Chandan Sharma、K. Vadera、Rohit Agarwal1993-01-01Pigment & Resin Technology
In the past, solvents containing impregnation systems were in vogue, e.g. phenoloic‐alkyd, isophthalic polyester, silicone, etc. for electrical machines. The disadvantages of solvent borne impregnants are a higher dissipation factor (at elevated temperatures) and water absorption, etc., due to the presence of air void…
Fuel Cells and Related MaterialsProcess Optimization and IntegrationSynthesis and properties of polymers
Philip Luner、Ya Jun Zhou、P. CALUWE 等 4 位作者1993-01-01OpenAlex
Among the most extensively used chemicals in the paper industry are wet strength resins. They enhance the performance of paper products ranging from tissue to board. Environmental concerns are questioning the use of several of these additives and a strong effort is being made to replace these chemicals with benign one…
Advanced Cellulose Research StudiesLignin and Wood ChemistryMaterial Properties and Processing
J-C Druart、François Straub1993-01-01Cryptogamie Algologie
National audience
Aquatic Ecosystems and Phytoplankton DynamicsDiatoms and Algae Research
Yutaka Yamada、Osami Seri、Kosuke Tagashira 等 4 位作者1993-01-01Journal of The Surface Finishing Society of Japan
The pitting corrosion of copper in cold water containing inhibitors composed of nitrilotris methylene triphosphonic acid (ATMP), benzotriazole (BTA) and zinc sulfate (ZnSO4) has been studied using immersion tests and electrochemical measurements. The results obtained are summarized as follows: 1) Pitting corrosion was…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
Koji Tachibana、Masa-aki Mizushiro、Yukiko Kumagai1993-01-01Corrosion engineering digest
Changing the timing of fluoride ion addition, passivation behavior at constant potentials and anodic polarization one for SUS 304 stainless steel were investigated in sodium sulfate aqueous solutions of pH 2-13, along with ICP analysis of solutions and XPS one of passive film. No pitting corrosion occurred for SUS 304…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsNon-Destructive Testing Techniques
Ryo Matsuhashi、Satoshi Ito、Eiji Sato1993-01-01Corrosion engineering digest
In order to confirm the general applicability of the previously proposed GI (General Corrosion Resistance Index) value1), influence of temperature upon the corrosion rates of three series of stainless steels (Fe-Cr, Fe-Cr-Ni, Fe-Cr-Ni-Mo alloys) in 10.2mol·kg-1 H2SO4 aqueous solution was studied. Though measured parti…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
Toshiya Watanabe、Toshihiro AOSHIMA、Tetsuo KITABAYASHI 等 4 位作者1993-01-01Journal of the Ceramic Society of Japan
Alumina ceramics containing various amounts of TiO2 were fabricated by sintering in humid reducing atmospheres and also in air. The sintered samples were treated at various temperatures in reducing atmospheres. The electrical resistivity measurments and microstructural observation were conducted on the obtained sample…
Advanced ceramic materials synthesis
Y. Yamaguchi、Kenneth M. Dinndorf、H. P. Jenssen 等 4 位作者1993-01-01Advanced Solid-State Lasers
A single crystal of Nd:KYF4 is grown by top- seeded solution growth. Absorption and fluorescence spectra reveal multiple Nd sites in the material.
Luminescence Properties of Advanced MaterialsSolid State Laser TechnologiesLanthanide and Transition Metal Complexes
Warren F. Knoff1993-01-01Journal of the Textile Institute
The deformation of equivalent size and shape glass, asbestos and Kevlar∗aramid fibrils, when subjected to bending or longitudinal compressive loads, was estimated based on published mechanical properly data and established mechanical analysis. Based on this analysis, Kevlar fibrils are expected to deform more easily t…
Textile materials and evaluations
Kambiz Vafai1993-01-01Journal of Thermophysics and Heat Transfer
The insulating capability of a typical Fiberglas insulation slab exposed to different types of environment on each side of the slab was evaluated, based on theory that takes into account heat conduction, natural convection, phase changes, and gas infiltration. The results are analyzed and combined with recent theoreti…
Building Energy and Comfort OptimizationTextile materials and evaluationsRadiative Heat Transfer Studies
Ronald Smith1993-01-01ASM International eBooks
Abstract This article discusses the susceptibility of carbon steels to hydrogen-induced cracking, solidification cracking, lamellar tearing, weld metal porosity, and heat-affected zone (HAZ) mechanical property variations. The composition and mechanical properties of selected carbon steels used in arc welding applicat…
Hydrogen embrittlement and corrosion behaviors in metalsWelding Techniques and Residual StressesMetal Alloys Wear and Properties
Yutaka Yamada、Osami Seri、Kosuke Tagashira 等 4 位作者1993-01-01Corrosion engineering digest
The pitting corrosion of copper in cold water containing inhibitors composed of amino trimethylene phosphonic acid (ATMP), benzotriazole (BTA) and zinc sulfate (ZnSO4) has been studied by the immersion test and electrochemical measurements. The results obtained are summarized as follows: 1) the pitting corrosion of co…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability
S. C. Abrahams1993-01-01Ferroelectrics
Yuhuan Xu. North-Holland, Amsterdam, London, New York, Tokyo. 1991. xiv + 391 pp., 177 Figures, 50 Tables. US $171.50, Dfl. 300.00, ISBN 0-444-883 54-1.”
Solid-state spectroscopy and crystallography
Toshiaki Ohkura、K. Sakagami、Takao Matsuda 等 4 位作者1993-01-01Journal of Geography (Chigaku Zasshi)
Volcanic ash soils occur widely on South Kanto district. The surface soil has black color and high humus content. The parent material is derived from Holocene volcanic ash. There are some buried humic horizons resulted from a succession of volcanic ash accumulation and plant residue supply leading to the accumulation…
Geological and Geochemical AnalysisClay minerals and soil interactionsTherapeutic Uses of Natural Elements
W.F. Powers1993-01-01IEEE Transactions on Industry Applications
An overview of the most current information on several different constructions and materials that help combat water treeing is presented. After a brief description of the treeing phenomenon, the author covers accelerated cable life testing, noting the various compounds normally used as the insulation for the medium vo…
High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationThermal Analysis in Power Transmission
Tom Blanton1993-01-01Advances in X-ray Analysis
Two-dimensional detectors utilized in x-ray diffraction studies are described. Film, image intensifier/CCD camera, two-dimensional position-sensitive area, and photostimulable storage phosphor detectors are compared. The storage phosphor detector was found to be well suited for analysis of oriented semicrystalline pol…
Cultural Heritage Materials AnalysisNuclear Physics and ApplicationsX-ray Diffraction in Crystallography
J. Steiger、S. Blässer、Olaf Boebel 等 6 位作者1993-01-01Zeitschrift für Physikalische Chemie
Epitaxial Nb and Nb Ti Nb films on sapphire substrates were prepared by e beam evaporation and sealed with thin Pd or Au layers to avoid oxidation. Hydrogen charging was performed from the gas phase and the concentration in the films was measured by the N 15 nuclear reaction method. For the single Nb layer the hydroge…
Advanced Chemical Physics StudiesFusion materials and technologiesSuperconducting Materials and Applications
作者信息未提供1993-01-01Zeitschrift für Kristallographie - Crystalline Materials
Article Crystal structure of (tetrahydrothiophene)-trichlorogold(III), C4H8AuCl3S was published on January 1, 1993 in the journal Zeitschrift für Kristallographie - Crystalline Materials (volume 208, issue 1).
Organometallic Complex Synthesis and CatalysisMetal complexes synthesis and propertiesMagnetism in coordination complexes
Bryan J. McEntire、R. R. Hengst、William T. Collins 等 5 位作者1993-01-01Journal of Engineering for Gas Turbines and Power
Norton/TRW Ceramics (NTC) is developing ceramic components as part of the DOE-sponsored Advanced Turbine Technology Applications Project (ATTAP). NTC’s work is directed at developing manufacturing technologies for rotors, stators, vane-seat platforms, and scrolls. The first three components are being produced from a H…
Advanced ceramic materials synthesisAdvanced materials and compositesTunneling and Rock Mechanics
I. Juchnovski、E. Veltcheva、T. Kolev1993-01-01Spectroscopy Letters
Infrared spectra of pthtalic anhydride and phthalic anhydride-18O have been measured in the solide state and in solutions in the 4000 – 100 cm−1 frequency region. Their linear dichroic infrared spectra in oriented nematic solutions in the nematic liquid cristal ZLI-1538 (4000 – 400 cm−1) have also been recorded and st…
Liquid Crystal Research AdvancementsSolid-state spectroscopy and crystallographyMolecular spectroscopy and chirality