Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 121744 / 123239 页 · 当前展示 2,434,861–2,434,880 / 2,464,778 条匹配结果 · 摘要仅作预览

Copolymerization of carbon disulfide and N‐(β‐cyanoethyl)ethylenimine

Kazuo Soga、Iwakazu Hattori、Masaru Sato 等 4 位作者1979-01-01Journal of Polymer Science Polymer Chemistry Edition

Abstract It was found that carbon disulfide copolymerizes with N ‐(β‐cyanoethyl) ethylenimine by using water as a catalyst. The copolymerization was conducted in detail by using water as a catalyst in the temperature range between 0 and 50°C with various initial concentrations of carbon disulfide and N ‐(β‐cyanoethyl)…

Carbon dioxide utilization in catalysisSynthesis and properties of polymersChemical Reactions and Mechanisms

On the Sessile Diatoms in the Brackish Water Area of the River Yodo. II

Toshikazu Gotoh1979-01-01Japanese Journal of Limnology (Rikusuigaku Zasshi)

In this paper the author deals with the diatom from the Yodo estuary of Osaka, Japan. The samples were taken from the surface of the stone at four stations near the river mouth of the River Yodo on October 12, 1977. In all 49 taxa of diatoms were identified, of which 37 were alive and 12 were observed only in cleaned…

Diatoms and Algae Research

Evaluation of potential ranges for susceptibility to SCC by electrochemical measurements, constant strain rate and constant load stress corrosion cracking experiments

G. Herbsleb、B. Pfeiffer、R. Pöpperling1979-01-01Materials and Corrosion

Abstract For the prediction of possible failures due to SCC as well as for corrosion prevention by anodic or cathodic protection, the evaluation of critical potential ranges for susceptibility to SCC is of great practical importance. For this purpose, accelerated testing techniques have been described in the literatur…

Hydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and DurabilityNon-Destructive Testing Techniques

Thermodynamic Properties and Crystal Structures of Nonstoichiometric Niobium Selenides NbSe<I><SUB>x</SUB></I> for <I>x</I>=1.48&minus;2.00

Kenzō Igaki、Shiro Nishine1979-01-01Transactions of the Japan Institute of Metals

The pressure-composition-temperature relations for niobium selenides NbSex were determined by annealing the sample under controlled selenium vapor pressure in the composition range x=1.48−2.00. There exist five phases; Nb2Se3, 2H(a), 3R, 2H(β) and 4H . The 2H(a) and 3R phase are known stable over a wide range of nonst…

Intermetallics and Advanced Alloy PropertiesIron-based superconductors researchInorganic Chemistry and Materials

Error in X-Ray Diffraction Estimates of Dolomite in Carbonate Rocks--Causes and Cures: ABSTRACT

David N. Lumsden1979-01-01AAPG Bulletin

This DOI is not currently attached to any metadata records. DOIs can’t actually ever be deleted (they’re persistent), but sometimes our members create DOIs in error. We do have a process to approximate deletion which we follow only in rare cases where the DOI has been genuinely created in error, and most crucially, if…

Hydrocarbon exploration and reservoir analysisGeochemistry and Geologic MappingX-ray Diffraction in Crystallography

Über Inhaltsstoffe der Perikarpien von Sapindus mukorossi Gaertn

Hermann Linde1979-01-01Archiv der Pharmazie

Abstract Anläßlich der Gewinnung von Hederagenin (1) sind die Perikarpien von Sapindus mukorossi Gaertn . auf unbekannte Inhaltsstoffe untersucht worden. Es sind Stigmasterin, Stigmasteryl‐β‐D‐glucopyranosid, β‐Amyrin (2) , 28‐Norolean‐12‐en‐3β, 17β‐diol (3) und 3,23‐Ethylidenhederagenin (4) gefunden worden, wobei 4 m…

Natural product bioactivities and synthesisPhytochemical Studies and BioactivitiesPhytochemistry and Bioactive Compounds

Étude de la décomposition thermique du polymère de l'α-acétoxystyrène

Zoubida Sahraoui、Jean-Claude David、J.M. Vergnaud1979-01-01Journal de Chimie Physique

La décomposition thermique globale d'un nouveau polymère, le poly-α-acétoxystyrène est étudié par thermogravimétrie : avec la programmation linéaire de température, avec les isothermes de décomposition. Deux domaines de décomposition distincts sont mis en évidence, d’une part entre 140 et 200 °C, d'autre part au-dessu…

biodegradable polymer synthesis and propertiesSynthesis and properties of polymersThermal and Kinetic Analysis

Fifth Conference on Composite Materials: Testing and Design

作者信息未提供1979-01-01ASTM International eBooks

The Fifth Conference on Composite Materials: Testing and Design was held 20-22 March 1978 at New Orleans, La. The American Society for Testing and Materials' Committee D30 on High Modulus Fibers and Their Composites sponsored the conference. S. W. Tsai, A

Material Properties and Applications

HUGONIOT PRESSURE LOADING IN SOFT BODY IMPACTS

Brice N. Cassent1979-01-01OpenAlex

In en effort to increase the structural efficiency of aerospace vehicles, r ecent designsx have been making use of low density, high etrength, brittle materials. Ae a result, the vehicle structure ie considerably more suscept ible to ,damage due to impact loadings. Aircraft impact loadings can be divided into two type…

High-Velocity Impact and Material BehaviorElectromagnetic Launch and Propulsion Technology

Preparation of Ferrite Powders by Chemical Methods—A Review

Ramji Lal、P. Ramakrishnan1979-01-01Transactions of the Indian Ceramic Society

The preparation of powder plays an important role in the manufacture of sintered ferrites. The characteristics of the ferrite powders are influenced by method of preparation which subsequently influence the properties of finished products. Various chemical methods such as conventional coprecipitation, spray drying, py…

Magnetic Properties and Synthesis of Ferrites

Oriented inclusions in single crystals of potassium dihydrogen phosphate

M. S. Joshi、Andrea Antony1979-01-01Kristall und Technik

Abstract Different forms of oriented inclusions in single crystals of potassium dihydrogen phosphate (KDP) grown by gel method and from aqueous solutions are reported. Small rod like chain and channel types of liquid inclusions are illustrated. These inclusions are oriented along 〈001〉, 〈011〉 and 〈010〉 directions and…

Crystallography and molecular interactionsCrystallization and Solubility StudiesChemical and Physical Properties in Aqueous Solutions

Interaction of Oxidation and Creep in Zircaloy-2

B. Burton、A.T. Donaldson、G.L. Reynolds1979-01-01OpenAlex

In the event of a loss-of-coolant accident in water-cooled reactors, the Zircaloy-2 cladding is subjected to a rapid increase in temperature and stress in an oxidizing environment. Accurate numerical values of creep parameters are thus required for use in tube deformation models that predict fuel cladding behavior dur…

Nuclear reactor physics and engineeringHigh Temperature Alloys and CreepNuclear Materials and Properties

High-temperature thermodynamic properties of the thorium-oxygen system

R.J. Ackermann、M. Tetenbaum1979-01-01OpenAlex

The thermodynamic properties of the thorium-oxygen system at high temperatures have been investigated by means of mass effusion, mass spectrometric, and transpiration techniques over compositions ranging from the congruently vaporizing composition to the lower phase boundary composition. A very sharp decrease in oxyge…

Radioactive element chemistry and processingNuclear Materials and PropertiesNuclear materials and radiation effects

The Effect of Oxygen Potential on the Surface Self-Diffusion Coefficient of Silver

Kazuhiro Yoshihara、Kazuyoshi Nii1979-01-01Transactions of the Japan Institute of Metals

The surface self-diffusion coefficient of silver was measured by the grain boundary grooving method in atmospheres with various oxygen potentials. In an argon atmosphere with PO2=10−11 Pa, the surface self-diffusion coefficient can be expressed by the following equation:Ds=0.249exp(−166kJ/mol·RT)m2⁄s(973–1073K).This e…

High-Temperature Coating BehaviorsCopper Interconnects and Reliabilitynanoparticles nucleation surface interactions

Optical Studies on Williams Domains

D. Krishnamurti、D. Revannasiddaiah1979-01-01Molecular crystals and liquid crystals

The paper discusses the interference studies carried out on Williams domains in the case of N-(p-propoxybenzylidene) p-pentylaniline. Measurements of the periodic variation of the orientation of the director in the nematic medium are reported.

Liquid Crystal Research AdvancementsNonlinear Optical Materials ResearchPhotochromic and Fluorescence Chemistry

Kinetics on the Formation and Transformation of Alkoxy-derived SrSiO3

Osamu Yamaguchi、Kenzo Matsumoto、Kiyoshí Shimizu1979-01-01Bulletin of the Chemical Society of Japan

Abstract A metastable modification of SrSiO3 was formed at 850–910 °C from mixed powders prepared by the alkoxy-method. Crystallization isotherms were best described by the first-order equation and the activation energy was determined as 130 kcal/mol. The kinetics on the transformation of metastable to stable SrSiO3 w…

Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisCatalysis and Oxidation Reactions

Crystal structure of anhydrous aluminum sulfate.

Etsuro KATO、Keiji Daimon1979-01-01Journal of the Ceramic Association Japan

The detailed crystal structure of anhydrous aluminum sulfate, Al2(SO4)3, has been determined from X-ray powder diffraction with well crystallized powder sample. The grain was rhombohedron in shape and surrounded by crystal-faces of {0 1 1 2} planes. The unit cell was assigned to hexagonal symmetry with a0=8.032Å, c0=2…

Crystallization and Solubility StudiesChemical Synthesis and CharacterizationX-ray Diffraction in Crystallography

Studies on the thermal decomposition of phthalic acid esters. IV. Thermal decomposition of mono(2-ethylhexyl)phthalate.

Katsuhiko Saido、Shigeyasu Motohashi、Takeshi Kuroki 等 6 位作者1979-01-01Chemical and Pharmaceutical Bulletin

The thermal behavior of mono (2-ethylhexyl) phthalate (monoester) was investigated in a batch system over the temperature range from 80 to 250°. After a 12 hr reaction period, around 7% of the monoester was decomposed at 80°. The decomposition reached 50% at 150°and 90% at 250°. The reaction products were bis (2-ethyl…

Thermal and Kinetic AnalysisPolymer Science and PVCChemistry and Chemical Engineering

Evaluation of Cotton/Kevlar® Blends

P. L. Rhodes、C.O. Graham1979-01-01Textile Research Journal

Tests were made of Kevlar® fiber blends of 5, 10, 15, and 20% with cotton. The processing efficiency of cotton/Kevlar blends compared favorably with that of blends of cotton with 15, 25, 35, and 50% of polyester or 15% nylon. Lower twists were required for yarns spun from the cotton/Kevlar blends for optimum strength,…

Textile materials and evaluations

Helium migration in alkali germanate glasses

James E. Shelby1979-01-01Journal of Applied Physics

Helium permeability, diffusivity, and solubility have been measured for sodium, potassium, rubidium, and cesium germanate glasses, and for one series of sodium-potassium germanate glasses. In each case, the helium permeability and diffusivity exhibit minima in the property-composition curves. These minima shift to gre…

Material Dynamics and PropertiesGlass properties and applicationsAdvanced Condensed Matter Physics