Jing Zhu、King Jet Tseng、C.F. Foo2000-01-01IEEE Transactions on Magnetics
Multi-segment cores have been developed by cutting standard MnZn ferrite cores into thin segments and then re-assembling the segments together. All the segments were separated by a thin film of air or insulation materials of microscopic dimensions. The core loss properties of these experimental samples have been inves…
Magnetic properties of thin filmsMagnetic Properties and Synthesis of FerritesMagnetic Properties and Applications
Rosa Marı́a Sebastián、Anne‐Marie Caminade、Jean‐Pierre Majoral 等 6 位作者2000-01-01Chemical Communications
Electroactive conjugated polymers have been synthesized by electropolymerisation of increasing generations of dendrimers derivatized by peripheral bithiophene groups.
Conducting polymers and applicationsLuminescence and Fluorescent MaterialsDendrimers and Hyperbranched Polymers
Zhiqiang Xu、Laurence K. Thompson、Craig J. Matthews 等 9 位作者2000-01-01Journal of the Chemical Society Dalton Transactions
Dinuclear and tetranuclear copper(II) complexes of three polydentate diazine ligands (pahap, pmhap, bdpah), based on potentially bridging N–N single bond fragments, are reported. The 2∶2 complexes [Cu2(pahap)2(NO3)(H2O)2][NO3]3·H2O (1) and [Cu2(pmhap)2(NO3)2][NO3]2·3H2O (2) involve dinuclear centres bridged by two N–N…
Metal-Organic Frameworks: Synthesis and ApplicationsMetal complexes synthesis and propertiesMagnetism in coordination complexes
Yutaka FUJIWARA、Hidehiko Enomoto2000-01-01Journal of The Electrochemical Society
Cu‐Zn alloys were deposited under potentiostatic conditions from cyanide baths with varied Cu + / Zn 2 + concentration ratio but with the same free CN − concentration. The Zn content of the deposits showed the maximum at around −1.4 V vs. Ag/AgCl as a function of the applied potential. The deposits obtained at −1.4 V…
Nanoporous metals and alloysMetallurgy and Material Science
Bryan Fausett、Michael C. Granger、Mateusz L. Hupert 等 6 位作者2000-01-01Electroanalysis
Nanocrystalline diamond thin-films have been synthesized in CH4/Ar (argon) and CH4/N2 gas mixtures without the addition of molecular hydrogen. Atomic force microscopy analysis demonstrates that the C60/Ar films consist of hemispherical features about 150 nm in diameter with a height of 20 nm. The mean roughness over a…
Semiconductor materials and devicesDiamond and Carbon-based Materials ResearchForce Microscopy Techniques and Applications
Stephen A. Langer、Andrea J. Liu2000-01-01Europhysics Letters (EPL)
We conduct numerical simulations on a simple model of a two-dimensional steady-state sheared foam, and define a quantity Γ that measures stress fluctuations in the constant-area system. This quantity reduces to the temperature in an equilibrium system. We find that the relation between the viscosity and Γ is the same…
Phase Equilibria and ThermodynamicsMaterial Dynamics and PropertiesPickering emulsions and particle stabilization
J. Walter2000-01-01Advanced Materials
Reducing the dimensionality can dramatically improve the physical properties of some compounds. Quasi two-dimensional palladium nanoparticles have been obtained using a graphite lattice as a template. The hexagonal symmetry of the carbon host lattice was found to impose a hexagonal symmetry on the Pd atoms (see Figure…
Graphene research and applicationsCatalytic Processes in Materials ScienceNanomaterials for catalytic reactions
Radomír Čabala、Jiří Škarda、Karin Potje‐Kamloth2000-01-01Physical Chemistry Chemical Physics
The results of a UV/VIS spectroscopic investigation of thin films of oxidized polypyrrole doped with p-toluenesulfonate, dodecylsulfate or copper phthalocyanine tetrasulfonate anions immediately after electrochemical synthesis and during heat treatment are presented. The absorption bands in the resulting spectra were…
Advanced Sensor and Energy Harvesting MaterialsConducting polymers and applicationsAnalytical Chemistry and Sensors
Hyun Chul Jung、Seohyun Kang、W. N. Kim 等 7 位作者2000-01-01Journal of Applied Polymer Science
Polyurethanes were synthesized using the high functional 4,4′-diphenylmethane diisocyanate (MDI), polyester polyol, and 1,4-butane diol. The synthesized polyurethanes were analyzed using differential scanning calorimeter (DSC), dynamic mechanical thermal analysis (DMTA), Fourier transform infrared (FTIR) spectrometer,…
Polymer Nanocomposites and PropertiesPolymer composites and self-healingEpoxy Resin Curing Processes
Katarzyna Górna、S. Gogolewski2000-01-01OpenAlex
Biodegradable polyurethanes with various hydrophilic-to-hydrophobic ratios and potential application for nonadhesive barriers in surgery and/or scaffolds for tissue engineering and bone substitutes were synthesized from polycaprolactone diol, mixtures of polycaprolactone and polyethylene oxide diols, hexamethylene- an…
biodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical ApplicationsPolymer composites and self-healing
Jae-Sun Kim、Soon‐Gil Yoon2000-01-01Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena
High dielectric constant (Ba0.65Sr0.35)(Ti0.41Zr0.59)O3 (BSTZ) thin films were prepared on Pt/Ti/SiO2/Si substrates at 500 °C from the target composition of (Ba0.65Sr0.35)(Ti0.65Zr0.35)O3 by the rf magnetron sputtering technique and evaluated as a function of annealing temperature. The 95-nm-thick BSTZ films showed a…
Ferroelectric and Piezoelectric MaterialsMicrowave Dielectric Ceramics SynthesisDielectric properties of ceramics
Michael Witschas、Hellmut Eckert、D. Wilmer 等 9 位作者2000-01-01Zeitschrift für Physikalische Chemie
The high-temperature phase of sodium ortho-phosphate, α -Na
Solid-state spectroscopy and crystallographyChemical Synthesis and Characterization
Junwang Tang、Tao Zhang、Dongbai Liang 等 6 位作者2000-01-01Chemical Communications
By coupling microwave discharge with an Fe/HZSM-5 catalyst, novel effects have been observed for the conversion of NO to N2 in the presence of excess oxygen with high efficiency.
Catalytic Processes in Materials ScienceAmmonia Synthesis and Nitrogen ReductionIndustrial Gas Emission Control
Stefan Hecht、Todd Emrick、Jean M. J. Fréchet2000-01-01Chemical Communications
A new class of porphyrin containing hyperbranched polymers has been prepared via proton-transfer polymerisation utilising an A2 + B3 approach, thus providing an accelerated entry into the construction of branched multiporphyrin architectures.
Porphyrin and Phthalocyanine ChemistryLuminescence and Fluorescent MaterialsDendrimers and Hyperbranched Polymers
Hiroyuki Yamamoto、Chikako Horita、Yukiko Senoo 等 5 位作者2000-01-01Journal of Applied Polymer Science
Different characteristic surface structures such as capsules, regularly spaced droplets, and fibers are formed by electrostatic interaction between poly-L-lysine (PLL) and gellan gum via polyion complex (PIC) formation. Spherical droplet PIC capsules of varying diameters form in solutions. Some dyes adsorb on the surf…
Hydrogels: synthesis, properties, applicationsbiodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical Applications
Géraud Dubois、Catherine Reyé、Robert J. P. Corriu 等 4 位作者2000-01-01Journal of Materials Chemistry
Dibenzo-18-crown-6 ether derivatives bearing two (1, 2) or four (3) hydrolysable Si(OR)3 groups have been synthesised. Their hydrolysis and polycondensation gave rise to new hybrid organic–inorganic materials incorporating dibenzo-18-crown-6 ether moieties covalently linked to silica by two or four Si–C bonds. The com…
Mesoporous Materials and CatalysisPolyoxometalates: Synthesis and ApplicationsSilicone and Siloxane Chemistry
Yasuhide Nakayama、Shogo Nishi、Hatsue Ishibashi‐Ueda 等 4 位作者2000-01-01Journal of Biomedical Materials Research
A micropatterned microporous segmented polyurethane film (20 x 12 mm in size, 30 micrometer thick) with four regions was prepared by excimer laser microprocessing to provide an in vivo model of transmural tissue ingrowth in an open cell-structured scaffold specially designed for cardiovascular tissue engineering. Thre…
Bone Tissue Engineering MaterialsElectrospun Nanofibers in Biomedical ApplicationsTissue Engineering and Regenerative Medicine
Philip Hodge、Zhuo Yang、Abderrazak Ben-Haida 等 4 位作者2000-01-01Journal of Materials Chemistry
Commercial poly(ethylene naphthalene-2,6-dicarboxylate) (PEN) was cyclo-depolymerised by treatment of a suspension in 1,2-dichlorobenzene at 180 °C with 3 mol% of di-n-butyltin oxide as a catalyst. The cyclic oligomers, produced in up to 93% yield, were characterised by gel permeation chromatography, 1H NMR spectrosco…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesSynthesis and properties of polymers
John N. Hay、David W. Porter、Hema M. Raval2000-01-01Journal of Materials Chemistry
The non-hydrolytic sol–gel route has been used to provide a versatile synthesis of organically-modified silicas (ormosils), via a rapid, facile reaction in the absence of any solvent. The ormosils are synthesised by reaction of silicon halides with alkoxides, where one or both of the reactants contains the organic sub…
Mesoporous Materials and CatalysisPolyoxometalates: Synthesis and ApplicationsLayered Double Hydroxides Synthesis and Applications
Rahela Gašparac、Charles R. Martin、Ema Stupnišek-Lisac 等 4 位作者2000-01-01Journal of The Electrochemical Society
The objective of this work was to investigate the efficiency of imidazole derivatives for corrosion inhibition of copper in 0.5 M hydrochloric acid. Corrosion inhibition was studied using impedance spectroscopy. Imidazole and its derivatives 4‐methylimidazole, 4‐methyl‐5‐hydroxymethylimidazole, 1‐phenyl‐4‐methylimidaz…
Corrosion Behavior and InhibitionAnalytical Chemistry and SensorsConcrete Corrosion and Durability