Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A theoretical and experimental study of the electronic and magnetic structure of Fe 2 P 1-x Si x is performed. A hexagonal-orthorhombic crystal structure transition occurs with increasing Si substitution. The latter crystal structure is extremely complex with six inequivalent Fe sites. The magnetic moments, as obtaine…
We have studied the formation of cuspidal pits during the growth of strained SixGe1−x alloy layers at relatively high supersaturations. The pit formation is directly linked to strain in the alloy layer, and we propose a heterogeneous formation mechanism in which the pits develop from stress-driven surface diffusion as…
Photoluminescence spectra from the Si impurity center in diamond films grown by chemical-vapor deposition techniques were studied at temperatures between 9 and 300 K. Laser excitation at 514.5 nm, and resonant with the zero-phonon absorption line at 737 nm (1.6823 eV), were used. Luminescence lines become narrowed at…
Leakage currents in epitaxial ferroelectric/perovskite-conductor heterostructures reproducibly show diode properties having hysteresis. The hysteresis appears in forward bias, which is positive for electron (n) type conductors and negative for hole (p) type conductors. The hysteresis is due to the increase of conducti…
The energy distribution of ${L}_{3}{M}_{4,5}{M}_{4,5}$ Auger electrons emitted from solid Ag is studied as a function of the exciting photon energy in the ${L}_{3}$ threshold region. The $^{1}G_{4}$ Auger line not only exhibits a Raman-type energy dispersion and a reduced core hole lifetime broadening, but its line sh…
A new, step bunching instability in the growth of stepped surfaces by molecular beam epitaxy MBE is described. It is produced by an elastic mechanism, and is different from the instability discovered by Asaro and Tiller and by Grinfeld. Unlike the Asaro-Tiller-Grinfeld instability (which is expected to occur only unde…
Cr 2 Ge 2 Te 6 is a new layered material belonging to the lamellar ternary M 2 X 2 Te 6 chalcogenides family (where M is a 3 + oxidation state metal and X 2 a silicon or a germanium pair). It was synthesized from a stoichiometric mixture of the elements and heated in a sealed evacuated quartz tube for 20 d at 700 degr…
Recently, electrochromic thin films and thin film devices have attracted more and more interest because of strong possibility to act as smart windows and smart glass that may be widely used in the daily life[1]. The electrochromic thin film devices usually have a five layers structure: an actual electrochromic layer,…
Liquid crystals have long been investigated for non-mechanical beam steering devices. Previous work has approached beam steering by using an electrically addressed cell with multiple electrodes arranged in stripes. By creating a series of steps in the index of refraction profile, the beam experiences an effective wedg…
There is an urgent need to monitor the condition of fluid-filled taped (FFT) cables. The dissolved-gas analysis (DGA) technique that has been successfully applied to power transformers holds great potential for the preventive maintenance of FFT cables. However, before this emerging technique can be properly applied to…
Subcritical crack growth (SCG) and creep deformation at elevated temperatures were investigated in three types of silicon nitrides and glass ceramics under quasi-static and cyclic loading conditions. The SCG behavior was observed at lower temperature in the silicon nitrides which has lower flexural strength at elevate…
ナイロン6およびナイロン6と3種類の熱可塑性ダイマー酸系重合脂肪酸ポリアミド系エラストマーを混合したポリマーアロイの力学特性について検討した. エラストマー添加量の増加による分散粒子径の増大と結晶化度の低下とともに弾性率と降伏強度の低下が生じた. ナイロン6の衝撃強さは18℃から45℃まで昇温しても低い値が示した. これに対し, ナイロン6のポリマーアロイの衝撃強さは温度の上昇につれて著しく向上した. また破壊面と損傷領域のSEMの観察によってナイロン6の破壊プロセスがノッチ先端での塑性拘束による脆性破壊であることを明らかにした. ナイロン6のポリマーアロイの破壊は23℃の場合ナイロン6と同様でノッチ先端の塑性拘束によるものである…
目的 衣料用繊維材料の乾燥過程の研究として, 積層布の乾燥過程を研究することを目的とし, ポリエステルとレーヨンの平織布を積層した試料の乾燥特性曲線と含水率分布を測定した.成果 乾燥速度が減少し始める限界点における各積層布の含水率 (限界含水率) が, 1枚で乾燥したときの限界含水率に等しいことが分かった.このことは, 異種の布を重ねても成り立つことが分かった.また, 減率乾燥速度期における乾燥特性曲線において積層枚数が増えるほど乾燥速度が下がる積層の効果が確認された.この効果は, 斜めの含水率分布が原因となって起こり, レーヨン布で特に顕著であった.
無電解銅めっきによる針状結晶形成に及ぼす素材および下地処理の影響を調べた。バイアホールの深さ方向に対する影響は非常に大きく, 深いほど針状結晶が形成しにくくなった。これは, 無電解銅めっきの反応種を供給するための液循環や生成水素ガスの脱離などが大きく関与しており, それゆえ, 基板の揺動速度の上昇に伴って改善された。また, 下地銅の違いは, 触媒付与工程でのパラジウム析出量には差異を生じたが, 無電解銅めっきの針状結晶形成にはほとんど影響がなかった。さらに次亜りん酸塩+ほう酸, またはジメチルアミンボラン (DMAB) +ほう酸を用いた促進処理は, 著しくめっき析出性を改善した。この促進処理は, パラジウム触媒中の吸蔵水素量を高め…
"Advanced technology of brazing copper‐steel and steel sections." Welding International, 9(6), pp. 473–474
A soft-spin Heisenberg model is used to investigate the Curie temperature of elementary iron and iron-rich intermetallics such as Sm2Fe17. In the localized limit the mean-field solution of the classical Heisenberg model is reproduced, while quasi-localized perturbation theory accounts for band-structure effects. An ex…
The effects of a horizontal and a vertical DC magnetic field on the Rayleigh-Taylor instability between two inviscid liquid metals were studied by linear analysis. Since the dispersion relation in the vertical field is in the same form as that in the horizontal field, the stability characteristics of the interface are…
Abstract Twin structure of triclinic sodium oxalate monohydrate was determined by means of X‐ray techniques. The twin is formed by reticular pseudomerohedry, with [101] as twin axis and ( 1 01) as contact plane.
This paper introduces ten dimensionless groups formed from material properties and machine variables by analysis of the energies involved. These groups can be used as independent variables instead of the individual parameters to represent and analyse the test results with far greater efficiency.
The Ceramic-Matrix-Composites (CMCs) have come into prominence for structural applications because of their superior mechanical properties both at room temperature and at elevated temperatures. In conventional processing route of pressureless sintering, the rigid reinforcement phase (particulate or whisker) severly re…