Md. Mahbubul Haque1970-01-01Daffodil International University Journal of Science and Technology
Threads per inch and yarn count are some of the most important parameters that affect both weaving performance and fabric property. Experimental studies were conducted by weaving fabrics with three different picks per inch (PPI) and weft counts. The study shows that weaving performance is affected by the too high cove…
Textile materials and evaluations
KMZ Hossain、AM Sarwaruddin Chowdhury1970-01-01Daffodil International University Journal of Science and Technology
Natural rubber latex (NRL) and n-butyl acrylate (n-BA) were blended and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature. The stabilizing effect was determined by measuring the pH and viscosity of NRL with n-BA with the storage time of five weeks. The cross-link density, swellin…
Polymer Nanocomposites and Propertiesbiodegradable polymer synthesis and propertiesPolymer Nanocomposite Synthesis and Irradiation
J.R. Coaton1970-01-01Proceedings of the Institution of Electrical Engineers
Since the innovation of the practical tungsten-halogen lamp employing iodine as the regenerating agent, there has been continuous research and development in this field of lamp technology. Although there are still gaps in our knowledge, particularly regarding the kinetics of certain reactions, there is now a far bette…
Catalytic Processes in Materials Science
V. J. Mulley、C. D. Cavendish1970-01-01The Analyst
A thermogravimetric method is described for the quantitative analysis of mixtures of calcium hydrogen orthophosphate dihydrate (brushite) and anhydrous calcium hydrogen orthophosphate (monetite) based on their loss of water on heating. An extension to the method when the above system contains a third component of know…
Thermal and Kinetic AnalysisChemical Thermodynamics and Molecular Structure
W.J. Mader、Takeru Higuchi1970-01-01C R C Critical Reviews in Analytical Chemistry
(1970). Phase Solubility Analysis. C R C Critical Reviews in Analytical Chemistry: Vol. 1, No. 2, pp. 193-215.
Crystallization and Solubility Studies
A. Koma、Shōji Tanaka1970-01-01physica status solidi (b)
Abstract E. Takimoto The shapes of the asymmetric etch pits produced by slow action of hot sulfuric acid on the cleavage planes of tellurium crystals have been investigated, and a microscopic model is proposed for the formation of the etch pits. The handedness of the spiral chains and the positive direction of the x ‐…
Spectroscopy and Quantum Chemical StudiesPhase-change materials and chalcogenidesSolid-state spectroscopy and crystallography
RAKHSA PANDIT1970-01-01Nusantara Bioscience
Abstract. Pandit R. 2015. Green synthesis of silver nanoparticles from seed extract of Brassica nigra and its antibacterial activity. Nusantara Bioscience 7: 15-19. We report the green synthesis of silver nanoparticles using seed extract of Brassica nigra. UV-visible spectroscopic analysis showed the absorbance peak a…
Nanoparticles: synthesis and applicationsGraphene and Nanomaterials ApplicationsNanotechnology research and applications
Wayne L. Carrick1970-01-01Journal of Polymer Science Part A-1 Polymer Chemistry
Abstract Treatment of a cyclohexane solution of low density polyethylene and polystyrene with anhydrous aluminum chloride causes chemical reaction between the two polymers which results in the formation of a graft copolymer. The initial copolymer‐forming reaction is very rapid, and prolonged contact of the polymers wi…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesPolymer Science and PVC
I. Pollini、G. Spinolo1970-01-01physica status solidi (b)
Abstract The intrinsic optical absorption spectrum of CrCl 3 has been investigated in the 0.6 to 6 eV region at temperatures from 80 to 300 °K. A careful analysis of the crystal field bands in the 0.6 to 3 eV region has revealed some structures and details, such as an Urbach's rule edge, not previously reported. The o…
Advanced Chemical Physics StudiesLuminescence Properties of Advanced MaterialsChalcogenide Semiconductor Thin Films
John E. Lewis1970-01-01physica status solidi (b)
Abstract The room temperature magnetic susceptibility of non‐stoichiometric GeTe has been measured; by calculating the contributions of the free carriers and the ionic lattice using the appropriate formulae and the known parameters of the system, the contribution to the susceptibility of the lattice defects has been o…
Chalcogenide Semiconductor Thin FilmsPhase-change materials and chalcogenidesAdvanced Semiconductor Detectors and Materials
E.A. Little、Dennis Harries1970-01-01Metal Science Journal
The effects of interstitial nitrogen on the hardening produced in mild steels by irradiation at 50° C (323 K) to doses up to 2·6 × 1018 n/cm2 (fission) have been investigated. These studies were performed using annealed silicon-killed steel with a finite concentration of nitrogen in solution, annealed silicon-killed s…
Metal and Thin Film MechanicsMicrostructure and Mechanical Properties of SteelsFusion materials and technologies
Niharika Mohanta、S.K. Acharya1970-01-01International Journal of Engineering Science and Technology
In this present work, the effect of stacking sequence on mechanical properties of untreated luffa cylindrica and glass fibre reinforced epoxy hybrid composites has been investigated experimentally. Composite laminates were fabricated by hand lay-up technique. All the composites were made with a total of 4 plies, by va…
Mechanical Behavior of CompositesNatural Fiber Reinforced CompositesMechanical Engineering and Vibrations Research
R. D. Cowling、H.E. Hintermann1970-01-01Journal of The Electrochemical Society
In , the anodic dissolution of titanium carbide begins at about 0.8V ( SHE ). Trivalent titanium ions could not be detected in the nitrogen‐ saturated solution, although this does not rule out the possibility that Ti(III) is formed in the dissolution reaction. However, at 0.8V oxidation to Ti(IV) would readily occur.…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsAdvanced materials and composites
M Muniruzzaman、MBR Chowdhury1970-01-01Bangladesh Journal of Veterinary Medicine
The sensitivity of certain local medicinal herbs was evaluated against pathogenic Aeromonas hydrophila, Pseudomonas fluorescens and Edwardsiella tarda bacteria of fish during the period from April 2001 to March 2002. A suspension of freshly cultured experimental bacteria (2 x 107 CFU / ml) was prepared and 0.1 ml of t…
Essential Oils and Antimicrobial ActivityPhytochemistry and Bioactive CompoundsMorinda citrifolia extract uses
G. E. Lofgren1970-01-01Geological Society of America Bulletin
Research Article| February 01, 1970 Experimental Devitrification Rate of Rhyolite Glass GARY LOFGREN GARY LOFGREN Geology Branch TH2, NASA Manned Spacecraft Center, Houston, Texas 77058 Search for other works by this author on: GSW Google Scholar Author and Article Information GARY LOFGREN Geology Branch TH2, NASA Man…
Geological and Geochemical AnalysisGlass properties and applicationsGeological Modeling and Analysis
R. Prins1970-01-01Journal of the Chemical Society D Chemical Communications
The magnitude of the extinction coefficient and the shift on substitution show that the band at 16,200 cm–1 in the absorption spectrum of Fe(C5H5)2+, which formerly was attributed to a 3d–3d ligand-field transition, is due to a ligand-to-metal e1u→e2g charge-transfer transition.
Magnetism in coordination complexesPhotochemistry and Electron Transfer StudiesLanthanide and Transition Metal Complexes
Saburo Mori1970-01-01Journal of the Physical Society of Japan
Various barium orthoferrates over wide Fe 4+ concentrations were prepared and their magnetic properties were investigated. The hexagonal phase with large Fe 4+ concentration is ferromagnetic above the anomaly point. With increasing Fe 3+ , it tends to be antiferromagnetic. The cubictetragonal phases are paramagnetic w…
Magnetic and transport properties of perovskites and related materialsAdvanced Condensed Matter PhysicsMagnetic Properties of Alloys
Dmitri Shumigin、Elvira Tarasova、Andres Krumme 等 4 位作者1970-01-01Materials Science
In our work we studied composites of poly(lactic) acid (PLA) and low density polyethylene filled with cellulose fibres. The studied composite materials were manufactured with a twin-screw extruder. The extruded compound was processed in to samples using compression moulding. The content of cellulose in polymer/cellulo…
Natural Fiber Reinforced Compositesbiodegradable polymer synthesis and propertiesPolymer Foaming and Composites
H. Overhof、U. Rößler1970-01-01physica status solidi (b)
Abstract The electronic band structures of PbS, PbSe, and PbTe have been calculated using the relativistic Green's function method. The choice of a relativistic atomic potential for Pb and of nonrelativistic atomic potentials for S, Se, and Te inthe muffin‐tin spheres results in similar band models for the lead salts.…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin FilmsSurface and Thin Film Phenomena
Morris Cohen1970-01-01Transactions of the Japan Institute of Metals
Attention is directed to the uncertain state-of-affairs surrounding the influence of plastic deformation on concommitant tracer-diffusivity in metals. We now offer some clarification of this elusive solid-state transport problem.It is concluded that strain-enhanced diffusion is a real phenomenon, and in fact, it can b…
Microstructure and mechanical propertiesHigh Temperature Alloys and CreepAdvanced Materials Characterization Techniques