Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The ‘‘hyperfine magnetic field’’- Hhpf at the nuclei of the diamagnetic atoms 119Sn was measured in Heusler alloy Ni2MnSn by Mössbauer absorption spectroscopy for pressures up to 10.8 GPa at room temperature. The pressure dependences of HhpfSn does not show hysteresis and can be fitted by a linear function HhpfSn(P)/H…
The polymerization of isobutylene and styrene was studied using the 2-chloro-2,4,4-trimethylpentane/TiCl4 initiating system in the presence of a proton trap in halogenated hydrocarbons as solvents at −80°C. The polymerization of isobutylene was found to be living, and both homopolymers were soluble in n-butyl chloride…
Abstract Differences in processability between linear low denisty polyethylene (LLDPE) and low density polyethylene (LDPE) as well as for their blends subjected to extensional flow were assessed in terms of melt strength and elastic parameters from shear flow such as storage modulus (G′), and first normal stress diffe…
The thermal conductivities of two lithium aluminosilicate glass‐ceramic matrix composites reinforced with 30 vol% of either SiC VS (rice hull) whiskers or SiC VLS (vapor‐liquid‐solid) whiskers were determined from room temperature to 500°C. Because of the preferred alignment of the whiskers, the thermal conductivity v…
Traditional algorithms for evaluation of electrostatic forces in molecular dynamics simulations of proteins require computational work of the order O(N 2) for a system of N atoms. Truncation methods, which try to avoid that effort, entail intolerably large errors in forces, energies and other observables. Hierarchical…
The crystal structure of La 1− x Sr x CoO 3−δ (0≤ x ≤0.6) has been studied, using powder X-Ray diffraction. The crystal structure shows a transition from rhombohedral distorted perovskite for LaCoO 3−δ into cubic perovskite for La 0.4 Sr 0.6 CoO 3−δ . The cubic unit cell parameter is a c =3.8342(1) Å for La 0.4 Sr 0.6…
Abstract Mooney viscosities and thixotropic behavior have been determined for SBR melts containing carbon black and/or ground vulcanizate particles. A composition containing ambiently ground rubber has a higher viscosity than one with cryogenically ground rubber. This is attributed to occlusion of continuum rubber wit…
An approach to plotting hysteresis curves of soft magnetic materials using a personal computer assisted measuring system is presented. The resulting hysteresis curves provide enough detail to allow determination of the parameters required for a simulation with PSPICE (Jiles-Atherton model) or the Hodgdon/Carpenter mod…
Thin films of CdSe were deposited by a chemical bath technique from citratocadmium(II) or tartratocadmium(II) complex ions and N,N-dimethylselenourea. The final thicknesses of the films were from the citrate bath and from the tartrate bath, when the depositions were made at room temperature. The films are uniform and…
The plasma characteristics of a new arc mode on carbon referred to as the ‘‘stationary cathodic arc’’ are reported. Particularly, optical emission spectroscopy, probe and ion energy distribution measurements are used to compare the properties of the stationary arc with the normal ‘‘random cathodic arc’’ on carbon. The…
For near-α titanium alloys IMI 834 and TIMETAL 1100 oxidation behaviour was investigated as a function of microstructure. Isothermal thermogravimetry was performed at 750°C for 100 h in air. The morphologies and compositions of the scales produced were examined using scaninng and analytical electron microscopy and X-r…
Eight-coordination and identical ligand environments have been unequivocally established in the pair of stable iron(II) and iron(III) complexes shown on the right. The synthesis, structures and electrochemical properties of these iron complexes are presented here, together with some Mössbauer spectroscopic data on the…
Abstract A previously developed mathematical wetting model is generalized and applied to the following two closely related situations: the spreading of a liquid over a prewet solid surface and the receding contact‐line motion with a microscopic residual film, remaining behind the contact line. An analytical expression…
Abstract Here we report on investigations that have revealed for the first time that the Cs + ion templates the same metal germanium sulfide open‐framework as (CH 3 ) 4 N + (TMA + ), and that metal complexing agents enhance crystal size by at least two orders of magnitude. The synthesis, structures and thermal propert…
In our studies of the stability constants of metal complexes, we have investigated a number of macrocyclic ligands with pendant donor groups. The ligands are characterized by the fact that they have nitrogen donors in the macrocyclic ring and oxygen or sulfur donors in the pendant arms. These ligands represent seven d…
Analog zur Synthese von MCM–41 kann aus Zirconiumsulfat, das in Lösung mit Alkyltrimethylammoniumverbindungen versetzt wird, ein mesostrukturiertes Produkt (schematisch im Bild rechts) hergestellt werden. Nach Stabilisierung mit Phosphorsäure ist dieses Material calcinierbar, ohne daß die Struktur kollabiert. Das resu…
All the tert-butyl groups of [Er{N(tBu)[Si(CH3)2(H)]}3] (structure shown on the right) reside on the same face of the N3 plane, whereas all SiCH3 groups are rotated toward the periphery of the molecule. This results in ErH interatomic distances of 231.7–236.7 pm for the SiH moieties folded in toward the metal cente…
Possible point groups and elastic properties are discussed for a solid with two-dimensional quasiperiodic and one-dimensional periodic structures. The point groups and Laue classes are given for such structures with Fourier modulus of rank 5. The numbers of independent second-order elastic constants are calculated and…
The influence of microstructure of CuCr contact materials on dielectric strength in a vacuum is investigated. Experimental results show that breakdown selectively occurs on dielectrically weak phases. For the Cu50Cr50 alloy, it first takes place on Cr particles, and for the CuCr50Sel alloy, on the Cu/sub 2/Se phase. A…
Nutrients were extracted from samples of two Ohio soils derived from Wisconsin‐age glacial till, a Crosby silt loam (Aerie Ochraqualfs, fine, mixed, mesic) and a Hoytville silty clay (Mollic Ochraqualfs, fine, illitic, mesic) using the Mehlich‐3 extractant, and also using Bray‐1 for phosphorus (P) and ammonium acetate…