P. Neufeld、D. M. Southall1976-01-01Transactions of the IMF
SummaryThe electropolishing of austenitic stainless steel in phosphoric acid and phosphoric-sulphuric acid mixtures has been studied with special reference to the formation of pits under conditions when gas is being evolved from the surface. These pits can be distinguished from other sorts of etching effect since they…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsElectrodeposition and Electroless Coatings
J. Holvast、J.H.M. Stoelinga、P. Wyder1976-01-01Ferroelectrics
The far-infrared spectra of the layer structure compounds of the type (C n H2n+1NH3)2MCl4, n = 1, 2, 3,…, M = Cu, Cd, have been measured in the region of 10–400 cm−1 as a function of the temperature between 1 and 300 K. The rather involved spectra of the compounds investigated are due to the normal lattice modes of th…
Nonlinear Optical Materials ResearchOrganic and Molecular Conductors ResearchSolid-state spectroscopy and crystallography
P. Bastie、Jean Bornarel、J. Lajzérowicz 等 4 位作者1976-01-01Ferroelectrics
Physical properties of the organic material tanane1 do not allow sufficiently accurate polarization measurements. As an alternative, the following order parameters were studied: spontaneous shear strain x 6, (linearly coupled to spontaneous polarization P 3), and spontaneous birefringence Δn 6, shown to be proportiona…
Liquid Crystal Research AdvancementsNonlinear Optical Materials ResearchSilicone and Siloxane Chemistry
K. S. Alexandrov、A. T. Anistratov、D. X. Blat 等 8 位作者1976-01-01Ferroelectrics
The accurate measurements of the properties of NH4HSO4 and RbHSO4 were carried out. A statistical theory of the ferroelectric transitions is proposed.
Crystal Structures and PropertiesSolid-state spectroscopy and crystallographyX-ray Diffraction in Crystallography
Robin J. H. Clark、William R. Trumble1976-01-01Journal of the Chemical Society Dalton Transactions
Resonance-Raman (r.r.) spectra are reported for a series of mixed-valence compounds of antimony. With Cs2[SbCl6]· Rb2[SbCl6], or Cs4[SbBiCl12], several overtone and combination tone progressions, in which the progressing fundamental is ν1(a1g) of the [SbCl6]– ion, have been observed on irradiation within the contour o…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsSolid-state spectroscopy and crystallography
Tanja Duplančić、Drago Gradenić、B. Kamenar 等 5 位作者1976-01-01Journal of the Chemical Society Dalton Transactions
Crystals of bis(ethylenediamine)mercury(II) diperchlorate, (I), are monoclinic, a= 7.754(6), b= 11.618(7), c= 7.754(6)Å, β= 100.38(3)°, space group P21, Z= 2. In the complex cation the mercury ion is co-ordinated by four nitrogen atoms (Hg–N 2.30–2.33 Å) in a distorted tetrahedron (N–Hg–N ring angles 77.2 and 78.5°).…
Metal complexes synthesis and propertiesCrystal structures of chemical compoundsMagnetism in coordination complexes
J. D. Hanawalt1976-01-01Advances in X-ray Analysis
Three powder mixtures, each composed of four or more phases, were submitted for phase identification by x-ray diffraction. Laboratory technicians supplied tables of “d” values and of relative intensities as obtained separately and independently by use of the diffractometer, the Debye camera and the Guinier camera. The…
X-ray Diffraction in CrystallographyPowder Metallurgy Techniques and Materials
K. Linga Murty、E.O. Hall1976-01-01OpenAlex
“Blue brittle” or dynamic strain-aging studies were carried out on mild steel in vacuum-annealed, irradiated, and irradiated decarburized conditions. The effect of neutron damage is to decrease or eliminate the concentration of free interstitial impurity elements responsible for locking the dislocations. Progressively…
Microstructure and Mechanical Properties of SteelsFusion materials and technologiesNuclear Materials and Properties
F. H. Otey1976-01-01Polymer-Plastics Technology and Engineering
Although numerous developments have been reported on how starch can be used to make plastics, these have failed to achieve large-scale market reality, largely because better and lower cost plastics can be made from other raw materials, particularly petroleum. Decreasing availability and increasing prices of convention…
biodegradable polymer synthesis and properties
F. M. Michel-Calendini、L. Castet1976-01-01Ferroelectrics
The electronic structure of ABO3 cubic perovskite-type oxides are determined by a modified tight-binding method. The imaginary part of the dielectric constant ε2 and the moments of ε2 provide a quantitative interpretation of optical data. Constant energy surfaces near the conduction band minimum are warped spheres. Th…
Ferroelectric and Piezoelectric MaterialsMicrowave Dielectric Ceramics SynthesisElectronic and Structural Properties of Oxides
T. H. Khoe、E. N. Frankel1976-01-01Journal of the American Oil Chemists Society
Abstract New polyols of high hydroxyl content and reactivity were made from linseed and soybean oils and acids by catalytic carboxylation followed by reaction with diethanolamine. Urethane foams made with these diethanolamides were stronger than those made with castor oil at equivalent polyol wt. Because of their high…
Polymer composites and self-healingSynthetic Organic Chemistry MethodsCarbon dioxide utilization in catalysis
Tairo Oshima、Yoshiyuki Sakaki、Nobuyuki Wakayama 等 6 位作者1976-01-01Proceedings of the Fourth International Symposium on Polarization Phenomena in Nuclear Reactions
Mechanism of thermophily has been the object of biochemical interest for many years, but has not been clearly answered at the molecular level. Most of the studies have been done using a moderate thermophile, Bacillus stearothermophilus which grows optimally at 60–65°C. Studies on more rigorously thermophilic bacterium…
Protein Structure and DynamicsBacteriophages and microbial interactionsEnzyme Structure and Function
G. Sandrock、J.J. Reilly、J R Johnson1976-01-01University of North Texas Digital Library (University of North Texas)
Hydriding alloys based on the intermetallic compound FeTi have potential for the safe and convenient storage of hydrogen, both for mobile and stationary applications. Optimum technical and economic use of these alloys requires an understanding of the physical metallurgy of the system and its relation to the hydriding…
Aluminum Alloy Microstructure PropertiesHydrogen Storage and MaterialsMolten salt chemistry and electrochemical processes
B. W. Wood、H. F. Perkins1976-01-01Soil Science Society of America Journal
Abstract Samples of plinthic horizons from five soil series were collected in the Southern Coastal Plains Province of Georgia. Plinthite and various colors of soil material in each horizon were separated and analyzed for particle size distribution, Fe 2 O 3 content, and mineralogy. Iron segregation is greater in plint…
Groundwater and Isotope GeochemistryClay minerals and soil interactionsIron oxide chemistry and applications
G. Menges、G. Wübken、B. Horn1976-01-01Aktuelle Probleme der Polymer-Physik
Thermoplastische Spritzgußteile weisen eine außerordentlich starke Inhomogenität und Anisotropie der Formteileigenschaften auf. Die Inhomogenität ist über dem Formteilquerschnitt wesentlich stärker ausgeprägt als längs des Fließwegs. Die Verarbeitungsbedingungen beeinflussen die innere Struktur erheblich. Daher ist es…
Polymer crystallization and propertiesComposite Material MechanicsFiber-reinforced polymer composites
Kentaro Takahashi、Norio Mochida、Hidemasa MATSUI 等 5 位作者1976-01-01Journal of the Ceramic Association Japan
The binary glasses were prepared in the SiO2-PO5/2 system containing 0-64.2 and 95.7-100mol% PO5/2, and in the GeO2-PO5/2 system containing 0-48.8mol/ PO5/2.In the binary SiO2-PO5/2 glasses the transformation temperature (Tg) and the Vickers microhardness (Hv) decreased sharply up to about 30mol% PO5/2 because of intr…
Glass properties and applicationsPigment Synthesis and PropertiesMaterial Science and Thermodynamics
K. L. Mittal、D. F. O'Kane1976-01-01The Journal of Adhesion
Coupling agents are primarily used to: (a) promote adhesion between the adherends and adherates1 or reinforcing media in the case of composites; (b) maintain improved adhesion as a function of aging; and (c) protect against the deleterious effects of water and corrosive environments. Silanes are the most commonly used…
Surface Modification and SuperhydrophobicitySynthesis and properties of polymersSilicone and Siloxane Chemistry
Masaharu Takeuchi、Yoshiro Iwama1976-01-01Transactions of the Japan Institute of Metals
The anisotropy measurement combined with magnetic measurement and electron microscopy is performed on monocrystalline Alnico alloys with various contents of Ti and Co, to examine the effects of these constituents, especially of Ti, upon the high coercivity in Alnico alloys. The shape anisotropy constant, Ku* increases…
Electric Motor Design and AnalysisMagnetic Properties and ApplicationsMagnetic Properties of Alloys
Francisco Eiichi Fujita1976-01-01Transactions of the Japan Institute of Metals
The behaviour of interstitial atoms of light elements in the iron lattice are discussed and classified, particularly in regard to their influence on the bonding nature of the iron lattice and their tendency of formation of platelet clusters. According to this general consideration the stress induced clustering of hydr…
Hydrogen embrittlement and corrosion behaviors in metalsNuclear Materials and PropertiesMaterial Properties and Failure Mechanisms
Craig Maze、Dave Johnson1976-01-01Molecular crystals and liquid crystals
A non-linear least squares technique was used to determine k 11, k 33, ε1 and ε2 by comparing data from a single birefringence vs. voltage experiment. Liquid crystal optical cells with parallel orientation were used to generate the birefringence-voltage curve from which the parameters were determined. Cell thickness w…
Liquid Crystal Research AdvancementsOptical Polarization and EllipsometryMolecular spectroscopy and chirality