Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The study discusses the methods of surface modification methods for AISAI 316 L steel and Ti6Al4V ELI titanium alloy, dedicated to complex design implants used in bone surgery. Results of structural tests have been presented along with those evaluating the physicochemical properties of the formed surface layers. Clini…
The aim of this study was to analyse and to identify the phases which formed in 100CrMnSi6-4 bearing steel after the nanostructuring heat treatment. Especially designed thermal treatment parameters were applied in order to obtain a nanobainitic structure. Two different microscopic techniques were used for the precise…
The purpose of this paper is to present the innovative design of microwave plasma system for modification of detonation nanodiamond particles (DNP) using a special rotating drum placed inside the reactor. Nanodiamond particles manufactured by detonation method reveal the biological activity depending on surface functi…
Today low-alloy steels with boron achieve high resistance to abrasive wear and high strength. These features are obtained by using advanced technology of manufacturing. This makes boron steels increasingly popular and their application more diverse. Application of these steels can extend the lifetime of very expensive…
The innovative extracorporeal heart support device ReligaHeart (RH EXT) has been developed, based on POLVAD ventricular assist device clinical experience, collected in more than 300 patient applications. The innovative surface engineering technologies are applied in ReligaHeart EXT device. The pump is manufactured of…
The aim of this work was to determine the nature of the structural defects that have a major influence on the magnetisation process within the investigated alloys. The structure of the alloys in the as-quenched state was investigated by means of X-ray diffractometry. It was confirmed that the samples were amorphous. T…
Currently we can observe a worldwide trend to find new materials with extraordinary properties. In particular these researches are aimed to find a method to improve electrical conductivity, mechanical properties, corrosion resistance and rheological behavior of known materials. This effect can be achieved by a synthes…
The paper presents the deformation and fracture analysis of coating-substrate systems during spherical indentation. CrN and TiN ceramic coatings with a thickness of 1-5 μm were tested using 10 to 200 μm tip radius spherical indenters. The typical results of indentation tests i.e. force-penetration depth curves were tr…
Dealing with robot calibration the neglection of joint and drive flexibilities limit the achievable positioning accuracy significantly. This problem is addressed in this paper. A two stage procedure is presented where elastic deflections are considered for the calculation of the geometric parameters. In the first stag…
The mechanical properties and numerical model of ceramic alumina open-cell foam, which is produced by the chemical method of gelcasting with different cell sizes (porosities) are presented. Geometric characteristics of real foam samples were estimated from tomographic and scanning electron microscopy images. Using thi…
This paper describes the welding technology applied for mixed joints of tubes made of austenitic steels in the X10NiCrAlTi32-21 and X6CrNiMoTi17-12-2 grades. One made a butt joint and a multi-run joint, with the inert gas welding method and a non-consumable electrode. The mechanical properties were tested in the follo…
The aim of this work was to observe the changes in the magnetomechanical properties of composite materials with different Tb0.3Dy0.7Fe1.9 (Terfenol-D) powder particle-size distributions and varying volume fractions in the polyurethane matrix. The results show a direct relationship between the properties and the partic…
The research material used in the study was the martensitic creep-resistant steel P92 used for the manufacture of pipes being part of power generation units subject to heavy load. The research problem focused on two issues. The first one was to analyze how the plastic deformation cumulated in the material in low-cycle…
Abstract Microstructure and texture development in medium-to-high stacking fault energy face centred cubic metals were investigated in order to examine the role of lattice re-orientation on slip propagation across grain boundaries and to characterize the influence of micro- and macro-scale copper-type shear bands on t…
Metallographic examinations and mechanical tests were carried out on the ductile iron with additions of Ni, Cu and Mo in as-cast state and after austempering. TTT and CCT diagrams were plotted. The heat treatment was performed in six different variants. Studies included qualitative assessment of the microstructure and…
This experimental study deals with the flexural behaviors of composite single-lap adhesive joints after impact tests. Increasing impact energies are applied at the center of the composite plates having three different overlap lengths. It is shown that the overlap lengths and impact energy levels affect considerably th…
Spiral coil offers a substantial amount of heat transfer area at a considerably low cost as it does not only have a lower wall resistance but it also achieves a better heat transfer rate in comparison to conventional U-tube arrangement. The general aim of the study is to assess different configurations of spiral coil…
This paper presents the application of artificial neural networks for prediction contact resistance of front metallization for silicon solar cells. The influence of the obtained front electrode features on electrical properties of solar cells was estimated. The front electrode of photovoltaic cells was deposited using…
The article presents the results of residual stress analysis in selected metal-metal joints manufactured by conventional welding and explosive merging. The X-ray diffraction technique applied for advanced stress-texture measurements and data processing revealed directions and values of the principal stresses and their…
This work presents the results of diffraction analyses carried out using X-ray phase analyses (XRD and GIXRD) of nitrided layers of X2CrNiMo17-12-2 austenitic steel. Plasma nitriding process was c arried out in the temperature range of 325 ÷ 400 °C and time of 2 ÷ 4 h. Hydrogen-nitrogen plasma was used as reactive atm…