Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
ADVERTISEMENT RETURN TO ISSUEPREVCommunicationNEXTWell-Defined Triblock Hybrid Dendrimers Based on Lengthy Oligothiophene Cores and Poly(benzyl ether) DendronsPatrick R. L. Malenfant, Lambertus Groenendaal, and Jean M. J. FréchetView Author Information Department of Chemistry, University of California Berkeley, Califo…
XPS spectra acquired on anodized niobium during a thermal treatment from 300 to 1223 K are reported. The anodization process consists of growing a layer of oxide of known thickness on the metal surface; the sample is kept in a solution of ammonia inside an electrochemical cell and a d.d.p. is applied to the electrodes…
An analysis is made of electrostatic systems whose field is formed by two superposed two-dimensional fields with a common plane of symmetry (midplane). It is assumed that these fields overlap in the region where a charged particle beam propagates. The main property of these systems is that they conserve ideally (witho…
Abstract An ethylene‐propylene‐diene rubber (EPDM), containing 5 wt% 5‐ethylidene‐2‐norbornene, was functionalized with maleic anhydride through the Alder Ene reaction at temperatures above 200°C in a co‐rotating twin screw extruder. Characterization of the maleated product included FT‐IR, 1 H and 13 C NMR, and GPC. T…
Journal Article Measurement of Performances of Aerosol Type Radioactive Contamination Monitors Get access L. Grivaud, L. Grivaud Search for other works by this author on: Oxford Academic PubMed Google Scholar S. Fauvel, S. Fauvel Search for other works by this author on: Oxford Academic PubMed Google Scholar M. Chemto…
Abstract Computer simulation techniques have been used to investigate defect formation and the diffusion of Ca and Mg in diopside. It was found that isolated, non-interacting CaO and MgO Schottky defects had the lowest formation energies (3.66 and 3.97 eV respectively); oxygen Frenkel defects are the most favourable o…
X-ray photoemission measurements of CuCO3 are presented.
Thermal conductivity (at 5 to 300 K), dielectric (at 5 to 250 K) and sound velocity (at 5 to 150 K) measurements have been performed for the first time on ceramic samples of Na0.5Bi0.5TiO3. The data revealed a nearly temperature-independent plateau in thermal conductivity λ(T) at about 7 to 30 K and ≈︂0.2 W/mK. This p…
A theoretical study of the magnetic susceptibility of multilayered carbon nanotubes in fields both parallel, H ∥, and perpendicular, H ⊥, to the tube axis has been carried out disregarding electron-electron interaction. The temperature dependences of the magnetic susceptibility obtained exhibit a nontrivial form for H…
We propose simple configurations to measure the thermoelectric power and the four-probe resistivity simultaneously for different types of samples.
An Inconel 718 based alloy containing only trace amounts of C, S, and P was subjected to thermal cycling in a Gleeble 1500 system to induce microstructural features which are produced in the heat affected zone (HAZ) during welding. In the thermally cycled material many grain boundaries were observed to liquate; howeve…
Nano-MgO particles have been introduced into silver-sheathed tapes fabricated by the rod-in-tube process. It is found that the transport properties of the nano-MgO particle doped sample are noticeably improved compared with those of the undoped sample. The irreversibility line of the MgO-doped sample shifts to higher…
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and x-ray photoelectron spectroscopy (XPS) are used to characterize a newly synthesized glycosylated photoactivatable reagent designed for surface glycoengineering. The glycoaryldiazirine reagent MAD-Gal (N-[m-(3-(trifluoromethyl)diazirine-3-yl)phenyl]-4-(-3-th…
A synthesis procedure for preparing palm oil fatty acid additives (POFA's) is described. The performance of these acids in carbon black (CB) filled natural rubber (NR) compounds was examined. The incorporation of POFA's is found to improve mechanical properties of CB filled NR compounds, especially below a concentrati…
A solid-state microactuator was studied using volume change due to redox reaction of poly(pyrrole) film. Pyrrole was electropolymerized on a comb-shaped microelectrode array, and the poly(pyrrole) film was covered by a solid polymer electrolyte, polyethylene glycol. The volume change of the poly(pyrrole) film by elect…
We have employed a phase modulation method using a photoelastic modulator to determine the uniformity and quality of the alignment layer of liquid crystals (LCs). It is demonstrated that a two-dimensional map of the phase retardation, associated with irregular rubbing and/or chemical contaminants, provides invaluable…
Stress concentration in ceramic‐matrix composites due to fiber‐matrix fusion is investigated using finite‐element modeling (FEM) in conjunction with experiment. FEM results indicate substantial stress concentration can be expected when the fiber and matrix are locally fused. The focus of the investigation is sealing t…
The irreversible behaviour of the pinning-induced magnetostriction of a cylindrical superconductor placed in a parallel magnetic field, , is analysed. An exact solution of the magneto-elastic problem is found and we present formulas for the deformation, , and the stress distributions, and , valid for any critical-stat…
The crystal structure of a new cubic cristobalite-related sodium aluminosilicate Na 1.45 Al 1.45 Si 0.55 O 4 [ P 2 1 3, a = 14.553 (1) Å] has been modelled using a modulation wave approach and the model tested against X-ray powder diffraction data using the Rietveld method. Owing to there being 64 independent position…
The new compounds K2Au2Ge2S6 (1), K2Au2Sn2Se6 (2), and Cs2Au2SnS4 (3) have been synthesized through direct reaction of the elements with a molten polyalkalithiogermanate(stannate) flux at 650, 550, and 400 °C, respectively. Their crystal structures have been determined by single crystal X-ray diffraction techniques. 1…