Kemal Nisancioḡl̄ū1993-01-01Journal of Japan Institute of Light Metals
The cathodic processes localized to iron rich intermetallic phases on commercial aluminum alloys during corrosion in neutral chloride environments are controlled by the structural and compositional changes occurring on these phases in a locally stable alkaline environment. These phenomena are investigated by conventio…
Corrosion Behavior and InhibitionAnodic Oxide Films and Nanostructures
Yutaka Kohno、A. Kohyama、D.S. Gelles 等 4 位作者1993-01-01Materials Transactions JIM
R & D of ferritic/martensitic steels as structural materials for fusion reactor is one of the most important issues of fusion technology. The efforts to characterize microstructural evolution under irradiation in the conventional Fe–Cr–Mo steels as well as newly developed Fe–Cr–Mn or Fe–Cr–W low activation ferritic/ma…
Microstructure and Mechanical Properties of SteelsFusion materials and technologiesDiverse Musicological Studies
Б. М. Даринский、A. S. Sidorkin、S. D. Milovidova1993-01-01Ferroelectrics
The growth regularities of the internal bias field Eb formation have been investigated in pure triglycine sulphate crystals, as well as in crystals doped with chromium or α-alanine. All crystals were grown in the ferrophase from the seed of the pivot form oriented by its axis along the non-polar crystal axis Z. It was…
Nonlinear Optical Materials ResearchCrystallization and Solubility StudiesFreezing and Crystallization Processes
Larry J. Gut、Keywan Lee、John A. Juvik 等 8 位作者1993-01-01Pesticide Science
Abstract The porphyric‐insecticide‐modulating activities of 1,10‐phenanthroline and eight of its analogs were investigated. The insecticidal efficacy of these compounds was closely associated with their ability to enhance the conversion of exogenous δ‐aminolevulinic acid (ALA) to protoporphyrin IX (Proto). As observed…
Porphyrin and Phthalocyanine ChemistryMetal-Catalyzed Oxygenation MechanismsPorphyrin Metabolism and Disorders
Leonid K. Filippov1993-01-01Journal of the Chemical Society Faraday Transactions
A theory of diffusion in films of variable thickness is developed. Approximations for the short-time and long-time dependences of solvent concentration in the film are derived. Diffusion in thin films has been investigated by ellipsometry. The diffusion coefficients for different temperatures were calculated using asy…
Phase Equilibria and ThermodynamicsMaterial Dynamics and PropertiesRheology and Fluid Dynamics Studies
RW Birmingham、James A. Wilcox1993-01-01Journal of Engineering Design
The rational design of engineering structures as an optimization process is discussed, highlighting the desirability of identifying the influence of material selection on form at an early stage. Procedures for material selection developed at Cambridge University are examined, then extended to incorporate the manufactu…
BIM and Construction IntegrationInnovations in Concrete and Construction MaterialsMaterial Selection and Properties
作者信息未提供1993-01-01Zeitschrift für Kristallographie - Crystalline Materials
Cristallisation dans Pnma avec a=7,162, b=9,566 et c=6,5029 A, Z=4; affinement jusqu'a R=0,025.
Crystal Structures and PropertiesIron-based superconductors researchInorganic Chemistry and Materials
CJ Bryan、JM Stoltzfus、MV Gunaji1993-01-01OpenAlex
The Space Shuttle launch environment at the John F. Kennedy Space Center is extremely corrosive. Recent corrosion studies have identified Hastelloy B-2, Haynes Alloy C-230, Hastelloy C-22, Hastelloy C-276, Hastelloy G-30, and Inconel 625 as being very resistant to this launch environment. Since several corrosion relat…
Combustion and Detonation ProcessesMaterial Properties and ApplicationsEngineering and Material Science Research
Sachiko Ono、Noboru Masuko1993-01-01Journal of Japan Institute of Light Metals
The structure and the dissolution behavior of porous anodic films formed on aluminum have been studied by electron microscopy with various techniques which include SEM, TEM, replica, ultramicrotomy and ion-thinning methods. Cell walls of films formed in oxalic acid were dissolved uniformly, whereas micro-pores in cell…
Corrosion Behavior and InhibitionAnodic Oxide Films and Nanostructures
J. Amirbayat1993-01-01Journal of the Textile Institute
In the first part of this series, the effects of differences in ply properties and of the mean properties of the plies on seam appearance were examined and discussed. The present part is concerned with the effects of the same factors on seam strength; it also discusses factors affecting fabric strength along different…
Textile materials and evaluationsStructural Analysis of Composite MaterialsMaterial Properties and Processing
A. A. Hodgson1993-01-01The Annals of Occupational Hygiene
Properties, costs and availabilities are reviewed for a number of raw materials in current use, or having potential use, as replacements for asbestos fibre. These include glass fibres and mineral wools; ceramic or refractory fibres; a number of minerals in fibrous or particulate form; and some specific synthetic and n…
Natural Fiber Reinforced CompositesBIM and Construction IntegrationFiber-reinforced polymer composites
Akira Matsushima、Taku Fujimura、Tadaoki ITAKURA1993-01-01Journal of Electromagnetic Waves and Applications
An accurate numerical solution for the electromagnetic scattering from an infinite strip grating is presented, where the strips are loaded with a symmetrical pair of dielectric slabs. The direction of propagation and the polarization of the incident plane wave are arbitrary. The boundary value problem is reduced to a…
Electromagnetic Scattering and AnalysisAdvanced Antenna and Metasurface TechnologiesOptical Coatings and Gratings
Yoshifumi Kita、Masakatsu Misawa、Norimasa Umesaki 等 6 位作者1993-01-01ISIJ International
In order to obtain direct information on the structure of sodium borate melts which are of use in metallurgical processes, pulsed neutron total scattering measurements have been carried out on 10mol%Na2O- and 30mol%Na2O-B2O3 melts at 1073 K, in addition to the previous measurement on pure B2O3 melt. Molecular dynamics…
Glass properties and applicationsGraphite, nuclear technology, radiation studies
Jayesh Vora、Niteen Bapat、Mehdi Boroujerdi1993-01-01Drug Development and Industrial Pharmacy
Microparticles produced from polyisobutylcyano-acrylate (IBCA) and polyglutaraldehyde (PGA) were investigated for their relative affinity and surface characteristics using doxorubicin (DOX) as a model drug. IBCA microparticles have been reported to exhibit neutral hydrophobic surface features, whereas PGA microparticl…
Nanoparticle-Based Drug DeliveryElectrospun Nanofibers in Biomedical ApplicationsPolymer Nanocomposite Synthesis and Irradiation
A. K. Tagantsev1993-01-01Birkhäuser Basel eBooks
Most crystalline solids have phonon spectra that consist of rather sharp lines, i. e. the maximum frequencies are much greater than the half-width of them or in other words, in these crystals, the relative damping of phonons is small. The theory of intrinsic dielectric loss in such crystals is well developed. The deta…
Ferroelectric and Piezoelectric MaterialsAcoustic Wave Resonator TechnologiesMicrowave Dielectric Ceramics Synthesis
R. D. Granata、KJ Kovaleski1993-01-01OpenAlex
Coatings evaluation methodologies using electrochemical impedance spectroscopy (EIS) and chronoamperometry are described for high-performance corrosion protective coating systems. Three types of coating systems were studied: (1) fusion-bonded epoxy, (2) a marine-service epoxy, and (3) a polyimide used in electronics a…
Corrosion Behavior and InhibitionConcrete Corrosion and DurabilitySmart Materials for Construction
Somei Ohnuki、F.А. Garner、Hiroki Takahashi1993-01-01Materials Transactions JIM
A series of Fe–13Cr–15Mn alloys with different nickel levels of 0–15% have been examined by transmission electron microscopy and X-ray microanalysis following irradiation to 17–25 dpa at 693–823 K. All specimens were found to have developed typical features of radiation damage at high temperature; voids, dislocations…
Microstructure and Mechanical Properties of SteelsFusion materials and technologiesHigh Temperature Alloys and Creep
Der-Yang FANG、Chii-Shyang Hwang1993-01-01Journal of the Ceramic Society of Japan
The phenomena in the sintering process of Y2O3-added mullite ceramics and the crystallization behavior of liquid phase in sintered bodies were studied using differential thermal analysis, X-ray powder diffractometry, scanning and transmission electron microscopies. The mullite powder compacts containing 2-10wt% Y2O3 w…
Advanced ceramic materials synthesisIntermetallics and Advanced Alloy Properties
Kohji Kawahara、Nobuo Sakuma、Yasushi Nishizaki1993-01-01Journal of the Japan Institute of Metals and Materials
An attempt has been made to develop the manganese-based and workable damping alloys containing 20 at% copper, together with 2 or 5 at% additive elements, such as nickel, iron, cobalt, vanadium, chromium, zirconium, titanium, aluminum, zinc and tin.Nickel was the most effective element for increasing damping capacity o…
Shape Memory Alloy TransformationsMagnetic Properties and ApplicationsMagnetic Properties of Alloys
Hideki Yamamoto、Kanichi Kamiya、Jun Matsuoka 等 4 位作者1993-01-01Journal of the Ceramic Society of Japan
The coordination state of Ge ions in PbO-GeO2 glasses was examined using EXAFS. It was found that a part of Ge ions changed from 4-fold to 6-fold coordination state on addition of PbO, which had been expected from the property-composition relations. The fraction of 6-fold coordinated Ge ions, N6, increased with increa…
Glass properties and applicationsCrystal Structures and PropertiesPhase-change materials and chalcogenides