Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A superstructural nanocomposite of Mo 2 N quantum dots@MoO 3 @nitrogen-doped carbon is synthesized to overcome the disadvantages of poor cycling stability and low ionic/electronic conductivity of the MoO 3 anode in lithium-ion batteries. In this novel nanocomposite, Mo 2 N, which is calculated to demonstrate metallic…
BACKGROUND: Acute myeloid leukemia (AML) is a typically fatal malignancy and new drug and treatment need to be developed for a better survival outcome. Cold atmospheric plasma (CAP) is a novel technology, which has been widely applied in biomedicine, especially in various of cancer treatment. However, the changes in c…
Abstract Fabric‐based electronic textiles (e‐textiles) have been investigated for the fabrication of high‐performance wearable electronic devices with good durability. Current e‐textile technology is limited by not only the delicate characteristics of the materials used but also by the fabric substrates, which impose…
Unicellular microalgae are a valuable source of macro- and micronutrients. They contain, for example, proteins that are potentially useful as new emulsifiers. The aim of this study was to investigate the emulsifying properties of a less-refined lyophilized crude water-soluble extract (WSE), obtained from the heterotro…
The solubility parameters of four ionic liquids (ILs), 1-ethyl-3-methylimidazolium methyl sulfate ([EMIM][MeSO 4 ]), 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO 4 ]), 1-hexyl-3-methylimidazolium methyl sulfate ([HMIM][MeSO 4 ]), and 1-octyl-3-methylimidazolium methyl sulfate ([OMIM][MeSO 4 ]), were estimat…
Abstract Nitrogen‐vacancy (NV) quantum magnetometers offer exceptional sensitivity and long‐term stability. However, their use to date in distributed sensing applications, including remote detection of ferrous metals, geophysics, and biosensing, is limited due to the need to combine optical, microwave (MW), and magnet…
Transition metal dichalcogenides (TMDs) are highly desirable 2-Dimensional (2D) materials that have become the focus of intense investigative efforts over the last decade. The deisrable properties of TMDs arise from the many possible combinations of a transition metal atom with two chalcogen atoms to form the 2D TMD m…
Selective syntheses of symmetrical siloxanes and cyclotetrasiloxanes are attained from reactions of silanes and dihydrosilanes, respectively, with water, and the reactions are catalyzed by a NNN H t Bu cobalt(II) pincer complex. Interestingly, when phenylsilane was subjected to catalysis with water, a siloxane cage co…
In this paper, an ultra-sensitive metamaterial terahertz sensor is proposed. The resonance sensor is designed based on a novel double corrugation form to enhance the ability of the sensor in the terms of sensitivity, Q-factor and the maximum sensible thickness of an analyte. The introduced structure can support the sp…
Poly(vinylidene fluoride) has attracted interest from the biomaterials community owing to its stimuli responsive piezoelectric property and promising results for application in the field of tissue engineering. Here, solution blow spinning and electrospinning were employed to fabricate PVDF fibres and the variation in…
Abstract Tin diselenide (SnSe2), as an anode material, has outstanding potential for use in advanced lithium‐ion batteries. However, like other tin‐based anodes, SnSe2 suffers from poor cycle life and low rate capability due to large volume expansion during the repeated Li+ insertion/de‐insertion process. This work re…
Abstract Objective Evaluate the adhesive behavior of conventional and high‐translucent zirconia after surface conditioning and hydrothermal aging. Materials and Methods Conventional (ZrC) and high‐translucent zirconia (ZrT) specimens were divided into six groups: without surface treatment (ZrC and ZrT), air‐borne part…
Oligomeric organophosphorus flame retardants (o-OPFRs) are extensively used as substitutes for decabromodiphenyl ether. However, little is currently known about their occurrence in aquatic environments, their bioaccumulation, or their trophic transfer. In this study, concentrations of two o-OPFRs, bisphenol A bis(diph…
Abstract Two-dimensional (2D) nanomaterials have been extensively explored as promising candidates for gas sensing due to their high surface-to-volume ratio. Among many 2D nanomaterials, molybdenum disulfide (MoS 2 ) is known to be functional in detecting harmful gases at room temperature; therefore, it has been activ…
Perovskite-based thin-film solar cells today reach power conversion efficiencies of more than 22%. Methylammonium lead iodide (MAPI) is prototypical for this material class of hybrid halide perovskite semiconductors and at the focal point of interest for a growing community in research and engineering. Here, a detaile…
Heating neutral beam (HNB) injectors, necessary to achieve burning conditions and to control plasma instabilities in ITER, are characterized by such demanding parameters that a neutral beam test facility (NBTF) dedicated to their development and optimization is being realized in Padua (Italy) with direct contributions…
, CZTS) were produced by cold-pressing and sintering of CZTS powders obtained via reactive ball-milling. An increase in the Seebeck coefficient of more than 100 μV/K, almost doubling the expected value, is noticed around a temperature of 260 °C. As pointed out by thermal analyses, this is due to a second order transit…
Ultrahigh strength and good ductility are obtained for two low-alloy transformation-induced-plasticity steels fabricated by the quenching and partitioning (Q&P) processing, respectively. Compared to 0.19 wt.% C steel in which γ → α'-martensite transformation is the dominant mechanism under deformation, the relatively…
Abstract The development of new battery technology that utilizes abundant electrode materials that are environmentally benign is an important area of research. To alleviate the reliance on Li‐ion batteries new energy storage mechanisms are urgently needed. To address these issues, MnO 2 nanowires were investigated as…
Hydrated cementitious fines can be recycled by thermal treatment (<500°C) as an alternative binder with low energy consumption and carbon dioxide (CO2) emissions during production. This paper analyzed the transformations of the phases during the dehydration and rehydration of slag–portland cement pastes using laser di…