Hani E. Naguib、B.K. MacLaurin1979-06-01IEEE Transactions on Components Hybrids and Manufacturing Technology
The relative performance characteristics of thick-film Pd/Ag conductors (0-34% Pd) for dielectric crossover structures in hybrid microelectronic circuits are described. The materials were supplied from Du Pont and Engelhard. The experiments involved waterdrop (WD) tests and temperature-humidity-bias (THB) tests at 90°…
Ferroelectric and Piezoelectric MaterialsSemiconductor materials and devicesCopper Interconnects and Reliability
ANTONIO ESCALA、Richard S. Stein1979-06-01Advances in chemistry series
The compatibility of blends of polybutylene terephthalate and polyethylene terephthalate has been studied. A single glass transition for the blend is observed which varies with composition, suggesting that the components are compatible in the amorphous phase. Studies of the effects of time and temperature in the melt…
Polymer crystallization and propertiesbiodegradable polymer synthesis and propertiesMicroplastics and Plastic Pollution
Abdul Matin、C. Veldhuis、V. STEGEMAN 等 4 位作者1979-06-01Journal of General Microbiology
A freshwater Spirillum sp., which apparently belongs to a niche of low nutritional status (Matin & Veldkamp, 1978), accumulated poly-beta-hydroxybutyric acid (PHB) during lactate-limited growth in continuous culture. The PHB content varied in a complex manner with the dilution rate (D), but was greatest at the lowest…
Algal biology and biofuel productionbiodegradable polymer synthesis and propertiesBiochemical Acid Research Studies
Hideo Tsutsui、Yohsuke Kinouchi、Hideki Sasaki 等 5 位作者1979-06-01Journal of Dental Research
The Sm-Co magnet has superior and convenient magnetic properties as compared with conventional ones used hitherto in prosthesis, and even very small pieces can provide the force necessary in dentistry. Also, the magnet has high corrosion resistance and is innocuous to tissues. Therefore, it can be used as a dental mat…
Magnetic Properties of AlloysNuclear Physics and ApplicationsMetallurgy and Cultural Artifacts
Edmund A. Flexman1979-06-01Polymer Engineering and Science
Abstract The ductile‐brittle transitions of nylon‐66 compositions were studied by Izod and falling weight tests. Samples included unmodified and impact modified compositions. Brittle breaks did not occur in the toughest resin with changes in rate of loading, notch radius, thickness, or distance and orientation to the…
Mechanical Behavior of CompositesPolymer crystallization and propertiesPolymer Nanocomposites and Properties
Henri B. Kagan、Hubert Mimoun、Christoph Mark 等 4 位作者1979-06-01Angewandte Chemie International Edition in English
Asymmetric syntheses of non-functionalized oxiranes can be accomplished with the aid of the new optically active MoVI peroxo complex (1). Thus e. g., propene, 1-butene, and 3-methyl-1-butene were epoxidized to the corresponding R-oxirane in ca. 29, 31, and 16% optical yield (enantiomeric excess). Previously, only acti…
Polyoxometalates: Synthesis and ApplicationsMetal-Catalyzed Oxygenation MechanismsOxidative Organic Chemistry Reactions
Y. A. Chang、Daniel Goldberg、J. Neumann1979-06-01Medical Entomology and Zoology
Phase diagram and thermodynamic data for twenty ternary copper‐silver‐X alloy systems—where X represents Al,Au,Cd,Fe,Ge,In,Mg,Mn,Ni,P,Pb,Pd,Re,S,Sb,Se,Sn,Te,Ti or Zn—were compiled and critically evaluated. Of the twenty ternary systems, thermodynamic data are available for only the seven systems containing Au,Pb,Pd,S,…
Intermetallics and Advanced Alloy PropertiesThermodynamic and Structural Properties of Metals and AlloysMetallurgical and Alloy Processes
Tien-Lai Hwang、S. E. Schwarz、D.B. Rutledge1979-06-01Applied Physics Letters
We describe a novel room-temperature detector for the wavelength range 10–1000 μm. This detector consists of a thin bismuth bolometer film with dimensions much smaller than a wavelength. The small size of the detector results in reduced NEP and faster response. A video NEP of 1.6×10−10 W/Hz1/2 is obtained at 119 μm, r…
Photonic and Optical DevicesGas Sensing Nanomaterials and SensorsTransition Metal Oxide Nanomaterials
Takashi Sasaki、Takeshi Tanaka、Noriko Nanbu 等 5 位作者1979-06-01Biotechnology and Bioengineering
Abstract Chemical and physical treatments of cotton cellulose have been studied in order to elucidate the relationship between the degree of crystallinity of cellulose and the susceptibility of cellulose to cellulase. Cotton cellulose powder was treated with the following solvents: 60% H 2 SO 4 , Cadoxen, and DMSO‐ p…
Biofuel production and bioconversionAdvanced Cellulose Research StudiesEnzyme Production and Characterization
B. MacDougall1979-06-01Journal of The Electrochemical Society
The effect of chloride ion on the passivation of nickel is studied and a mechanism for pit initiation on electrodes anodized in Cl − ‐containing solutions is proposed. Although Cl − does not directly influence the nickel dissolution reaction, , it does interfere with formation and thereby retards passivation. This is…
Corrosion Behavior and InhibitionConcrete Corrosion and DurabilityAnodic Oxide Films and Nanostructures
В. П. Шибаев、N.A. Platé、Ya.S. Freidzon1979-06-01Journal of Polymer Science Polymer Chemistry Edition
Abstract An approach to the creation of thermotropic cholesterol‐containing liquid crystalline polymers by the chemical binding of cholesterol molecules with side chains of comblike polymers is presented. This type of structure permits a decrease in the steric hindrances provided by the backbone chains for the purpose…
Liquid Crystal Research AdvancementsSurfactants and Colloidal SystemsMolecular spectroscopy and chirality
James R. Hein、Hsueh‐Wen Yeh、Elaine Alexander1979-06-01Clays and Clay Minerals
Abstract Clay minerals in the upper 50 cm of sediment that surround the Cu- and Ni-rich manganese nodules in the North Equatorial Pacific form two fractions: terrigenous (mostly eolian) illite, chlorite, and kaolinite, and authigenic smectite. Smectite increases with depth in box cores from 26 to 39% and from 53 to 66…
Geological and Geochemical AnalysisCrystal Structures and PropertiesClay minerals and soil interactions
Chi K. Chang、M. S. KUO1979-06-01Journal of the American Chemical Society
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTReaction of iron(III) porphyrins and iodosoxylene. The active oxene complex of cytochrome P-450C. K. Chang and Ming-Shang KuoCite this: J. Am. Chem. Soc. 1979, 101, 12, 3413–3415Publication Date (Print):June 1, 1979Publication History Published online1 May 2002Published inis…
Photosynthetic Processes and MechanismsPorphyrin and Phthalocyanine ChemistryMetal-Catalyzed Oxygenation Mechanisms
C. S. Hsu、Aneesur Rahman1979-06-01The Journal of Chemical Physics
Molecular dynamics technique is used to study the homogeneous nucleation of an ordered stable phase from a liquidlike state of aggregation. The rubidium potential is used for a 500 particles system with reduced density 0.95. At the start of the calculation the system is quenched rapidly from a reduced temperature of 0…
Material Dynamics and PropertiesTheoretical and Computational Physicsnanoparticles nucleation surface interactions
A. J. Pennings、A. Zwijnenburg1979-06-01Journal of Polymer Science Polymer Physics Edition
Abstract The melting behavior of continuous fibrillar crystals of high‐molecular‐weight polyethylene has been investigated. The macrofibers were grown from dilute solutions in xylene subjected to Couette flow in the temperature range between 103 and 118.5°C. The thermograms, as determined by differential scanning calo…
Polymer crystallization and propertiesbiodegradable polymer synthesis and propertiesMicroplastics and Plastic Pollution
R. N. Castellano、L.G. Feinstein1979-06-01Journal of Applied Physics
Lead zirconate titanate is a solid solution with nominal composition Pb(ZrxTi1−x)O3. Ferroelectric thin films of this material have been successfully deposited by a focused ion-beam sputtering technique in an O2 atmosphere. These films were characterized according to composition, crystal structure, and dielectric and…
Bone Tissue Engineering MaterialsFerroelectric and Piezoelectric MaterialsElectronic and Structural Properties of Oxides
Birgitte E. R. Schilling、Roald Hoffmann1979-06-01Journal of the American Chemical Society
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTM3L9(ligand) complexesBirgitte E. R. Schilling and Roald HoffmannCite this: J. Am. Chem. Soc. 1979, 101, 13, 3456–3467Publication Date (Print):June 1, 1979Publication History Published online1 May 2002Published inissue 1 June 1979https://pubs.acs.org/doi/10.1021/ja00507a006h…
Metal complexes synthesis and propertiesRadioactive element chemistry and processingLanthanide and Transition Metal Complexes
Bruce F. Blumentritt1979-06-01Journal of Applied Polymer Science
Anisotropy in mechanical properties, expansion coefficients, and long-term shrinkage of PET films was determined. The films ranged in thickness from 0.92 to 14 mils. Young's modulus, ultimate strength, ultimate elongation, and coefficient of thermal expansion were strongly anisotropic. This anisotropy was related to o…
Mechanical Behavior of CompositesPolymer crystallization and propertiesEpoxy Resin Curing Processes
D. Royer、E. Dieulesaint1979-06-01Journal of Applied Physics
The elastic and piezoelectric constants of trigonal crystals of selenium and tellurium have been determined. Their values were deduced from measurements of ultrasonic phase velocities at room temperature. The stiffnesses cEαβ in units of 1010 N/m2 and the piezoelectric constants eiα in C/m2 for selenium are found to b…
Thermography and Photoacoustic TechniquesSolid-state spectroscopy and crystallographyOptical and Acousto-Optic Technologies
Paul B. Moore、J. Ito1979-06-01Mineralogical Magazine
Synopsis A nomenclature is proposed for the alluaudite and wyllieite complex series which is based on sequentially distributing the cations in the cell according to increasing polyhedral size, matching that size with increasing ionic radii of the cations. For oxidized members, the largest site may be partly occupied t…
Crystal Structures and PropertiesClay minerals and soil interactionsChemical Synthesis and Characterization