Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Hydrodynamic models are generally applied to describe the dynamic wetting of newtonian or non-newtonian fluids on a solid surface. Conversely, the molecular-kinetic paradigm is only utilized for spreading newtonian fluids while considering the movement of a contact line as a molecular hopping process. This study exten…
Zirconium oxide cluster anions Zr(x)O(y)(-) are prepared by laser ablation and are reacted with n-butane in a fast flow reactor under near room temperature conditions. A time-of-flight mass spectrometer is used to detect the cluster distribution before and after the reactions. Observation of a hydrogen atom pickup pro…
Abstract A series of segmented poly(urethane‐urea) polymers have been synthesized varying the hard segments content, based on the combination of polycaprolactone diol and aliphatic diisocyanate (Bis(4‐isocyanatocyclohexyl)methane), using diamine (1,4‐Butylenediamine) as the chain extender. The microstructure and prope…
Abstract Gelatin was extracted from chrome tanned leather waste with the aim to produce a durable coating or film. Crosslinking has shown to improve the physical performance of a film/coating. The effect of the method of crosslinking and the use of different crosslinking agents were studied. The extracted gelatin was…
Sensing technologies based on metallic nanoparticles, known as Ag, Au, and so on, have raised enormous interest for their extraordinary sensing resolution and sensitivity to analytes of chemical or biological importance under optical detection have received wide attention in recent decades. Currently, a discrete nanop…
DegS is a periplasmic Escherichia coli protease, which functions as a trimer to catalyze the initial rate-limiting step in a proteolytic cascade that ultimately activates transcription of stress response genes in the cytoplasm. Each DegS subunit consists of a protease domain and a PDZ domain. During protein folding st…
Abstract Melt blowing involves applying a jet of hot air to an extruding polymer melt and drawing the polymer stream into microfibers. This study deals with the dynamic modeling of the instabilities and related processes during melt blowing. A bead‐viscoelastic element model for fiber formation simulation in the melt…
We present a dissipative particle dynamics simulation study on nanostructure formation of symmetric and asymmetric diblock copolymers confined between planar surfaces. We consider symmetric and slightly asymmetric diblock copolymers that form lamellar nanostructures in the bulk, and highly asymmetric diblock copolymer…
Ce 3+ and Mn 2+ singly doped and codoped SrAl 2 O 4 phosphors were prepared by the solid‐state reaction. Ce 3+ ‐ and Mn 2+ ‐codoped SrAl 2 O 4 phosphor shows tunable blue to green emission. Apart from the emission band of Ce 3+ at 374 nm, which ascribes to the site of Sr 2+ occupied by Ce 3+ , the emission of Mn 2+ lo…
Abstract The corrosion inhibition of mild steel in sulphuric acid solution in the presence of polyethylene glycol (PEG), polyvinyl pyrrolidone (PVP), and their blends was investigated using weight loss and hydrogen evolution techniques at temperature range of 30–60°C. It was found that inhibition efficiency (η%) incre…
The synthesis of a polylysine dendron containing eight GdDOTA units conjugated to a peptoid dimer known to have a high affinity for the vascular endothelial growth factor receptor 2 (VEGFR2) is described. This simple low molecular weight system with a molecular r(1) relaxivity of ∼48 mM(-1) s(-1) is shown to enhance M…
The rheological behavior of two hyperbranched polymer/silica suspensions with different dispersion states, surface chemistries, and concentrations of the silica nanoparticles was investigated in terms of viscoelastic properties, activation energy for viscous flow, and yield stress. The viscoelastic properties of both…
Novel SiOC nanocomposites were successfully synthesized from commercial silica sol and sucrose via a simply designed route. The formation of SiOC nanocomposites was studied using thermogravimetry and differential scanning calorimetry. The synthesized nanocomposites were characterized by Fourier transform infrared spec…
The use of a solvothermal process for the synthesis of tantalum carbide (TaC) and lanthanum hexaboride (LaB 6 ) powders in fused‐quartz test tubes is reported in order to demonstrate the synthesis of these powders using thermal and chemical ignition techniques and to prove that the process is of a self‐propagating hig…
Abstract In this study the effects of citric acid concentration, used as organic emulsifier, on the perovskite phase formation of the nano strontium manganite or cobaltite samples were studied. Stoichiometric perovskites in the absence and presence of citric acid were prepared by drying a solution containing molar rat…
The removal of toxic anions has been achieved using hydrotalcite via two methods: (1) coprecipitation and (2) thermal activation. Hydrotalcite formed via the coprecipitation method, using solutions containing arsenate and vanadate up to pH 10, are able to remove more than 95% of the toxic anions (0.2 M) from solution.…
Abstract Crystallization of amorphous poly(lactic acid) (PLA) was investigated in various organic solvents, such as acetone, ethylacetate, diethylether, tetrahydrofurane, methanol, hexane, toluene, xylene, and o ‐dichlorobenene. Most of the solvents, except hexane, induced crystallization of amorphous PLA. Acetone was…
The presence of deformation twinning in magnesium introduces significant challenges for predicting the bulk response of the material. In this work, we present results showing the presence of tensile twins formed within pre-existing tensile twins in samples deformed in compression at 77 K. Such double twins mirror the…
Advanced technological uses of single-walled carbon nanotubes (SWCNTs) rely on the production of single length and chirality populations that are currently only available through liquid-phase post processing. The foundation of all of these processing steps is the attainment of individualized nanotube dispersions in so…
McMurry coupling of a pyrrole bisacrylaldehyde afforded a dipyrrolic macrocycle that is structurally midway between 1,10-diaza[18]annulene and the porphyrins. The diprotonated dication of this system retains porphyrin-like properties and provides insights into the nature of porphyrinoid aromaticity.