Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 130464 / 130843 页 · 当前展示 2,609,261–2,609,280 / 2,616,853 条匹配结果 · 摘要仅作预览

Temperature Control of Fueled Irradiation Capsules by Variable Conductance

W. W. Godsin1960-10-01Nuclear Science and Engineering

An irradiation capsule for high-temperature fuel irradiations has been developed to permit constant temperature control over a range of about ±35% of design power. Control is achieved by the variation in thermal conductivity of a binary gas mixture in a control annulus located between the test specimen and the capsule…

Fusion materials and technologiesNuclear reactor physics and engineeringNuclear Materials and Properties

Some Physical Properties of Chemically Finished Viscose Rayon Filament Yarns and Fabrics

D. H. Morton、Chris Beaumont1960-10-01Journal of the Society of Dyers and Colourists

The physical properties of viscose rayon filament yarns have been studied before and after treatment with a wide range of resin and formaldehyde finishes applied by normal, as well as unconventional, methods. A general relationship has been observed between the tensile elastic recovery, extensibility, wet initial modu…

Mechanical Behavior of CompositesDyeing and Modifying Textile FibersTextile materials and evaluations

Long-chain Phosphates. I. Reactions of Solid Potassium Kurrol Salt with Solutions of Various Metal Salts

Shigeru Ohashi、K. Yamagishi1960-10-01Bulletin of the Chemical Society of Japan

Abstract Pure crystalline potassium Kurrol salt was prepared and its X-ray pattern was compared with that obtained by Klement et al. The solubility of the potassium Kurrol salt in water was 0.007∼0.009 per cent at room temperature. Qualitative observation was made for the reactions of the potassium Kurrol salt with va…

Material Properties and ApplicationsEnvironmental and Industrial SafetyScientific Research and Studies

Loss in Pipeline Carrying Capacity Due to Corrosion and Tuberculation

Thurston E. Larson1960-10-01American Water Works Association

This article discusses the classification of calcium carbonate stability as an adjunct to natural or artificial protective coatings on metals. This is due to the fact that the quantity of an available protective ingredient is limited for any water and may not be sufficient to neutralize or react with the quantity of p…

Corrosion Behavior and InhibitionConcrete Corrosion and DurabilityMaterial Properties and Failure Mechanisms

Anisotropy of the Magnetic Susceptibility of Gallium

Titus Pankey1960-10-01Journal of Applied Physics

The bulk magnetic susceptibilities of single gallium crystals and polycrystalline gallium spheres were measured at 25°C. The following anisotropic diamagnetic susceptibilities were found: a axis (−0.119±0.001)×10−6 emu/g, b axis (−0.416±0.002)×10−6 emu/g, and c axis (−0.229±0.001) emu/g. The susceptibility of the poly…

Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin FilmsGeomagnetism and Paleomagnetism Studies

On the mechanism of polymerization retardation by hydroquinone

Robert G. Caldwell、Judson L. Ihrig1960-10-01Journal of Polymer Science

Abstract The retardation of methyl methacrylate polymerization by hydroquinone, 1,4‐napthalenediol, and benzoquinone was studied by an accurate dilatometric method. The degree of retardation was found to be very small for the phenols in the absence of air and very sensitive to the presence of impurities. Kinetic analy…

Polymer crystallization and propertiesPolymer composites and self-healingPhotopolymerization techniques and applications

Polyethers. X. Endgroups in polyethylene oxide

Philip E. Ebert、Charles C. Price1960-10-01Journal of Polymer Science

Abstract High concentrations (10% or greater)of zinc chloride or mixtures of aluminum isopropoxide–zinc chloride catalyzed the polymerization of ethylene oxide to low molecular weight polymer. Endgroup analysis of the polymer gave a 1:1 ratio of hydroxyl to chloride when zinc chloride was the catalyst. Using the alumi…

Organometallic Complex Synthesis and CatalysisAdvanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and properties

The Saturation Magnetostriction Constants of Nickel within the Temperature Range - 196 to 365 C

R R Birss、E W Lee1960-10-01Proceedings of the Physical Society

The spontaneous magnetostriction of cubic crystals can be expressed in the form λ = C 0 + C 1 (α 1 2 β 1 2 + α 2 2 β 2 2 + α 3 2 β 3 2 ) + C 2 (α 1 α 2 β 1 β 2 + α 2 α 3 β 2 β 3 + α 3 α 1 β 3 β 1 ) where the α 1 and β 1 are, respectively, the direction cosines of the magnetization vector and the measuring direction, w…

Magnetic properties of thin filmsMagnetic Properties and ApplicationsMagnetic Properties of Alloys

Inhibitors of the corrosion of iron. II. Efficiency of the sodium, calcium and lead salts of long chain fatty acids

J. E. O. Mayne、E. H. Ramshaw1960-10-01Journal of Applied Chemistry

Abstract The inhibitive properties of the sodium, calcium and lead salts of caproic, oenanthic, caprylic, pelargonic, capric, suberic, azelaic and sebacic acids have been examined in the pH range 4·0–6·0 at concentrations 10 −5 to 10 −2 N. The inhibitive efficiency increased with the length of the carbon chain up to a…

Corrosion Behavior and Inhibition

Effects of Illumination Upon Sodium Chloride Thermoluminescence

A. E. Stoddard1960-10-01Physical Review

Illumination of a sodium chloride crystal at liquid nitrogen temperature after x-ray irradiation at a higher temperature or higher temperature annealing has two effects upon its thermoluminescence: Glow peaks stable at the temperature of x-ray irradiation or annealing are diminished in intensity. Missing glow peaks, u…

Luminescence Properties of Advanced MaterialsAdvanced Chemical Sensor TechnologiesOptical and Acousto-Optic Technologies

THE VOLUME CHANGE ON MIXING IN LIQUID METALLIC SOLUTIONS. I. ALLOYS OF CADMIUM WITH INDIUM, TIN, THALLIUM, LEAD AND BISMUTH

O. J. Kleppa1960-10-01The Journal of Physical Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTTHE VOLUME CHANGE ON MIXING IN LIQUID METALLIC SOLUTIONS. I. ALLOYS OF CADMIUM WITH INDIUM, TIN, THALLIUM, LEAD AND BISMUTHO. J. KleppaCite this: J. Phys. Chem. 1960, 64, 10, 1542–1546Publication Date (Print):October 1, 1960Publication History Published online1 May 2002Publi…

Material Properties and ApplicationsThermodynamic and Structural Properties of Metals and AlloysMetallurgical and Alloy Processes

Vibrational Spectrum of Crystalline Potassium Hydroxide

Robert G. Snyder、Junji Kumamoto、James A. Ibers1960-10-01The Journal of Chemical Physics

The infrared spectrum of KOH has been obtained in the region 4000–300 cm—1. At 23°C the spectrum shows two broad bands, one at 3600 cm—1 and the other at 643 cm—1. At —180°C the O–H stretching band near 3600 cm—1 appears as a doublet. Splitting is shown to arise from coupling between the two OH— ions in the unit cell.…

Spectroscopy and Quantum Chemical StudiesSolid-state spectroscopy and crystallographyMolecular Spectroscopy and Structure

Purifying Hydrogen by Selective Oxidation of Carbon Monoxide

Marion L. Brown、Albert Green、Günther Cohn 等 4 位作者1960-10-01Industrial & Engineering Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTPurifying Hydrogen by Selective Oxidation of Carbon MonoxideMarion Brown, Albert Green, Gunther Cohn, and Holger AndersenCite this: Ind. Eng. Chem. 1960, 52, 10, 841–844Publication Date (Print):October 1, 1960Publication History Published online1 May 2002Published inissue 1…

Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCatalysis and Oxidation Reactions

Zur Kenntnis von Di‐cyclopentadienyl‐titan(III)‐Verbindungen, I. Das Di‐cyclopentadienyl‐titan(III)‐boranat, (C5H5)2TiBH4

Heinrich Nöth、Robert Hartwimmer1960-10-01Chemische Berichte

Abstract Di‐cyclopentadienyl‐titan(IV)‐dichlorid reagiert mit Lithiumboranat in Äther unter Bildung von Di‐cyclopentadienyl‐titan(III)‐boranat, (C 5 H 5 ) 2 TiBH 4 . Die chemischen und physikalischen Eigenschaften der Verbindung sprechen dafür, daß die Boranatgruppe BH an das Titanatom über eine doppelte Wasserstoff‐a…

Hydrogen Storage and MaterialsChemical Synthesis and CharacterizationChemical Reactions and Isotopes

METAL—POLYELECTROLYTE COMPLEXES. VIII. THE POLY-N-VINYLIMIDAZOLE—COPPER(II) COMPLEX

Daniel H. Gold、Harry P. Gregor1960-10-01The Journal of Physical Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTMETAL—POLYELECTROLYTE COMPLEXES. VIII. THE POLY-N-VINYLIMIDAZOLE—COPPER(II) COMPLEXDaniel H. Gold and Harry P. GregorCite this: J. Phys. Chem. 1960, 64, 10, 1464–1467Publication Date (Print):October 1, 1960Publication History Published online1 May 2002Published inissue 1 Oct…

Inorganic and Organometallic ChemistrySynthesis and properties of polymersSilicone and Siloxane Chemistry

Some observations on the stress-corrosion cracking of α-brass and similar alloys

C. Edeleanu、Adrian Forty1960-10-01Philosophical magazine

An attempt has been made to establish a mechanism for stress corrosion by direct observation on the propagation of cracks in α-brass tested under ammonia. The observations indicate that failure might be described by a two-stage process, of local embrittlement, followed by a cleavage-like fracture. Such a model demands…

Aluminum Alloy Microstructure PropertiesBauxite Residue and UtilizationMetallurgy and Material Science

Argon diffusion in glauconite, microcline, sanidine, leucite and phlogopite

Jack F. Evernden、Garniss H. Curtis、Ronald W. Kistler 等 4 位作者1960-10-01American Journal of Science

Data on the diffusion of Ar in sanidine, microcline, phlogopite, glauconite, and leucite are presented. We conclude from these data that: 1) Dynamic lattice changes markedly influence Ar loss at the time of the changes. 2) If Ar diffusion takes place under conditions of no lattice changes, all Ar will be lost at a sin…

Soil and Unsaturated FlowClay minerals and soil interactionsGeochemistry and Geologic Mapping

28—THE SORPTION OF WATER BY CELLULOSE AND EIGHT OTHER TEXTILE POLYMERS: PART II—THE SORPTION OF WATER VAPOUR BELOW 100°C BY TEXTILE POLYMERS OTHER THAN CELLULOSE

R. Jeffries1960-10-01Journal of the Textile Institute Transactions

Detailed results are presented on the absorption and desorption of water vapour (0—100% r.h., 30°—90°C) by cellulose triacetate, secondary cellulose acetate, ethyl cellulose, drawn nylon 6.6 yarn, Terylene, Orlon, wool and Fibrolane. The sorption characteristics of the samples were stabilized prior to the sorption mea…

Advanced Cellulose Research StudiesTextile materials and evaluationsAerogels and thermal insulation

THE ROLE OF STRESS IN HYDROGEN INDUCED DELAYED FAILURE

E. A. Steigerwald、F.W. Schaller、A.R. Troiano1960-10-01Trans. Met. Soc. AIME

The initiation of localized cracking in hydrogenated highstrength steel was dependent on the development of a critical hydrogen concentration and relatively insensitive to the magnitade of the applied stress. The stress was believed to influence the delayed failure process by providing the means for grouping the hydro…

Microstructure and Mechanical Properties of SteelsNon-Destructive Testing TechniquesMaterial Properties and Failure Mechanisms

On the Magnetic Properties of the Compound Mn2As

Motoyoshi Yuzuri、Motohiko Yamada1960-10-01Journal of the Physical Society of Japan

The thermomagnetic properties of a compound Mn 2 As were investigated together with the phase diagram of Mn–As system. From the results of measurements of the temperature dependence of magnetic susceptibility and specific heat of the compound Mn 2 As, it was found that this alloy is antiferromagnetic with the Néel poi…

Magnetic properties of thin filmsMagnetic and transport properties of perovskites and related materialsMagnetic Properties of Alloys