Lawrence E. Nielsen1967-07-01Rubber Chemistry and Technology
Abstract By the use of simple models of filled plastics, approximate equations are derived for elongation to break in the case of perfect adhesion between the phases and for the tensile strength in the case of no adhesion between the polymer and filler phases. By combining these equations with equations for the modulu…
Mechanical Behavior of CompositesPolymer crystallization and propertiesPolymer Nanocomposites and Properties
Toshio Sudô、Susumu Shimoda、Shigeru Nishigaki 等 4 位作者1967-07-01Clay Minerals
Abstract Using the adiabatic calorimeter which has been developed by Nagasaki & Takagi (1948) and manufactured by the Rigaku Denki Company, the energy changes associated with the dehydration and dehydroxylation processes of clay minerals were measured at room pressure. The samples studied were mont-morillonite, ch…
Clay minerals and soil interactionsThermal and Kinetic AnalysisChemical Synthesis and Characterization
Gregory P. Tierney、William D. Conner1967-07-01American Industrial Hygiene Association Journal
The effect of relative humidity on the tare weight of glass-fiber filters was insignificant, but the effect on collected particulates was significant when the humidity exceeded 55%. When particulate samples were weighed at relative humidities below 55%, weight variations did not exceed 1%.
Textile materials and evaluationsAerosol Filtration and Electrostatic Precipitation
F. Marumo1967-07-01Zeitschrift für Kristallographie
The crystal structure of a new copper zine arsenosulfosalt, Cu 6 Zn 3 As 4 S 12 has been determined. Tho crystal is rhombohedral, having tho unit-cell dimensions a rh = 8.34 Å, α rh = 107°20′, a hex = 13.44 Å, c hex = 9.17 Å, and the symmetry C 3 4 – R 3. The structure was solved by interpretation of a three-dimension…
Chalcogenide Semiconductor Thin FilmsCrystal Structures and PropertiesMineralogy and Gemology Studies
Akira Terada、Kenichi Murata1967-07-01Bulletin of the Chemical Society of Japan
Abstract 1-Phthalimido-1,3-butadiene (I) and 2-phthalimido-1,3-butadiene (II) were chosen for study as typical imidobutadienes in order to clarify the role of such imido groups in determining the orientation of the addition reactions, and also the addition modes in their own polymerizations. The addition reactions of…
Synthesis and properties of polymersChemistry and Chemical EngineeringChemical Reactions and Mechanisms
W. Hertl、W. W. Pultz1967-07-01Journal of the American Ceramic Society
The vaporization rate of solid SiO was studied in the temperature range 1005° to 1475°C. It was concluded that ( a ) in an argon atmosphere the vaporization rate is external gas diffusion controlled; ( b ) only the upper layers of the charge contribute to the vaporization, so that a zero‐order process is observed; ( c…
Phase Equilibria and ThermodynamicsForce Microscopy Techniques and ApplicationsCrystallization and Solubility Studies
J. E. Gillott1967-07-01Journal of Applied Chemistry
Abstract The carbonatation of calcium hydroxide has been re‐investigated using thermal and X ‐ray diffraction methods of analysis. The crystal size and morphology of Ca(OH) 2 vary with the method of preparation, which also affects the rate and mechanism of the carbonatation reaction. This is also dependent upon the re…
Calcium Carbonate Crystallization and InhibitionCrystallization and Solubility StudiesThermal and Kinetic Analysis
Lieng‐Huang Lee1967-07-01Journal of Polymer Science Part A-2 Polymer Physics
Abstract It is possible to identify three distinct types of polymer adhesion on the basis of the physical state of adhesive and adherend: ( 1 ) rubbery polymer–rubbery polymer (R–R adhesion); ( 2 ) rubbery polymer–glassy polymer (R–G adhesion); ( 3 ) rubbery polymer–nonpolymer (R–S adhesion). Limitations of the diffus…
Polymer crystallization and propertiesMaterial Dynamics and PropertiesAdsorption, diffusion, and thermodynamic properties of materials
J. J. Martin、P. H. Sidles、G. C. Danielson1967-07-01Journal of Applied Physics
The thermal diffusivity of five platinum samples with resistivity ratios of 12, 34, 100, 900, and 5000 has been measured from 300° to 1200°K. Only the sample with the resistivity ratio of 12 showed deviations of more than 3% from the average thermal diffusivity of the two purest samples. Thermal conductivity values ha…
Geothermal Energy Systems and ApplicationsThermal properties of materialsSurface and Thin Film Phenomena
F. R. Dammont、T. K. Kwei1967-07-01Journal of Polymer Science Part A-2 Polymer Physics
Abstract The α, β, and γ transitions at temperatures between −200 and +100°C. of crosslinked aromatic and aliphatic epoxy polymers were determined from damping and shear modulus data, and compared with their fluorine containing analogs. Loci of segmental relaxation are suggested at various temperatures, and similariti…
Epoxy Resin Curing ProcessesFiber-reinforced polymer compositesSynthesis and properties of polymers
Kōji Wada1967-07-01Clay Minerals
Abstract The OH-OD exchange of kaolin minerals through contact with D 2 O introduced into interlayer space via intersalation resulted in a partial shift of the OH absorption bands. The total decrease in OH absorbance upon deuteralion was 52, 56, and 47% for the kaolinite, dickite-nacrite, and halloysite respectively,…
Soil and Unsaturated FlowClay minerals and soil interactionsGeochemistry and Geologic Mapping
P. E. Fielding、R. C. Jarnagin1967-07-01The Journal of Chemical Physics
The emission lifetimes of matrix-stabilized dimers of anthracene and its derivatives were observed. The two principal conformations considered were the sandwich excimers and the 55° dimers. The excimer lifetimes may be of use in establishing wavefunctions for these transient states. A comparison of the lifetimes and e…
Mass Spectrometry Techniques and ApplicationsPhotochemistry and Electron Transfer StudiesLuminescence and Fluorescent Materials
M.‐A. ARMOUR、Alwyn G. Davies、Jnanendra Upadhyay 等 4 位作者1967-07-01Journal of Polymer Science Part A-1 Polymer Chemistry
Abstract Furan, pyrrole, and thiophene were polymerized under catalysis by trichloro‐ and trifluoroacetic acid to produce colored polymers which were characterized by various methods, including electronic and proton magnetic resonance spectra and electrical conductances of deeply colored trichloroacetic acid adducts.…
Organic Electronics and PhotovoltaicsElectrochemical sensors and biosensorsConducting polymers and applications
Murray Goodman、Martin L. Falxa1967-07-01Journal of the American Chemical Society
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTConformational aspects of polypeptide structure. XXIII. Photoisomerization of azoaromatic polypeptidesMurray. Goodman and Martin L. FalxaCite this: J. Am. Chem. Soc. 1967, 89, 15, 3863–3867Publication Date (Print):July 1, 1967Publication History Published online1 May 2002Pub…
Chemical Synthesis and AnalysisClick Chemistry and ApplicationsPhotochromic and Fluorescence Chemistry
Russell G. West、A. C. Blankenship1967-07-01Journal of the American Ceramic Society
Dense lithium ferrite ceramic bodies prepared by hot‐pressing exhibited rectangular hysteresis loops. A number of physical properties of technical interest were evaluated and results given. These include initial permeability, dc resistivity, resonance Une width, g eff factor, and saturation magnetization. The effect o…
Advancements in Battery MaterialsMagnetic Properties and Synthesis of FerritesMagneto-Optical Properties and Applications
E. Strick1967-07-01Geophysical Journal International
Perhaps the best theoretical approximation to the experimentally observed attenuation and spreading of seismic body waves is due to Futterman. Wuenschel has utilized the Pierre shale field data of McDonal et al. as well as his own two-dimensional model work using plexiglas sheet, to obtain remarkable confirmation of F…
Ultrasonics and Acoustic Wave PropagationHigh-Velocity Impact and Material BehaviorStructural Response to Dynamic Loads
Yutaka Kojima、Hiroshi Fujisawa、Atsushi Nakazawa 等 8 位作者1967-07-01Journal of Biological Chemistry
Pyrocatechasewas purified from extracts of benzoateinduced cells of Pseudomonas arvilta.The most purified preparation had a specific activity of 29.6, about 50% higher than that previously reported, and was homogeneous as judged by ultracentrifugation and by electrophoresis.The molecular weight was estimated to be app…
Nanoparticle-Based Drug DeliveryCarbon Nanotubes in CompositesElectrohydrodynamics and Fluid Dynamics
D.K. Davies1967-07-01Journal of Scientific Instruments
An experimental technique has been developed for the absolute measurement of the density of a surface charge on a dielectric. The apparatus is described and includes provision for producing the surface charges by electron and ultra-violet irradiation, and by the contact of metal electrodes of known differences in work…
High voltage insulation and dielectric phenomenaAnalytical Chemistry and SensorsSurface Roughness and Optical Measurements
Jean‐Marie André、Louis Gouverneur、Et Georges Leroy1967-07-01International Journal of Quantum Chemistry
Abstract On décrit le formalisme de la méthode LCAO SCF CO permettant d'étudier les propriétés des systèmes périodiques conjugés et un procédé semi‐empirique pour évaluer les intégrales intervenant dans les éléments de matrice de l'operateur du champ autocohérent de ces systèmes.
Graphene research and applicationsCatalytic Processes in Materials ScienceMembrane Separation and Gas Transport
Arie Ram、Ehud Finkelstein、C Elata1967-07-01Industrial & Engineering Chemistry Process Design and Development
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTReduction of Friction in Oil Pipelines by Polymer AdditivesArie Ram, Ehud Finkelstein, and Chaim ElataCite this: Ind. Eng. Chem. Process Des. Dev. 1967, 6, 3, 309–313Publication Date (Print):July 1, 1967Publication History Published online1 May 2002Published inissue 1 July 1…
Corrosion Behavior and InhibitionNon-Destructive Testing TechniquesGeotechnical Engineering and Underground Structures