M. H. Leipold、T. H. Nielsen1964-09-01Journal of the American Ceramic Society
Tensile, creep, and modulus of elasticity data were determined for hot‐pressed zirconium carbide. The material was relatively impure, containing 1 to 2% nitrogen and 1 to 2% free carbon. Tension and creep properties, which were measured to 2600° C, indicated that above 2100°C the strength was 2000 psi or lower and the…
High Temperature Alloys and CreepNuclear Materials and PropertiesAdvanced materials and composites
R. Postle、P.D. Burton、M. Chaikin1964-09-01Journal of the Textile Institute Transactions
The expression for the torque in a twisted yarn is derived by summing the components of torque due to fibre tension, fibre torsion, and fibre bending. Of these three components, the sum of the last two is small compared with the torque due to fibre tension and hence the instantaneous torque L may be estimated simply b…
Mechanical Behavior of CompositesTextile materials and evaluationsMechanical Engineering and Vibrations Research
R. Salmon1964-09-01Journal of Soil Science
Summary Wyoming bentonite, Blisworth illite, and a fen peat were saturated with different proportions of calcium, magnesium, and potassium, and exchange between these cations was studied by measuring their activity ratios in dilute equilibrium solutions. With both clays the activity ratio aMg/aCa in solution was linea…
Soil and Unsaturated FlowClay minerals and soil interactionsPeatlands and Wetlands Ecology
M. Krishna Murthy、J. AGUAYO1964-09-01Journal of the American Ceramic Society
Phase equilibrium relations in the system Na 2 O‐GeO 2 have been determined using standard quenching techniques supplemented by differential thermal analysis. Two congruently melting compounds, Na 2 O·GeO 2 and 2Na 2 O·9GeO 2 , exist; the melting points are 1103°± 15°C and 1073°± 3°C, respectively. The eutectic temper…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsMicrowave Dielectric Ceramics Synthesis
N. D. Greene、G. A. Saltzman1964-09-01CORROSION
Cold work markedly decreases the corrosion resistance of steel in acid solutions. This effect has been studied by electrochemical measurements and weight loss tests on zone-refined iron and carbon steels exposed to sulfuric and hydrochloric acids. The mechanism of this phenomenon is discussed in detail.
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
G. M. Badger、Richard A. Jones、RL Laslett1964-09-01Australian Journal of Chemistry
Three meso-tetra(o-substituted phenyl)porphins have been prepared by the Rothemund reaction, and a by-product has been isolated from one reaction mixture. The mechanism of the Rothemund reaction is discussed.
Supramolecular Chemistry and ComplexesPorphyrin and Phthalocyanine ChemistryPorphyrin Metabolism and Disorders
Roy Brand1964-09-01Textile Research Journal
Effective research on the aesthetic characteristies of fabries is difficult because ex plicit definitions are lacking in this field. The most reliable tool is subjective evalua tion: therefore, words ( loft, clammy, hard, etc.) become important research tools. Special meanings of these words become clear if they are l…
Textile materials and evaluations
Lawrence S. Bartell、R. M. Gavin1964-09-01Journal of the American Chemical Society
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTEffects of Electron Correlation in X-Ray and Electron DiffractionL. S. Bartell and R. M. GavinCite this: J. Am. Chem. Soc. 1964, 86, 17, 3493–3498Publication Date (Print):September 1, 1964Publication History Published online1 May 2002Published inissue 1 September 1964https:/…
X-ray Spectroscopy and Fluorescence AnalysisX-ray Diffraction in CrystallographyCrystallography and Radiation Phenomena
W. C. Sheehan、Tim Cole1964-09-01Journal of Applied Polymer Science
Abstract The effects of the conditions fiber formation on structural parameters and tensile properties of melt‐spun, highly isotactic polypropylene filaments were investigated to determine the feasibility of producing supertenacity polypropylene filaments. Meltspun polypropylene monofilaments were prepared from five h…
Polymer crystallization and propertiesNatural Fiber Reinforced Compositesbiodegradable polymer synthesis and properties
R.D. Mathieu1964-09-01AIAA Journal
Analytical results are presented for the transient ablation performance of a high-performance castable ablation resin for which spallation is responsible for the char removal. The mechanism for the spallation process is assumed to depend upon the internal stress due to the gas pressure drop through the char and a crit…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchHigh-Temperature Coating Behaviors
T. Y. Tien1964-09-01Journal of the American Ceramic Society
The electrical conductivity of compositions in the system ZrO 2 ‐CaZrO 3 was examined. The composition of maximum conductivity in this system is within the cubic solid‐solution region close to the low‐calcia cubic solid‐solution phase boundary. The conductivity decreases from the single‐phase cubic solid solution to b…
Advancements in Solid Oxide Fuel Cells
Albert Napolitano、Earl G. Hawkins1964-09-01Journal of Research of the National Bureau of Standards Section A Physics and Chemistry
The viscos ity o f a soda -lime-sili ca g lass has bce n m eas urcd a t t he Nat io na l B urcau of Stand a rd s a nd se ven oth er la bo ratories. D ete rmin atio ns wc rc mad e in t hc ra nge of 102 t o 10 15 p oises. The rotat in g cy lind er was u sed at t he hig her t em pcrat urcs (800 to 1450 C) a nd t hc fib e…
Glass properties and applications
Maurice L. Huggins1964-09-01Journal of the American Chemical Society
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTA Revised Theory of High Polymer SolutionsMaurice L. HugginsCite this: J. Am. Chem. Soc. 1964, 86, 17, 3535–3540Publication Date (Print):September 1, 1964Publication History Published online1 May 2002Published inissue 1 September 1964https://pubs.acs.org/doi/10.1021/ja01071a…
Polymer crystallization and propertiesAdvanced Polymer Synthesis and Characterization
Herbert H. Uhlig、J. R. Gilman1964-09-01CORROSION
Pitting of 18-8 stainless steel in 1-15 percent FeCl3 solutions is completely inhibited by NaNO3 additions. The critical activity of NO3− required for inhibition is related to Cl− activity by the relation: log(Cl−) = 1.92 log(NO3−) + 1.34. This equation can be derived on the view that competitive adsorption occurs bet…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
K. G. SHIPP1964-09-01The Journal of Organic Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTReactions of α-Substituted Polynitrotoluenes. I. Synthesis of 2,2',4,4',6,6'-HexanitrostilbeneK. G. ShippCite this: J. Org. Chem. 1964, 29, 9, 2620–2623Publication Date (Print):September 1, 1964Publication History Published online1 May 2002Published inissue 1 September 1964h…
Inorganic and Organometallic ChemistrySynthesis and properties of polymersChemical Reactions and Mechanisms
R. P. Rastogi、P. S. Bassi1964-09-01The Journal of Physical Chemistry
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTMechanism of Eutectic CrystallizationR. P. Rastogi and Parmjit S. BassiCite this: J. Phys. Chem. 1964, 68, 9, 2398–2406Publication Date (Print):September 1, 1964Publication History Published online1 May 2002Published inissue 1 September 1964https://pubs.acs.org/doi/10.1021/j…
Crystallization and Solubility Studies
William M. Jackson、Robert T. Conley1964-09-01Journal of Applied Polymer Science
Abstract The degradation of phenol–formaldehyde polycondensates has been investigated at temperatures as high as 1000°C. By employing infrared spectrophotometric techniques and vapor‐phase chromatographic methods, as well as thermogravimetric and x‐ray analyses, it has been possible to examine the oxidation chemistry…
Epoxy Resin Curing ProcessesFlame retardant materials and propertiesSynthesis and properties of polymers
A. Meyer、- Beckum1964-09-01Materiales de Construccion
Not available
T. O. Shakhbazyan1964-09-01Materiales de Construccion
Not available
Equipo Editorial1964-09-01Materiales de Construccion