Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The purpose of the paper was to evaluate the resistance to high temperature corrosion of laser welded joints of finned tubes made of austenitic steel (304,304H) and nickel alloys (Inconel 600, Inconel 625). The scope of the paper covered the performance of corrosion resistance tests in the atmosphere of simulated exha…
The investigations on microstructure of P92 steel in the as-received condition and after 105 h ageing at 600 and 650 °C were carried out. For the recorded images of microstructure, the quantitative analysis of precipitates was performed. On that basis, a statistical analysis of collected data was made with the aim of…
In this study, a three-dimensional finite element (FE) model for armchair, zigzag and chiral single-walled carbon nanotubes (SWCNTs) is proposed. To create the FE models, nodes are placed at the locations of carbon atoms and the bonds between them are modeled using three-dimensional elastic beam elements. The FE model…
The extrinsic properties of NdFeB-based magnets can be tuned through partial substitution of Nd by another rare-earth element and Fe by Co, as such substitution leads to a modification in the intrinsic properties of the main phase. Optimisation of a magnet's composition through trial and error is time consuming and no…
The recovery of precious metals is necessary for environmental and economic reasons. Spent catalysts from automotive industry containing precious metals are very attractive recyclable material as the devices have to be periodically renovated and eventually replaced. This paper presents the method of removing platinum…
The influence of adding different amounts of silicon carbide on the properties (density, transverse rupture strength, microhardness and corrosion resistance) and microstructure of low alloy steel was investigated. Samples were prepared by mechanical alloying (MA) process and sintered by spark plasma sintering (SPS) te…
Copper reduction represents one of the steps in the process of fire refining of blister copper. Process of copper reduction with natural gas as performed in the anode furnace was modeled. Numerical analysis was conducted using the IPSA (Inter- Phase-Slip Algorithm) module of PHOENICS package and standard turbulent mod…
The investigations concerned the structural analysis of the AlCrSiN coating deposited by arc Physical Vapour Deposition method on the X40CrMoV5-1 hot work tool steel substrate. The deposition process was carried out on a device equipped with a technique of lateral, rotating cathodes. The nano/microstructure, phase ide…
The core-shell carbon microspheres(CMSs)/polyethylene terephthalate(PET) capsule (PCMSs) by in situ polymerization was selected as flame retardant. The flame-retardant PCMSs/PET functional fiber was prepared by melt spinning method. The structure and properties of PET fiber with different mass fractions of flame retar…
Fatigue fracture often occurs because of the corrosion damage to aerospace structural aluminum alloy with holes. Fatigue tests of 7075 aluminum alloy of both unchamfered and chamfered double-hole specimens under uncorrosion and 24h pre-corrosion were carried out. The influence of both pre-corrosion damage and orifice…
The tungsten carbide coating with both high hardness and dense microstructure was prepared by optimizing the detonation gun spraying parameters. The phase identifications and microstructure of the coating were observed and analyzed by optical microscope, X-ray diffraction (XRD) and energy dispersive spectrometer (EDS)…
A primer of the bismaleimide resin toughened with block copolymer was prepared. The properties of the primer, such as adhesion, pencil hardness, impact resistance, environment resistant, ageing resistant performance and etc. meet the requirements of the technical specifications of GJB1388. The thermal property of the…
The microstructure and property degradation of turbine blades in aircraft engines during service would finally pose threat to service safety. But report on systematic research work about microstructure and property degradation of serviced turbine blades is limited. In this paper, the 2nd stage turbine blade made of wr…
As-cast microstructures and phase compositions of Mg-3.52Sn-xM and Mg-6.54Sn-xM (M=Al, Zn, Nd, Gd) alloys were investigated by optical microscope, scanning electron microscope and X-ray diffraction. Meanwhile, the tensile mechanical properties were tested. The results show that the coarse dendrite is refined slightly…
The aim of this work was to study the microstructure and functional properties of CuNi2Si1 alloy. The material was prepared classically by melting, casting, hot rolling and cold rolling. The obtained strips were processed with combined operations of supersaturation, ageing and one of the intensive deformation method -…
The presented work focuses on the quantitative description of the spinel phase (NiAl2O4) located into Al2O3 matrix. Three series of samples were prepared. Series I, II and III containing following amount of nickel powder: 0.21% vol, 0.43% vol and 1.3% vol respectively. In order to obtain nickel aluminate spinel sinter…
Twin Roll Casting technology belongs to modern, integrated method of processing aluminum and its alloys. This method includes preparation of liquid metal and its continuous casting between the rotating cylindrical crystallizers, optional homogenizing treatment, cold rolling and optional interoperation or final heat tr…
The article presents the possibility of using twin-spot laser welding (i.e. laser welding with focusing a laser beam on two spots) for making overlap joints made of 0.8-1 mm thick HSLA and DP type high strength steel sheets. Joints were made using a Yb:YAG disc laser having a maximum power of 12 kW and a welding head…
The coatings of FeAlCuCrCoMn high entropy alloy were deposited by direct current magnetron sputtering. The microstructure and the mechanical and corrosion properties of the coatings are investigated. A perfect dense and smooth coating could be obtained. The coatings exhibit single FCC solid solution as increasing depo…
Abstract Mixed ionic and electronic conducting K 2 NiF 4 -type oxide, Nd 2 Ni 1-x Cu x O 4+δ (x=0~1) powders were synthesized by solid state reaction technique and solid oxide fuel cells consisting of a Nd2Ni1-xCu x O 4+δ cathode, a Ni-YSZ anode and ScSZ as an electrolyte were fabricated. The effect of copper substitu…