André H.G. Gabriel、Christian Chatillon、I. Ansara1988-01-01High temperature science
Etude des systemes Co−C, Ni−C et Co−Ni-C par analyse thermique differentielle, analyse de la teneur en carbone, equilibre heterogene, pression de vapeur. Analyse critique des donnees thermodynamiques disponibles
Intermetallics and Advanced Alloy PropertiesAdvanced materials and compositesMetallurgical and Alloy Processes
Minoru HIRAMATSU、Eiichi Sukedai、Hitoshi Kawasaki 等 4 位作者1988-01-01Journal of The Surface Finishing Society of Japan
The hydrogen embrittlement of 145kgf/mm2-class high strength steel was evaluated, with the concomitant measurement of hydrogen absorbed during pretreatment and zinc plating of the steel using zincate bath with or without suspended silica particles. It was found that almost all of the absorbed hydrogen was located in t…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsNon-Destructive Testing Techniques
S. Nariki、Shigeru Ito、Katsumi Uchinokura 等 4 位作者1988-01-01Journal of the Ceramic Society of Japan
The formation and ionic conductivity of β-, β′′- and β′′′-alumina type ferrites in the systems Rb2O-Fe2O3 and Cs2O-Fe2O3 were studied. Rb+-β-ferrite was formed by heating powder mixtures of Rb2CO3⋅(6-6.5) α-Fe2O3 above 1200°C, while Rb+-β′′-ferrite was synthesized together with the β phase below 1150°C. Rb+-β′′′-ferri…
Magnetic Properties and Synthesis of FerritesMetal Extraction and BioleachingIron oxide chemistry and applications
Swakshar Ray1988-01-01IEE Proceedings C Generation Transmission and Distribution
Many power system circuits contain iron cored coils, which are common nonlinear circuit elements. Systems engineers have to model these elements while studying such phenomena as inrush current, ferroresonance, subharmonics etc. The nonlinearity involved in these elements cannot be appropriately taken into account unle…
Power Systems Fault DetectionMagnetic Properties and ApplicationsMagnetic Field Sensors Techniques
Tsuyoshi Takahashi、Koichi Kurita1988-01-01IEEE Transactions on Magnetics
A method for computing transient eddy currents induced by the movement of magnets without iron materials, such as superconducting magnets, is proposed. The formulation is based on a finite-difference method utilizing only the electric vector potential of the T- Omega method. Meshing is done only for the 2-D thin condu…
Electric Motor Design and AnalysisMagnetic Properties and ApplicationsNon-Destructive Testing Techniques
D.M. Rowe1988-01-01P. Peregrinus on behalf of the Institution of Electrical Engineers eBooks
Thirty-five papers presented at the University of Wales Institute of Science and Technology, Cardiff, UK Sept. 1987 conference discuss recent results and developments in thermoelectric energy conversion under the topics: general properties and behavior, measurement, applications, conversion. Annotat
Advanced Thermoelectric Materials and Devices
K. Miyata、K. Miya1988-01-01IEEE Transactions on Magnetics
The magnetomechanical behavior of ferromagnetic material is analyzed. The behavior is nonlinear because of the strong nonlinear B-H magnetization relation. Finite-element analyses of 2-D and 3-D magnetic field, magnetic torque, and deformation of a beam-plate arrangement and a circular tube are described. Experimental…
Magnetic Properties and ApplicationsNon-Destructive Testing TechniquesGeophysics and Sensor Technology
Ramesh D. Bolch、Ramesh D. Arasasingham、Alan L. Balch 等 4 位作者1988-01-01Heterocycles
Conversion of the octaethyl-11-oxochlarin and octaethyl-7.17-dioXoisobacterioch10rininto their thio and dithio analogs using Lawesson's reagent is reported.Spectroscopic data, along with X-ray crystallographic data for the dithio compound and its dloxo precursor, are reported.Porphyrins and porphyrin derivatives beari…
Porphyrin and Phthalocyanine ChemistryPhotodynamic Therapy Research StudiesPorphyrin Metabolism and Disorders
Yong Sok Lee、Miklós Kertész1988-01-01Journal of the Chemical Society Chemical Communications
MNDO and extended Hückel calculations on the electronic structure of BC3 based on structure (1) and the alternatives (2) and (3) suggest that (1) would be an insulator rather than show metallic conductivity but that structures (2) and (3) could explain its high conductivity.
Boron and Carbon Nanomaterials ResearchSuperconductivity in MgB2 and AlloysInorganic Chemistry and Materials
Kazuko Kobayashi1988-01-01The American Journal of Chinese Medicine
Moxa was soaked in a mixed solvent of chloroform, methanol and water (5:5:1) at room temperature for 7 days, and the supernatant solution was separated into two layers by the addition of water. Heptatriacontane (C37H76), confirmed by measurements of 1H and 13C-NMR spectra and melting point, was obtained from the chlor…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical Applications
L.L. Hatfield、G.R. Leiker、M. Kristiansen 等 6 位作者1988-01-01IEEE Transactions on Electrical Insulation
A treatment which significantly increases the pulsed surface flashover potential of some insulator materials in vacuum is described. The flashover potential is measured by placing a short cylindrical sample between brass electrodes in a vacuum chamber at a pressure of 10/sup -4/ Pa and applying a high-voltage (HV) dou…
High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationElectrostatic Discharge in Electronics
R. H. Titran、Joseph R. Stephens、D. W. Petrasek1988-01-01University of North Texas Digital Library (University of North Texas)
Space power requirements for future NASA and other United States missions will range from a few kilowatts to megawatts of electricity. Maximum efficiency is a key goal of any power system in order to minimize weight and size so that the space shuttle may be used a minimum number of times to put the power supply into o…
Nuclear Materials and PropertiesGraphite, nuclear technology, radiation studiesNuclear and radioactivity studies
E. B. Shone、R. E. Malpas、P.K. Gallagher1988-01-01Institute of Marine Engineers Transactions
The various attributes of copper alloys and stainless steels for use in sea water handling systems have been compared. As an outcome of this, a 4-year test program was undertaken to establish the corrosion characteristics of various stainless steel alloys in their cast and wrought forms. To facilitate this work, a ful…
Corrosion Behavior and Inhibition
N. Boden、Richard J. Bushby、Malini V. Jesudason 等 4 位作者1988-01-01Journal of the Chemical Society Chemical Communications
In the anhydrous crystal the discoid amphiphile TP6E02M (1) packs in tilted columns whereas in the more hydrated liquid crystal phases these columns are vertical.
Molecular Sensors and Ion DetectionPorphyrin and Phthalocyanine ChemistryMolecular spectroscopy and chirality
John Nicholson1988-01-01Journal de physique
The interface of a nematic 7CB - solid substrate has been studied by optical ellipsometry. The phase difference between 0 and E rays, Δ = δ p - δs, and the angle ψ = tan-1 | r p/rs | are measured as a function of incidence angle and temperature. To fit the experimental data, an exponential interfacial region having a…
Liquid Crystal Research AdvancementsMaterial Dynamics and PropertiesSurfactants and Colloidal Systems
J. Van Humbeeck、Etienne Aernoudt、L. Delaey 等 6 位作者1988-01-01Revue de Physique Appliquée
After suitable thermomechanical treatment a series of Cu-based and Ni-Ti-alloys can show a reversible shape change during heating and/or cooling over a temperature region of about 40 degrees. Two important conditions for this effect are that a thermoelastic martensitic transformation occurs in this temperature range a…
Shape Memory Alloy Transformations
A. Needleman1988-01-01Revue de Physique Appliquée
Résumé.- Le formalisme de la mécanique des milieux continus est discuté pour l’analyse des insta-bilités par striction et par bandes. L’apparition de l’instabilité que l’on prédit dépend forte-ment des caractéristiques des matériaux, pas seulement à travers les propriétés comme le durcisse-ment par écrouissage ou la s…
Microstructure and mechanical propertiesMetal Forming Simulation TechniquesHigh-Velocity Impact and Material Behavior
J. Krüger1988-01-01International Materials Reviews
The passivity of metals is reviewed from the perspective of materials science rather than with the usual electrochemical emphasis. Iron and ferrous alloys are used to illustrate the essentials of the phenomenon of passivity. A discussion of the general and engineering aspects is first given followed by a detailed desc…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
Kenjiro Tadera、Tetsuya Kaneko、Fumio Yagi1988-01-01Journal of Nutritional Science and Vitaminology
Three new pyridoxine-glycosides were isolated from rice bran (10 kg) as colorless powder by various chromatographic techniques: compound A, 53 mg; compound B, 7.8 mg; compound C, 5.8 mg. Compound A was shown to consist of pyridoxine and glucose in a 1:2 molar ratio by beta-glucosidase hydrolysis, and by 1H-NMR and sec…
Enzyme Structure and FunctionEnzyme Production and CharacterizationPhytase and its Applications
Isao ODA、M. Matsui、Takao Sōma 等 5 位作者1988-01-01Journal of the Ceramic Society of Japan
Combined tension/torsion and compression/torsion tests for sintered silicon nitride specimens were carried out at room temperature to investigate the fracture behavior of ceramics under multiaxial stress states. Tension, torsion and 4-point bending tests have been also carried out in order to estimate Weibull's two pa…
Advanced ceramic materials synthesisMechanical Behavior of CompositesHigh-Velocity Impact and Material Behavior