Richard Dalven1973-12-15Physical review. B, Solid state
The empirical relation ${E}_{0}\ensuremath{\propto}(\frac{1}{{a}_{0}^{2}})$ between the energy gap ${E}_{0}$ and lattice constant ${a}_{0}$ has been found to hold for a wide range of semiconductors with the cubic NaCl crystal structure.
Semiconductor Quantum Structures and DevicesChemical and Physical Properties of MaterialsSurface and Thin Film Phenomena
P. H. Citrin1973-12-15Physical review. B, Solid state
X-ray photoemission spectra of valence and core electrons in sodium and sodium hydroxide were measured from clean and oxidized sodium-metal films. Clean metal surfaces were prepared by sequential evaporation, with the resultant films contaminated by less than half a monolayer of impurity after 8 h running time. From t…
X-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy TechniquesSurface and Thin Film Phenomena
P. Tronc、M. Bensoussan、Alain Brenac 等 4 位作者1973-12-15Physical review. B, Solid state
Optical-absorption-edge measurements and Raman scattering experiments on ${\mathrm{Ge}}_{x}{\mathrm{Se}}_{1\ensuremath{-}x}$ glasses are reported for the range $0\ensuremath{\le}x\ensuremath{\le}0.4$. The change in the magnitude of the main peaks of Raman spectra (localized about 195, 215, and 250 ${\mathrm{cm}}^{\ens…
Glass properties and applicationsChalcogenide Semiconductor Thin FilmsPhase-change materials and chalcogenides
Jiří Polák、Benjamin C.‐Y. Lu1973-12-15Canadian Journal of Chemistry
Mutual solubilities of 14 paraffinic and 6 aromatic hydrocarbons and water were determined experimentally at 0 and 25 °C. The solubilities are generally smaller at 0 than at 25 °C except the solubilities of paraffins in water which are larger at 0 than at 25 °C. The coefficients of the Redlich–Kister equation were eva…
Petroleum Processing and AnalysisCrystallization and Solubility StudiesChemical and Physical Properties in Aqueous Solutions
J. J. PAPIKE、C. T. PREWITT、S. SUENO 等 4 位作者1973-12-01Zeitschrift für Kristallographie - Crystalline Materials
Article Pyroxenes: comparisons of real and ideal structural topologies was published on December 1, 1973 in the journal Zeitschrift für Kristallographie - Crystalline Materials (volume 138, issue 1-6).
Polymer Nanocomposites and PropertiesSilicone and Siloxane Chemistry
Kenneth J.D. MacKenzie1973-12-01Journal of Applied Chemistry and Biotechnology
Abstract A simple method is described for making infrared measurements on solids at temperatures up to the melting point of KBr by using a fine nichrome heating coil wound directly on to the KBr disc containing the sample either in suspension or sedimented on to the surface. The usefulness of the method is illustrated…
Geological and Geochemical AnalysisClay minerals and soil interactionsGeochemistry and Geologic Mapping
P Gard1973-12-01Journal of Physics A Mathematical Nuclear and General
The paper outlines the way in which the constructive method obtained for symmetrizing nth Kronecker powers of induced representations (see ibid., vol. 6, no. 12, 1807 (1973)) may be applied to space group representations. Also a step by step procedure is given for finding the symmetrized cubes of space group represent…
Advanced Topics in AlgebraSilicone and Siloxane ChemistryMolecular spectroscopy and chirality
G.W. Lewthwaite1973-12-01Philosophical magazine
A general expression for the creep strain produced by a distribution of dislocation loops is derived and applied to the nucleation (assumed subject to Boltzmann statistics) of prismatic loops in b.c.c. and f.c.c. metals and alloys subjected to neutron irradiation. The nucleation of the loops is considered to take plac…
Microstructure and Mechanical Properties of SteelsFusion materials and technologiesNuclear Materials and Properties
F. B. Huck、Wm. R. Savage、J. W. Schweitzer1973-12-01Physical review. B, Solid state
The magnetic susceptibilities of a series of $\ensuremath{\alpha}$-phase Cu-Al and dilute magnetic Cu-Al(Fe) alloys with Fe concentrations near 0.07 at.% have been measured over the temperature interval from 1.5 to 300 K and at six magnetic fields in the range from 3.95 to 12.75 kOe. The alloys had Al concentrations o…
Rare-earth and actinide compoundsMagnetic Properties and ApplicationsMagnetic Properties of Alloys
David Hall、James R. Horne1973-12-01Journal of Applied Polymer Science
Abstract A method for obtaining triacetate having a D.S. of 3.0 has been obtained by acetylating the cellulose with acetic anhydride–pyridine reagent containing a catalytic amount of acetyl chloride. The process is rapid and nondegradative. Cellulose tricarbanilate can be prepared without recourse to pyridine solution…
Advanced Cellulose Research Studies
J F Verrill1973-12-01Journal of Physics E Scientific Instruments
Groove profiles from a number of diffraction gratings have been examined with the Talystep using a 0.1 mu m stylus. Useful results have been obtained with groove densities up to 1200 mm -1 . The method has some advantages over electron microscope techniques.
Advanced Measurement and Metrology TechniquesOptical Coatings and GratingsSurface Roughness and Optical Measurements
Kazuyuki Ueda、Ryuichi Shimizu1973-12-01Japanese Journal of Applied Physics
The relationship between photoelectric work function and impurity concentration (sulfur) on the Fe (100) surface was investigated by Fowler's method combined with Auger electron spectroscopy (AES). Sulfur was separated markedly when the sample was heated at higher temperatures. As sulfur on the sample surface increese…
Electron and X-Ray Spectroscopy Techniquesnanoparticles nucleation surface interactionsSurface and Thin Film Phenomena
Balbir Singh1973-12-01Philosophical magazine
Growth behaviour of four individual voids has been studied using 1 MeV electron irradiation in a high voltage electron microscope. Direct evidence is presented to show that the growth rate of voids is reduced markedly as the distance between the growing voids and grain boundaries becomes smaller than the ‘defect deple…
Microstructure and Mechanical Properties of SteelsFusion materials and technologiesHydrogen embrittlement and corrosion behaviors in metals
James R. Wait、David A. Hill1973-12-01Radio Science
The boundary value problem posed is a truncated cylindrical region excited by a specified distribution of electric current over a concentric cylindrical surface. The end conditions are that the total normal current density is zero. The solution is carried through for excitation by a symmetrically located axial current…
Numerical methods in inverse problemsMagnetic Properties and ApplicationsNon-Destructive Testing Techniques
C. Mahaux1973-12-01Annual Review of Nuclear Science
Following a major shortage of 99Mo in the 2009–2010 period, concern grew that the aging reactor production facilities needed to be replaced. Most producers were using highly enriched 235U (HEU) as the target material. The Organisation for Economic Co-...Read More
Nuclear reactor physics and engineeringGraphite, nuclear technology, radiation studiesNuclear and radioactivity studies
Mirek Úředníček、J. S. Kirkaldy1973-12-01International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)
Article Mechanism of Iron Attack Inhibition Arising from Additions of Aluminium to Liquid Zn(Fe) During Galvanizing at 450°C was published on December 1, 1973 in the journal International Journal of Materials Research (volume 64, issue 12).
Material Properties and Applications
A. R. Long1973-12-01Journal of Physics F Metal Physics
Measurements of the attenuation of high frequency ( approximately 100 GHz) phonons in copper and in superconducting aluminium are described. The phonons are generated and detected by means of superconducting tunnel junctions; a brief analysis of this novel experimental technique is included. The attenuation lengths ob…
Electronic Packaging and Soldering TechnologiesCopper Interconnects and ReliabilitySemiconductor materials and interfaces
Mekhola Sinha、D. J. Lloyd、K. Tangri1973-12-01Philosophical magazine
Strain rate cycling and stress relaxation experiments were performed to investigate the yielding behaviors and rate-controlling mechanism in nominally pure MgO crystals deformed in cube orientation over the temperature range 77°K to 673°K. Analysis of various activation parameters at different temperatures with respec…
Advanced ceramic materials synthesisMicrostructure and mechanical propertiesHigh-pressure geophysics and materials
Ho-Yuan Yu、W. F. Leonard1973-12-01Journal of Applied Physics
Measurements of thermoelectric power, resistivity, and the temperature coefficient of resistance have been made on annealed silver films. The values obtained for the energy dependence of the mean free path of conduction electrons, [(∂ lnλ/∂ lnW)]W=WF, and the Fermi surface area, [(∂ lnA/∂ lnW)]W=WF, were 1.29 and −2.4…
Electronic Packaging and Soldering TechnologiesCopper Interconnects and ReliabilitySurface and Thin Film Phenomena
R. Casanova Alig、Robert C. Duncan、B. J. Mokross1973-12-01The Journal of Chemical Physics
The visible absorption and emission spectra of Tm2+ in SrCl2 sharpen at low temperatures and exhibit marked vibronic structure. The 4f12 3H6 5deg excited states account for these transitions. The splitting of these states is almost entirely due to the 4f-5d electrostatic interaction. For theory and experiment to agree…
Advanced Chemical Physics StudiesLuminescence Properties of Advanced MaterialsLanthanide and Transition Metal Complexes