Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
AbstractWhile 32 nm lithography technology is on the horizon for integrated circuit (IC) fabrication, matching the pace for miniaturization with optics has been hampered by the diffraction limit. However, development of nanoscale components and guiding methods is burgeoning through advances in fabrication techniques a…
AbstractWe present synthesis, structure and magnetic properties of structurally well-ordered single-crystalline β-MnO2nanorods of 50–100 nm diameter and several µm length. Thorough structural characterization shows that the basic β-MnO2material is covered by a thin surface layer (∼2.5 nm) of α-Mn2O3phase with a reduce…
Nanocrystalline TiO2 was synthesized by controlled hydrolysis of titanium tetraisopropoxide. The anatase phase was converted to rutile phase by thermal treatment at 1023 K for 11 h. The catalysts were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier-transform infrared absorptio…
AbstractWe have investigated the effects of dipping time, solution concentration and solvent type on the formation of self-assembled monolayers with aminosiloxane molecules (i.e.,N-(3 trimethoxysilylpropyl)diethylenetriamine (TPDA)) on the Si(001) surface. Studies performed with an ellipsometer showed that monolayers…
AbstractIn the following review we discuss several types of nanoparticles (such as TiO2, quantum dots, and gold nanoparticles) and their impact on the ability to image biological components in fixed cells. The review also discusses factors influencing nanoparticle imaging and uptake in live cells in vitro. Due to thei…
AbstractTungsten oxide (WO3) nanorods array prepared using chemical vapor deposition techniques was studied. The influence of oxygen gas concentration on the nanoscale tungsten oxide structure was observed; it was responsible for the stoichiometric and morphology variation from nanoscale particle to nanorods array. Ex…
AbstractThe Class F fly ash has been subjected to high energy ball milling and has been converted into nanostructured material. The nano structured fly ash has been characterized for its particle size by using particle size analyzer, specific surface area with the help of BET surface area apparatus, structure by X-ray…
AbstractSnS nanocrystals (NCs) were synthesized from bis(diethyldithiocarbamato) tin(II) in oleylamine at elevated temperature. High-resolution transmission electron microscopy (HRTEM) investigation and X-ray diffraction (XRD) analysis showed that the synthesized SnS particles are monocrystalline with an orthorhombic…
AbstractElectron structure of a silicon quantum dot doped with a shallow hydrogen-like donor has been calculated for the electron states above the optical gap. Within the framework of the envelope-function approach we have calculated the fine splitting of the ground sixfold degenerate electron state as a function of t…
AbstractA family of unusually stable boron cages was identified and examined using first-principles local-density functional method. The structure of the fullerenes is similar to that of the B12icosahedron and consists of six crossing double-rings. The energetically most stable fullerene is made up of 180 boron atoms.…
AbstractWe demonstrate multiple wavelength InGaAs quantum dot lasers using ion implantation induced intermixing. Proton implantation, followed by annealing is used to create differential interdiffusion in the active region of the devices. The characteristics (lasing-spectra, threshold currents and slope efficiencies)…
AbstractTungsten trioxide nanorods have been generated by the thermal decomposition (450 °C) of tetrabutylammonium decatungstate. The synthesized tungsten trioxide (WO3) nanorods have been characterized by XRD, Raman, SEM, TEM, HRTEM and cyclic voltammetry. High resolution transmission electron microscopy and X-ray di…
AbstractNonequilibrium periodic nanostructures such as nanoscale ripples, mounds and rhomboidal pyramids formed on Rh(110) are particularly interesting as candidate model systems with enhanced catalytic reactivity, since they are endowed with steep facets running along nonequilibrium low-symmetry directions, exposing…
AbstractSilica xerogels containing Sm3+ions and SnO2nanocrystals were prepared in a sol–gel process. The image of transmission electron microscopy (TEM) shows that the SnO2nanocrystals are dispersed in the silica matrix. The X-ray diffraction (XRD) of the sample confirms the tetragonal phase of SnO2. The xerogels cont…
AbstractWithin the linear response theory, a local bond-polarization model based on the displacement–displacement Green’s function and the Born potential including central and non-central interatomic forces is used to investigate the Raman response and the phonon band structure of Ge nanostructures. In particular, a s…
AbstractInAs/GaAs heterostructures have been simultaneously grown by molecular beam epitaxy on GaAs (100), GaAs (100) with a 2° misorientation angle towards [01−1], and GaAs (n11)B (n = 9, 7, 5) substrates. While the substrate misorientation angle increased from 0° to 15.8°, a clear evolution from quantum dots to quan…
AbstractHigh-temperature exposure of a Mo(110) surface to borazine (HBNH)3leads to the formation of two distinctly different self-assembling nanostructures. Depending on the substrate temperature during preparation, either well-aligned, ultra-thin boron nanowires or a single-layer stripe structure of hexagonal boron n…
AbstractWe investigated the optical properties of colloidal-synthesized ZnO spherical nanoparticles prepared from 1-octadecene (OD), a mixture of trioctylamine (TOA) and OD (1:10), and a mixture of trioctylphosphine oxide (TOPO) and OD (1:12). It is found that the green photoluminescence (PL) of samples from the mixtu…
AbstractFor the first time, a complex formed by polyaniline (in its organic metal form) and silver has been deposited on copper in nanoparticulate form. When depositing on Cu pads of printed circuit boards it efficiently protects against oxidation and preserves its solderability. The deposited layer has a thickness of…
AbstractHere we report a very simple method to convert conventional CuO powders to nanoparticle interlinked microsphere cages by solution method. CuO is dissolved into aqueous ammonia, and the solution is diluted by alcohol and dip coating onto a glass substrate. Drying at 80 °C, the nanostructures with bunchy nanopar…