Robert A. Mendelson1965-03-01Transactions of the Society of Rheology
The steady-state melt viscosities of both high density and low density polyethylene have been investigated for a series of samples over four decades of shear rate and a range of temperatures from 120°C (150°C for high density samples) to 300°C. In the case of low density polyethylene a broad range of molecular weight…
Polymer crystallization and propertiesRheology and Fluid Dynamics StudiesPolymer Foaming and Composites
S. M. Copley、Joseph A. Pask1965-03-01Journal of the American Ceramic Society
Stress‐strain curves are presented for MgO single crystals, compressed with (100) and (111) stress axes, for temperatures from 1000° to 1600°C. The yield stress of (100) specimens decreases slightly in this temperature range. The strain‐hardening rate passes through a maximum at about 1100°C and decreases by a factor…
Advanced ceramic materials synthesisMicrostructure and mechanical propertiesHigh-Velocity Impact and Material Behavior
C. D. Graham1965-03-01Journal of Applied Physics
Magnetization measurements on a single crystal of gadolinium have established that the Curie temperature Tc is 292.5±0.5°K, that the initial susceptibility is given by 1/χ0=A(T−Tc)43 from Tc to 20° above Tc, and that the magnetization is given by σ=CH¼ at Tc. These results are obtained only if measurements are made al…
High-pressure geophysics and materialsRare-earth and actinide compoundsMagnetic Properties of Alloys
L. Sacconi、Mario Ciampolini、U. Campigli1965-03-01Inorganic Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTMagnetic Investigation of Some Tetracoordinated Nickel(II) and Copper(II) Complexes between 80 and 300°K.L. Sacconi, M. Ciampolini, and U. CampigliCite this: Inorg. Chem. 1965, 4, 3, 407–409Publication Date (Print):March 1, 1965Publication History Published online1 May 2002P…
Magnetism in coordination complexesMolecular spectroscopy and chiralityChemical Thermodynamics and Molecular Structure
G. Blasse1965-03-01Journal of Applied Physics
In oxidic lattices the Co3+ (3d6) ion has been found both in the diamagnetic low-spin state and in the paramagnetic high-spin state. The factors influencing the equilibrium between high- and low-spin Co3+ ions are discussed. New compounds are presented in which the change of the equilibrium distribution among these tw…
Magnetic and transport properties of perovskites and related materialsAdvanced Condensed Matter PhysicsCatalysis and Oxidation Reactions
Miriam Kastner Y. K. Bentor、M. Kastner1965-03-01Journal of Sedimentary Research
Abstract Variability of the physical and chemical properties of pure glauconite is considered. A major cause of the variation in properties is the occurrence of non-structural iron oxides and it is suggested that chemical analyses which have been reported for glauconite should be recalculated. There appears to be an i…
Clay minerals and soil interactionsIron oxide chemistry and applicationsChemical Synthesis and Characterization
Fritz Rodi、D. Babel1965-03-01Zeitschrift für anorganische und allgemeine Chemie
Abstract Calciumiridium(IV)‐oxid existiert in zwei Modifikationen: einer hexagonalen (a = 5,44 1 Å, c = 6,39 2 Å), die beim Tempern einer Mischung von IrO 2 und CaCO 3 entsteht, und einer rhombischen (a = 3,14 5 Å, b = 9,85 5 Å, c = 7,29 3 Å), die in Form von Einkristallen aus einer Schmelze dieser Komponenten mit CaC…
Crystal Structures and PropertiesPolyoxometalates: Synthesis and ApplicationsSolid-state spectroscopy and crystallography
Clinton Frank Jefferson1965-03-01Journal of Applied Physics
The physical properties of the system CuFe2O4–Fe3O4 point to the existence of the compound CuFe5O8. The activation energies Ea of quenched specimens exhibit an anomaly at the composition CuFe5O8. The log of the resistivities plotted as a function of composition changes slope, the Curie temperatures Tc display a minimu…
Theoretical and Computational PhysicsMagnetic Properties and Synthesis of FerritesIron oxide chemistry and applications
Robert T. Conley1965-03-01Journal of Applied Polymer Science
Abstract The initial degradation of phenol–formaldehyde polycondensates has been found to follow two distinct pathways. Oxidation of the dihydroxydiphenylmethane unit to substituted dihydroxybenzophenone and dihydroxybenzhydrol species has been observed and substantiated using model compounds to support the characteri…
Epoxy Resin Curing ProcessesSynthesis and properties of polymersPhotopolymerization techniques and applications
G. W. Brindley、Ryozo Hayami1965-03-01Mineralogical Magazine and Journal of the Mineralogical Society
Summary Forsterite formed from serpentine powders at various temperatures up to 800° C has been measured quantitatively by X-ray diffraction. The results are considered in relation to a reaction mechanism proposed by Ball and Taylor and are shown to be inconsistent with the details of this mechanism. An alternative me…
Concrete and Cement Materials ResearchClay minerals and soil interactionsX-ray Diffraction in Crystallography
H.E. McCoy1965-03-01CORROSION
Oxidation characteristics of Type 304 stainless steel in CO2 were observed over the temperature range 1100-1800 F (593-982 C). Although in general oxidation rate curves were parabolic, several periods were observed in which they were approximately linear. These breaks were reproducible and thought to be associated wit…
Corrosion Behavior and InhibitionHigh-Temperature Coating BehaviorsHydrogen embrittlement and corrosion behaviors in metals
A. R. Payne1965-03-01Journal of Applied Polymer Science
Abstract Electrical conductivity and dynamic shear modulus measurements were made simultaneously on carbon black‐filled natural rubbers. G ′ the in‐phase shear modulus, and the electrical conductivity, C , were shown to vary in an approximately similar way as the amplitude of dynamic oscillation was increased. Both G…
Polymer Nanocomposites and PropertiesHigh voltage insulation and dielectric phenomenaForce Microscopy Techniques and Applications
Charles S. Naiman、Robert Gilmore、B. DiBartolo 等 5 位作者1965-03-01Journal of Applied Physics
Susceptibility measurements have been carried out on single-crystal LaCoO3 in the temperature range of 4.2° to 300°K. We find an effective magnetic moment squared that agrees with Heikes et al. at 300°K, but which falls more rapidly with decreasing temperature. Paramagnetic resonance measurements at 4.2°, 77°, and 300…
Magnetic and transport properties of perovskites and related materialsRare-earth and actinide compoundsAdvanced Condensed Matter Physics
William Fuller Brown1965-03-01Journal of Applied Physics
Standard magnetostriction theory constructs a free energy from three terms: the energy of a rigid magnetized body, the energy of a nonmagnetic elastic body, and the volume integral of an interaction energy-density linear in the strains. This procedure is open to three criticisms. First, strains invalidate the magnetic…
Microstructure and Mechanical Properties of SteelsMagnetic Properties and ApplicationsMagnetic Properties of Alloys
Jacob. Block、A. Gray1965-03-01Inorganic Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTThe Thermal Decomposition of Lithium Aluminum HydrideJacob Block and A. P. GrayCite this: Inorg. Chem. 1965, 4, 3, 304–305Publication Date (Print):March 1, 1965Publication History Published online1 May 2002Published inissue 1 March 1965https://pubs.acs.org/doi/10.1021/ic5002…
Hydrogen Storage and MaterialsAmmonia Synthesis and Nitrogen Reduction
H. Klinge1965-03-01Journal of Soil Science
Summary In the “terra firme” of the Amazon basin near Manaus, podzol soils occur carrying heath forest. The parent materials are geologically young sandy sediments deposited in valleys. There are no indications that man's activity is one of the pedogenetic factors of the podzol development. Podzols have gradational co…
Pesticide and Herbicide Environmental StudiesClay minerals and soil interactionsSoil Management and Crop Yield
H. S. Endicott、B. D. Hatch、R. G. Sohmer1965-03-01IEEE Transactions on Component Parts
The Eyring Model has been used to derive the "power rule" for capacitors. Analytical models for evaluating progressive and step stress tests are presented. Various methods are discussed for determining the value of the exponent for the power rule. In particular, the relation between the exponent of the power rule and…
Advanced MEMS and NEMS TechnologiesHigh voltage insulation and dielectric phenomenaPower Transformer Diagnostics and Insulation
M. H. Loretto、L. M. Clarebrough、R. L. Segall1965-03-01Philosophical magazine
Stacking-fault tetrahedra have been observed in plastically deformed specimens of copper, silver, gold and several alloys. A dislocation reaction is proposed for the formation of these defects during deformation. From the size of the largest tetrahedra, estimates of stacking-fault energy are made which indicate that t…
Microstructure and mechanical propertiesAluminum Alloy Microstructure PropertiesMetal Forming Simulation Techniques
A. Y. Coran1965-03-01Rubber Chemistry and Technology
Abstract The scheme and treatment of the kinetics of scorch-delay vulcanization proposed in a previous paper were applied to natural rubber sulfur vulcanization accelerated by 2,2′-thiobisbenzothiazole (MBTS), 2-(N-cyclohexyl)benzothizaolesulfenamide (CBS), 2-(N-morpholinothio)benzothiazole (MOR), or 2-(N,N-diisopropy…
Polymer Nanocomposites and PropertiesEpoxy Resin Curing ProcessesSynthesis and properties of polymers
L. M. Corliss、J. M. Hastings、R. Nathans 等 4 位作者1965-03-01Journal of Applied Physics
Pratt and Bailey have recently explained the optical and anomalous magnetic properties of Cr2O3 by means of a model consisting of the basic Cr2O3 antiferromagnetic structure with moments canted away from the c axis and forming some kind of spiral. Our neutron powder-diffraction data confirm the original Brockhouse mom…
Advanced Condensed Matter PhysicsX-ray Diffraction in CrystallographyPigment Synthesis and Properties