A. S. Penfold、J. E. Leiss1959-06-01Physical Review
The problem of obtaining a photonuclear cross section from a yield curve measured with a bremsstrahlung beam is discussed. This paper constitutes part of a larger report on the same subject containing numbers enabling cross-section analysis in the energy range 2 Mev to 1 Bev.
Advancements in Photolithography TechniquesElectron and X-Ray Spectroscopy TechniquesNuclear Physics and Applications
Frank S. Ham1959-06-01Journal of Applied Physics
The kinetic theory for the rate of stress-assisted precipitation on dislocations is re-examined in order to extend the work of Cottrell and Bilby. Two approximate expressions are used for the elastic interaction between a solute atom and edge and screw dislocations: V=−A sinθ/r and V=−B/r, respectively. The resulting…
Microstructure and mechanical propertiesHydrogen embrittlement and corrosion behaviors in metalsHigh Temperature Alloys and Creep
Equipo Editorial1959-06-01Materiales de Construccion
Francisco Arredondo1959-06-01Materiales de Construccion
Not available
T. C. Powers1959-06-01Materiales de Construccion
Not available
Pablo García de Paredes y Gaibrois1959-06-01Materiales de Construccion
Not available
C.J. Engberg、E.H. Zehms1959-06-01Journal of the American Ceramic Society
Thermal‐expansion data on Al 2 O 3 , BeO, MgO, B 4 C, SiC, and TiC were obtained to the temperatures where permanent deformation begins, due to sintering or other causes. The thermal expansion for these materials was found to be approximately linear over the measured temperature range. But as a linear extrapolation to…
Aluminum Alloys Composites PropertiesAdvanced ceramic materials synthesis
R. C. Hall1959-06-01OpenAlex
The anisotropy and magnetostriction of single crystals of several ferromagnetic materials have been determined experimentally. The materials include the metals iron and nickel, binary alloys of nickel iron, silicon iron, aluminum iron, cobalt nickel, and cobalt iron, ternary alloys of molybdenum nickel iron, nickel co…
Magnetic Properties and ApplicationsMagnetic properties of thin filmsMagnetic Properties of Alloys
R. I. Scace、Glen A. Slack1959-06-01OpenAlex
The solubility of carbon in silicon has been measured over the temperature range 1560 to 2900°C. The enthalpy of solution is 59±3 kcal/mole. A phase diagram for the system Si–C is presented, embodying these solubility data as well as the results of other high-temperature experiments with silicon carbide. It is found t…
Silicon Nanostructures and PhotoluminescenceDiamond and Carbon-based Materials ResearchAdvanced ceramic materials synthesis
Changhao Liang、R. H. Marchessault1959-06-01OpenAlex
Abstract The infrared spectra of oriented films of valonia cellulose and of ramie and bacterial cellulose crystallites have been observed in the 3 μ region. Polarization properties of the bands have also been determined. The differences between the polarized spectra of bacterial and ramie crystallites in this region a…
Advanced Cellulose Research StudiesLignin and Wood ChemistryBiofuel production and bioconversion
Akio Yoshimori1959-06-01OpenAlex
A new type of antiferromagnetic spin arrangement, which is theoretically possible in the rutile type crystal and seems to be realized in polianite, MnO 2 , is proposed. This spin arrangement, which will be named the screw-type structure , consists of spins screwing along the four-fold crystalline axis. The stability r…
Multiferroics and related materialsSolid-state spectroscopy and crystallographyAdvanced Condensed Matter Physics
D. Hüll、D E Rimmer1959-06-01OpenAlex
The effect of combined hydrostatic pressure, P, and of uniaxial tension, [sgrave], on the rupture time of polycrystalline copper wire in the temperature range 400° to 500°c has been determined. All the specimens broke by intergranular fracture, due to the growth of voids along grain boundaries. Preliminary experiments…
Microstructure and mechanical propertiesElectromagnetic Effects on MaterialsMechanical stress and fatigue analysis
G. Fehér1959-06-01OpenAlex
The ground-state wave function of the antimony, phosphorus, and arsenic impurities in silicon has been investigated by means of the electron nuclear double resonance (ENDOR) method. By this method the hyperfine interactions of the donor electron with the ${\mathrm{Si}}^{29}$ nuclei situated at different lattice sites…
Crystallography and Radiation PhenomenaElectron Spin Resonance StudiesSolid-state spectroscopy and crystallography
G. Bonfiglioli、P. Brovetto、C. Cortese1959-05-15Physical Review
After a critical review of the present state of knowledge about thermoluminescence, which is shown to be rather unsatisfactory, the present paper considers in detail thermoluminescence arising from thermal bleaching of $F$-centers in irradiated alkali halides. A model is proposed, which leads to second-order kinetics…
Luminescence Properties of Advanced MaterialsInorganic Fluorides and Related CompoundsAdvanced Chemical Physics Studies
Peter Carruthers1959-05-15Physical Review
A theory of the scattering of phonons by static elastic strain fields is presented. It is found that the Fourier component of the strain field plays a role similar to that of the potential in the external field approximation. All quantities (except the strain field) in the formulas obtained refer to specifically atomi…
Machine Learning in Materials ScienceBoron and Carbon Nanomaterials ResearchThermal properties of materials
S. W. Ferris、S. S. Kurtz、J. S. Sweely1959-05-01Rubber Chemistry and Technology
Abstract The tendency for stretched rubber, when subjected to outdoor exposure, to form cracks perpendicular to the direction of stress was originally known as suncracking. The work of Newton showed that light was not necessary and identified ozone as the causative agent. That ozone is the principal factor there seems…
Textile materials and evaluationsPolymer crystallization and propertiesMechanical Behavior of Composites
K. Greenwood、G. N. Vaughan1959-05-01Journal of the Textile Institute Transactions
It is shown that long-period count variations in the weft yarn cause variations in pickspacing which to some extent compensate for the effect of yarn irregularity on the weft cover factor. The significance of this fact in relation to the diagnosis of weft bars, to fabric design, and to loom design, pointed out. It is…
Dyeing and Modifying Textile FibersTextile materials and evaluationsMaterial Properties and Processing
Ichiji Obinata、Y. Takeuchi、Rokur ocirc Kawanishi1959-05-01OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)
To obtain an equilibrium between titanium and magnesium at high temperatures, an air-tight titanium container, in whlch a magnesium rod or a mixture of titanium and magnesium in equal parts was placed, was heated to various temperatures up to 1200 C. The results of microscopic, x-ray, and electron diffraction studies…
Metallurgical and Alloy ProcessesMagnesium Alloys: Properties and ApplicationsIntermetallics and Advanced Alloy Properties
Shǒji Narita、S. Ichinohe、S. Enomoto1959-05-01Journal of Polymer Science
Abstract In order to assign the CH, CH 2 ‐vibration modes and the skeletal modes in the spectrum of polyvinyl chloride, we obtained deuterated polyvinyl chloride and the infrared spectrum of it, and we assumed that frequencies of the skeletal modes and the C‐Cl stretching modes may not change drastically by deuteratio…
Polymer Science and PVC
Irving Fatt1959-05-01The Journal of Physical Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTPore Structure of Sintered Glass from Diffusion and Resistance MeasurementsI. FattCite this: J. Phys. Chem. 1959, 63, 5, 751–752Publication Date (Print):May 1, 1959Publication History Published online1 May 2002Published inissue 1 May 1959https://pubs.acs.org/doi/10.1021/j150…
Glass properties and applicationsMaterial Dynamics and PropertiesTheoretical and Computational Physics