Abstract Increased insight into the mechanism of carbocationic copolymerization has been achieved by classifying and reviewing in detail 334 monomer pairs in terms of the extended Kelen‐Tüdös method. The reactivity ratios ( r values) of essentially all published olefin–olefin, olefin–vinyl ether, vinyl ether‐vinyl eth…

biodegradable polymer synthesis and propertiesOrganometallic Complex Synthesis and CatalysisAdvanced Polymer Synthesis and Characterization

Interaction Between an Oscillating Bubble and a Free Surface

Georges L. Chahine1977-12-01Journal of Fluids Engineering

Abstract Interaction between a collapsing bubble and a free surface is investigated theoretically and experimentally using high speed photography. A limit value for the distance from the free surface to the center of the bubble reported to its radius is found. Under this limit the free surface is not disturbed before…

Fluid Dynamics and Heat TransferUltrasound and Cavitation PhenomenaPickering emulsions and particle stabilization

Density and structure of allophane

Shin–Ichiro Wada、Kōji Wada1977-12-01Clay Minerals

Abstract The densities of two allophane samples measured by displacement with water were 2·72–2·78 g/cm 3 , while those measured by a float-sink test in CH 3 OH-, CH 3 COCH 3 -, C 6 H 6 - and CCl 4 -C 2 H 2 Br 4 mixtures were 1·84, 1·94–1·98, 2·35 and 2·35–2·39 g/cm 3 , respectively. The results of the density determi…

Mineralogy and Gemology StudiesClay minerals and soil interactionsAdsorption, diffusion, and thermodynamic properties of materials

Predicting the Stability of Biological Standards and Products

Thomas B. L. Kirkwood1977-12-01Biometrics

A high level of stability is essential for any biological standard and is desirable in most other biological products. It is in general impossible to observe directly the rate of degradation of a biological standard since no independent scale of measurement is available. An indirect method is therefore required. The m…

Crystallization and Solubility StudiesComputational Drug Discovery MethodsPesticide Residue Analysis and Safety

Preparation and properties of LixVS2 (0 .ltoreq. x .ltoreq. 1)

D. W. Murphy、C. Cros、F. J. Di Salvo 等 4 位作者1977-12-01Inorganic Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTPreparation and properties of LixVS2 (0 .ltoreq. x .ltoreq. 1)D. W. Murphy, C. Cros, F. J. Di Salvo, and J. V. WaszczakCite this: Inorg. Chem. 1977, 16, 12, 3027–3031Publication Date (Print):December 1, 1977Publication History Published online1 May 2002Published inissue 1 De…

Electronic and Structural Properties of OxidesOrganic and Molecular Conductors ResearchAdvanced Condensed Matter Physics

Glass: Structure by Spectroscopy

Philip Gaskell1977-12-01Physics Bulletin

J Wong and C A Angell New York: Marcel Dekker 1976 pp xv + 864 price SwF 145 The need for an extensive review of this subject was clearly demonstrated by the difficulty in keeping this book on my desk and not on my colleagues'. Studies of the generally recognised spectroscopic techniques applied to inorganic glasses a…

Material Dynamics and PropertiesGlass properties and applicationsMineralogy and Gemology Studies

Supramolecular structure of a high‐modulus polyaromatic fiber (Kevlar 49)

M. G. Dobb、D. J. Johnson、B.P. Saville1977-12-01Journal of Polymer Science Polymer Physics Edition

Abstract The supramolecular organization of the aromatic polyamide fiber Kevlar 49 has been studied using a combination of electron diffraction and electron microscope dark‐field image techniques. The dark‐field images derived using selected reflections from longitudinal sections exhibit axial banding of two main type…

Polymer crystallization and propertiesFiber-reinforced polymer compositesSynthesis and properties of polymers

Acción del CO2 sobre un cemento portlcnd. II. Estudio por espectroscopia infrarroja

Demetrio Gaspar-Tebar、Miguel Muñoz-Plaza、Tomás Vázquez-Moreno1977-12-01Materiales de Construccion

En un artículo anterior (1) se dio cuenta de los trabajos realizados sobre la influencia que ejerce el CO2 puro en las características químicas, físicas y fisicomecánicas de un cemento portland (P-450), fabricado por la industria española, habiendo probado que tanto el cemento anhidro, como el hidratado, experimentan…

Ensayo a escala de obra sobre fisuración y agrietamiento

J. I. Martínez Ynzenga、M. Aguanell1977-12-01Materiales de Construccion

Con objeto de demostrar que el hormigón confeccionado con cemento PA-350 no presenta ninguna anomalía (si se pone en obra y se siguen las reglas elementales de cualquier código de buena práctica y que especifican todas las Normas referentes al hormigón, las cuales se dan para cumplir en todos los hormigones, independi…

Métodos electroquímicos semicuantitativos de estudio de lo corrosión por picaduras del acero para armaduras de hormigón

M. C. Andrade Perdrix、J. A. González1977-12-01Materiales de Construccion

El acero embebido en el hormigón se encuentra sometido a un medio de elevada alcalinidad (pH comprendido entre 12 y 13), debido a la cal libre, a los álcalis que contiene el cemento, y al Ca(0H)2 que se forma durante la hidratación de los silicatos. En esta situación, el acero se halla recubierto por una capa de óxido…

Bibliografía

Equipo Editorial1977-12-01Materiales de Construccion