M. Lamine Boubakar、Sylvain Moyne、Christian Lexcellent 等 4 位作者1999-01-01Journal of Engineering Materials and Technology
A tridimensional finite element model of isothermal pseudoelastic deformations is proposed in order to analyze and predict the behavior of shape memory alloys (SMA). To perform finite strain calculations, the mechanical modeling is based on a formulation in a non material rotating frame. The constitutive equations in…
Composite Structure Analysis and OptimizationStructural Load-Bearing AnalysisShape Memory Alloy Transformations
Ramazan Çıtak、Kirk Rogers、Ken H. Sandhage1999-01-01Journal of the American Ceramic Society
BaAl 2 O 4 /aluminum‐bearing composites have been synthesized via the low‐temperature oxidation of Ba‐Al precursors. Ba‐Al powder mixtures that were prepared via high‐energy vibratory milling were uniaxially pressed into bar‐shaped specimens that were then exposed to a series of heat treatments in pure, flowing oxygen…
Advanced ceramic materials synthesisIntermetallics and Advanced Alloy PropertiesMXene and MAX Phase Materials
Joël S. Rossier、Hubert H. Girault1999-01-01Physical Chemistry Chemical Physics
A carbon conductive film consisting of nanometer sized domains has been patterned by scanning photoablation of polystyrene. The film formation involves the photoablation of a highly insulating polymer, and the redeposition of conductive carbon fragments. This film has been investigated by scanning electron microscopy,…
Diamond and Carbon-based Materials ResearchAnalytical Chemistry and SensorsElectrohydrodynamics and Fluid Dynamics
Jun-Ichiro Furihata、Toshitaka Okabe1999-01-01Journal of Electron Microscopy
Two types of crystalline approximants of the decagonal phase have been found in the Al-Cu-Cr system by electron microscopy, in specimens annealed at 1050°C. The structures are orthorhombic with lattice parameters of a = 1.48 nm, b = 1.26 nm, c = 1.27 nm, and base-centered orthorhombic with lattice parameters of a = 2.…
Quasicrystal Structures and PropertiesX-ray Diffraction in Crystallography
Roberto Napolitano、Beniamino Pirozzi1999-01-01Macromolecular Theory and Simulations
Molecular mechanics methods have been used in order to find the conformations of various syndiotactic polymers in crystals. Three different classes of polymers have been examined: i) polyolefins, such as poly(propylene), polystyrene, poly(1-butene) and poly(1,2-butadiene); ii) polydienes, such as cis-1,4-poly(1,3-pent…
Organometallic Complex Synthesis and CatalysisPolymer crystallization and propertiesAdvanced Physical and Chemical Molecular Interactions
Mathias Gruen、Christian F. W. Becker、Andrea Beste 等 6 位作者1999-01-01Nucleosides and Nucleotides
Ara-adenosine (adenine 9-β-D-arabinofuranoside) and ara-guanosine (guanine 9-β-D-arabinofuranoside) are converted into 2′ halogenated ATP and GTP analogues by triflation and subsequent inversion of configuration at C-2′. For the commercially unavailable ara-guanosine a short synthesis starting from guanosine is presen…
Glycosylation and Glycoproteins ResearchEnzyme Structure and FunctionBiochemical and Molecular Research
Zhaoqi Zhan、Hua Chun Zeng1999-01-01Journal of Materials Chemistry
The self-catalytic role of zirconium n-propoxide (ZP) has been investigated with respect to the synthetic parameters of ZrO 2 –SiO 2 binary gels. It is found that gelation time can be shortened with a high concentration of tetraethoxysilane (TEOS) in the presence of a small amount of ZP. There are two different gelati…
Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisCatalysis and Oxidation Reactions
Derek Whitelock、G. H. Brusewitz、Afshin J. Ghajar1999-01-01Transactions of the ASAE
Many product thermal/physical properties used as model inputs are highly variable and some have not beenindependently determined. The chosen values of these properties can affect the accuracy of weight loss predictions.Peaches were selected as the product to study and three parameters, skin mass transfer coefficient (…
Textile materials and evaluations
D V Alexandrov、Alexander Churbanov、П. Н. Вабищевич1999-01-01International Journal of Fluid Mechanics Research
A formation of a mushy region (two-phase zone) for binary melt solidification is theoretically studied on the basis of numerical calculations. The velocity of solidification is determined in the form of a linear function of time for one-dimensional unidirectional solidification regime from a solid wall which is cooled…
Solidification and crystal growth phenomenaMaterial Science and Thermodynamics
B.K. Gaur、Hrishikesh S. Srinivasan1999-01-01British Corrosion Journal
The corrosion performance of various stainless steels, nickel alloys, and refractory metals has been evaluated in hot (up to 95°C) methane sulphonic acid. Studies included weight loss coupon exposure tests and potentiodynamic polarisation measurements. Also, the corrosion inhibiting effect of some inorganic inhibitors…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsMaterial Properties and Failure Mechanisms
T. Tanabe、Shunsuke Muto1999-01-01Physica Scripta
The most widely accepted model for development of defect structure in neutron irradiated graphite has been such that following the first production of a pair of an interstitial and vacancy, di-interstitials and vacancies are formed and their subsequent growth would result in the production of an interstitial plane or…
Diamond and Carbon-based Materials ResearchFusion materials and technologiesGraphite, nuclear technology, radiation studies
Michael C. Burrell、John J. Chera1999-01-01Surface Science Spectra
A spin cast film of poly(bisphenol-A carbonate) was analyzed by XPS using monochromatic Al Kα excitation. The measured atomic composition closely matched the expected stoichiometry of the polymer. Peak positions of the individual chemically shifted C 1s and O 1s components are reported. The results are in general agre…
Corrosion Behavior and InhibitionX-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy Techniques
T. E. Mann、Julie A. Haley、D. Lacey1999-01-01Journal of Materials Chemistry
For the first time the four stereoisomers of a tetrameric side-chain liquid crystalline cyclic siloxane have been isolated in a pure state by high performance liquid chromatography. The structure of one of the stereoisomers was confirmed by 1 H, 13 C and 29 Si NMR. The structures of the remaining three stereoisomers w…
Liquid Crystal Research AdvancementsSurface Modification and SuperhydrophobicityMass Spectrometry Techniques and Applications
J-M Le Breton、S. Steyaert1999-01-01Journal of Physics Condensed Matter
The dissociation process of the Nd 2 Fe 14 B phase in a sintered Nd 16 Fe 76 B 8 powdered magnet was investigated between 300 and 650 °C. The oxidized powders were characterized by Mössbauer spectrometry and x-ray diffraction. The contributions of the dissociation products to the Mössbauer spectra were identified and…
Magnetic properties of thin filmsRare-earth and actinide compoundsMagnetic Properties of Alloys
Yoji Shibutani、Mikio Shiozaki、Tetsuya Kugimiya 等 4 位作者1999-01-01Journal of the Japan Institute of Metals and Materials
Carbon nanotubes are expected to be one of future fiber materials with extremely high tensile rigidity. Many reports concerning their physical and chemical properties have been published, while there are not enough studies on mechanical properties yet. In the present paper, the structural stability and the mechanical…
Carbon Nanotubes in CompositesBoron and Carbon Nanomaterials ResearchFiber-reinforced polymer composites
Norihiro Itsubo、Ryōichi Yamamoto1999-01-01Journal of the Japan Institute of Metals and Materials
Life cycle assessment (LCA) is a broad topic that is currently being discussed. However, little is known about the assessment method of environmental impacts expressing a single index, especially in Japan.Non ferrous metals are one of the basic materials for industrial products. The establishment of the assessment for…
Metallurgy and Material Science
Hiroyoshi Higuchi、R. Kanno、Yuichi Kawamoto 等 5 位作者1999-01-01Physics and chemistry of glasses
The local structures around gallium, germanium and erbium ions in glasses of composition (70-x)GaS 3/2 .xGeS 2 .20LaS 3/2 .10ErS 3/2 (x=0, 5, 10, 20, 30 and 35 in mol%) were investigated by means of EXAFS spectroscopy. The coordination numbers of sulphide ions around gallium and germanium ions, and the Ga-S and Ge-S b…
Glass properties and applicationsPhase-change materials and chalcogenidesSolid-state spectroscopy and crystallography
U. Fischer、A. Möslang、А. А. Иванов1999-01-01Fusion Technology
An evaluation is presented of the gas dynamic trap (GDT) mirror machine as intense neutron source for fusion material test irradiations. This includes an assessment of the neutronics characteristics of the GDT as compared to future fusion reactor systems (ITER, Demo) and the IFMIF neutron source as well as a detailed…
Magnetic confinement fusion researchFusion materials and technologiesNuclear Physics and Applications
J.C. Wren、Will Long、Christopher Moore 等 4 位作者1999-01-01Nuclear Technology
The performance of charcoal filters for removing radioiodine from airstreams has been studied under conditions associated with routine reactor operations, as well as under conditions expected following an accident. These studies have led to the development of a physical model that can predict the time-dependent behavi…
Radioactive element chemistry and processingCovalent Organic Framework ApplicationsIndustrial Gas Emission Control
Chang Kiu Lee、Eun Ju Kim、Jung Ho Jun1999-01-01Bulletin of the Korean Chemical Society
β-Cyclodextrin, amylose, and cellulose were partially methylated and acetylated in order to examine the relative reactivities of 2-, 3-, and 6-OH groups to alkylation and acylation. The partially methylated samples of the polysaccharides were treated with excess of ethyl iodide and sodium hydroxide in dimethyl sulfoxi…
Advanced Cellulose Research StudiesEnzyme Production and Characterization