Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Ni–SiC composite coatings are successfully employed as a protective coating in the inner walls of engine cylinders. In this study, Ni-SiC, Ni-SiC-MoS2 and Ni-SiC-Gr composite coatings were prepared from a sulfamate bath. Both mechanical and ultrasonic stirring were used simultaneously during the process. Taking into a…
Effects of discontinuous ultrasonic treatment on the microstructure, nanoparticle distribution, and mechanical properties of cast Al413-SiCnp nanocomposites were studied. The results showed that discontinuous ultrasonic treatment was more effective in improving the mechanical properties of the cast nanocomposites than…
In this research, crystallization of Fe36Cr12Mo10 and α-Fe phases in devitrification of Fe51Cr18Mo7B16C4Nb4 amorphous alloy was studied using X-ray diffraction and transmission electron microscopy. For evaluation of crystallization kinetics, differential scanning calorimetric tests were carried out at different heatin…
In this study, AlN whiskers were prepared in a tube furnace at 1000˚C for 1h with 500 nitrogen gas flow. Al powders with particle size of 3 μm and 45 μm and NH4Cl were used as raw materials. SEM, TEM and XRD analysis were used to characterize AlN whiskers. The results showed that the diameters of AlN whiskers would ra…
In this study, at first Al-Al2O3 composite powders having different volume fractions of Al2O3 (0, 10, 20, 30 and 40 vol.%) were produced by low energy mechanical alloying, which were used as foam materials. Then, composite foams with 50, 60, and 70 percent of porosity were produced by space-holder technique. Spherical…
Theoretical basis of isotopic oxygen exchange in a gas-solid oxide system are considered. A generalized model is suggested that accounts for diffusion of tracer oxygen atoms and allows within a single approach to perform numeric analysis of isotope experiments implemented in reactors of various types and in different…
We used DNA self-assembly methods to fabricate a series of core-shell gold nanoparticle-DNA-colloidal quantum dot (AuNP-DNA-Qdot) nanoclusters with satellite-like architecture to modulate optical (photoluminescence) response. By varying the intercomponent distance through the DNA linker length designs, we demonstrate…
We predict that the recently discovered quasi-one-dimensional superconductors, A 2 Cr 3 As 3 (A=K,Rb), possess strong frustrated magnetic fluctuations and are nearby a novel in-out co-planar magnetic ground state. The frustrated magnetism is very sensitive to the c-axis lattice constant and can thus be suppressed by i…
Protein coronas have been the focus of a great deal of study recently due to their inevitable formation and their impact on the biological consequences of nanomaterials. Although the field is still far from completely and definitively understanding protein coronas, we now have a good understanding of their behavior an…
This paper deals with the characterization of magnetic iron oxide nanoparticles. Pure magnetite (Fe3O4) and noble metal doped magnetite were synthesized following a new sustainable microwave-assisted method. Furthermore, an experimental analysis was carried out to investigate the chemical and magnetic properties of th…
Here we present the formation of predominantly sp(2)-coordinate carbon with magnetic- and heteroatom-induced structural defects in a graphene lattice by a stoichiometric dehalogenation of perchlorinated (hetero)aromatic precursors [hexachlorobenzene, C6Cl6 (HCB), and pentachloropyridine, NC5Cl5 (PCP)] with transition…
The electrical performance of MoS2 can be engineered by introducing high-κ dielectrics, while the interactions between high-κ dielectrics and MoS2 need to be studied. In this study, multilayer MoS2 field-effect transistors (FETs) with a back-gated configuration were fabricated on high-κ Al2O3 coated Si substrates. Com…
A detailed analysis on the thermal degradation of nitrate based molten salts evaluating the influence of different impurities and heating rates in their maximum working temperature is presented. Determining the maximum operating temperature is of interest when searching for new heat transfer fluids (HTF) for high temp…
We deeply investigated the chemical reaction network of molten nitrate / nitrite salt mixtures at high temperatures (> 450 °C) and proved530 °C as maximum operating temperature of HITEC ® in CSP application with potential for further temperature increase by implementation of technical measures. Particularly the level…
Increasing rates of antimicrobial resistance have left a significant gap in the standard antimicrobial armament. Nanotechnology holds promise as a new approach to combating resistant microbes. Chitosan, a form of deacetylated chitin, has been used extensively in medicine, agriculture and industry due to its ease of pr…
Carrier mobility extraction methods for graphene based on field-effect measurements are explored and compared according to theoretical analysis and experimental results. A group of graphene devices with different channel lengths were fabricated and measured, and carrier mobility is extracted from those electrical tran…
editorial
The factor limiting the application of low-density polyethylene (LDPE) in healthcare is its high susceptibility to bacterial growth. For this reason, we here investigated antibacterial treatments of LDPE foils using appropriate antibacterial agents. Benzalkonium chloride and bronopol were selected because of their sat…
This paper presents the findings of an initial investigation into effects of end tabs and gripping force on specimens for fatigue testing of structural composites. Live measurement of specimen compliance comparing extensometer measurements with grip displacement showed the impact of gripping on the dynamic behavior of…
Spin-current injection into an organic semiconductor κ-(BEDT-TTF)2Cu[N(CN)2]Br film induced by the spin pumping from an yttrium iron garnet (YIG) film. When magnetization dynamics in the YIG film is excited by ferromagnetic or spin-wave resonance, a voltage signal was found to appear in the κ-(BEDT-TTF)2Cu[N(CN)2]Br f…