Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Si3N4/SiC nanocomposite powders were obtained from a preceramic polymeric network based on poly(methylsilane) as the in situ quasi-stoichiometric SiC source. These powders were constituted of nanosized SiC particles homogeneously distributed in the Si3N4 particulate matrix. beta-SiC whiskers were grown at 1400 °C in t…
Graft polymerization of N-vinyl-2-pyrrolidone with chitin was studied using hydrogen peroxide for initiation. The capacity of the obtained VP-g-Ch graft copolymer for adsorption of nickel was examined. The effect of temperature, pH and solute concentration on the chelating properties of the grafted and ungrafted chiti…
Disks of a commercial alumina were fabricated by slip casting, calcination and sintering. The surfaces were machined using SiC papers (120 and 320 grit) and characterized by residual stresses measurements. The mechanical strength was determined in biaxial flexure (ball on discontinuous ring). The specimens were subjec…
Dilatometric techniques were used to build the continuous cooling transformation (CCT) diagram for a medium carbon microalloyed steel; the microstructure and hardness were determined at different cooling rates. The mechanical behavior of the steel in the austenite field and at temperatures approaching austenite to fer…
Bioactive Ti–6Al–4V alloy, which spontaneously forms a bonelike apatite layer on its surface in the body and bonds to living bone through this apatite layer, can be prepared by producing an amorphous sodium titanate on its surface by NaOH and heat treatments. In this study, the process of apatite formation on the bioa…
An effective positive charge carrier mobility of 4.4 x 10 -9 cm²/V.s was directly determined using analytical expressions for space-charge-limited current in poly(1,10-decanedioxy-2-methoxy-1,4-phenylene-1,2-ethenylene-3,6-dimethoxy- 1,4-phenylene-1,2-ethenylene-3-methoxy-1,4-phenylene), OPPVDBC, which is a soluble el…
Thin solid films of CeO2-SnO2 (17 mol% Sn) and CeO2-SnO2:X (X = Li, C and Si) were prepared by the sol-gel route, using an aqueous-based process. The addition of Li, C and Si to the precursor solution leads to films with different electrochemical performances. The films were deposited by the dip-coating technique on I…
Considering recent modifications on n-type highly doped silicon parameters, an emitter optimization was made based on one-dimensional models with analytical solutions. In order to get good accuracy, a fifth order approximation has been considered. Two kinds of emitters, homogeneous and non-homogeneous, with phosphorus…
Poly(L-lactic acid) (PLLA) and poly(ethylene oxide) (PEO) blends were prepared by mechanical mixture and fusion of homopolymers. Samples were submitted to in vitro degradation tests (immersion in a phosphate buffer solution with pH = 7.4 at 37 °C). Independently of the blend composition, PEO was dissolved after 14 day…
The crystallization processes for the amorphous metallic alloys Fe74B17Si2Ni4Mo3 and Fe86B6Zr7Cu1 (at. %) were investigated using X-rays diffraction measurements performed in-situ during Joule-heating, with simultaneous monitoring of the electrical resistance. We determined the main structural transitions and crystall…
Melt undercooling opens new solidification pathways for non-equilibrium phases and non-conventional microstructures. Several techniques, including the fluxing technique, have been developed in order to reduce nucleation sites and to produce high undercoolings for metals and alloys. In this work the fluxing technique w…
Several techniques can be used to improve surface properties. These can involve changes on the surface chemical composition (such as alloying and surface welding processes) or on the surface microstructure, such as hardening and melting. In the present work surface melting with a 3kW CO2 cw laser was done to alter sur…
The sintering of hardmetal in the solid state is studied. The influence of the WC particle size on the sintering kinetics, the role of the binder phase in the densification process and how sintering depends on the heating conditions are investigated. It is observed that alloys with different WC particle size show quit…
Ideal biocompatible polymers must show a mimetic superstructure with biological supra-organization. Collagen-rich structures like tendons and ligaments are materials with various levels of order, from molecules to bundles of fibers, which affect their biomechanical properties and cellular interactions. Poly-benzyl-L-g…
This paper discusses the electrochemical behavior of copper, nickel and a copper/nickel alloy in aerated aqueous 0.10 and 1.0 mol L-1 sodium acetate. The data obtained from different electrochemical techniques were analyzed to determine the influence of Ni and Cu on the electrochemical processes of the alloy electrode…
Titanium oxide (TiO2) thin films were obtained using the MOCVD method. In this report we discuss the properties of a film, produced using a ordinary deposition apparatus, as a function of the deposition time, with constant deposition temperature (90 °C), oxygen flow (7,0 L/min) and substrate temperature (400 °C). The…
Plastic deformation behaviour in Ti–54.7 at.%Al and Ti–58.0 at.%Al single crystals was examined around and above the anomalous strengthening peak temperature (Tp) focusing on the effect of Al5Ti3 superstructure. The Al5Ti3 superstructure developed in the L10 matrix of Ti–58.0 at.%Al, and the size of the Al5Ti3 phase o…
This article discusses the development of a test bench and a methodology for the study of composite resin abrasive wear. To evaluate the operation of the test bench and to compare the proposed methodology with other existing ones, a study was made of the five composites most commonly used by dentists. The one-way ANOV…