A. Basak、A.J. Moses1978-01-01Proceedings of the Institution of Electrical Engineers
The stress sensitivity of rotational-power loss in silicon iron has been investigated. The loss increases with tensile stress applied parallel to the rolling direction and decreases with compression. The opposite occurs when the stress is applied perpendicular to the rolling direction. The loss varies in a similar fas…
Microstructure and Mechanical Properties of SteelsMagnetic Properties and ApplicationsElectromagnetic Effects on Materials
S. Enomoto、Hitoshi NISHIDA、Hisauki Wada 等 5 位作者1978-01-01Journal of Applied Polymer Science
The conventional air-dried alkyd resin is generally used with 30% to 40% of some organic solvent which dissipates into atmosphere after painting and becomes a factor of air pollution. A reactive diluent was investigated to reduce the content of the organic solvent and to manufacture a high-solid or superhigh-solid pai…
Polymer composites and self-healingSynthesis and properties of polymersSilicone and Siloxane Chemistry
Shigeo Nomura、Masayoshi Hasegawa1978-01-01鐵と鋼 : 日本鐡鋼協會々誌
The damage of austenitic stainless steels heated at high temperature and high pressures of hydrogen was investigated with reference to the metallurgical factors. Main results obtained are as follows:1) The solubility of hydrogen (wtppm) in 304 steel hydrogenated at T: 473-723 (K) under P: 10-300 (atm) is given by the…
Fatigue and fracture mechanicsHydrogen embrittlement and corrosion behaviors in metalsMaterial Properties and Failure Mechanisms
Katsuhisa Matsuura、M. Kitamura、Katsuya Watanabe1978-01-01Transactions of the Japan Institute of Metals
The yield stress and work-hardening of copper base-iron alloy single crystals, which contained coherent γ-iron particles, were examined over a wide range of particle sizes to clarify the hardening mechanism by the γ-iron particles.The yield stress and the extent of the easy glide region in the stress-strain curves inc…
Microstructure and mechanical propertiesMicrostructure and Mechanical Properties of SteelsHigh Temperature Alloys and Creep
RP Gangloff、RP Wei1978-01-01OpenAlex
Fracture surfaces, produced by sustained load gaseous hydrogen assisted cracking of 18Ni maraging steel, were examined by scanning electron microscopy. Cracking developed along boundaries associated with the maraging steel microstructure. The specific crack path depended on test temperature and correlated with the inf…
Microstructure and Mechanical Properties of SteelsHydrogen embrittlement and corrosion behaviors in metalsMaterial Properties and Failure Mechanisms
David L. Kepert、J. Kyle1978-01-01Journal of the Chemical Society Dalton Transactions
The reaction of [PW12O40]3–, [BW12O40]5–, and [H2W12O40]6–(1.5 × 10–5 mol dm–3) with excess of hydroxrde ion at an ionic strength of 1.0 mol dm–3 MCI (M = K, Na, or Li). to form [WO4]2–, phosphate, and borate, has been studied. The rate, and in some instances the mechanism, of the reactions is dependent on the cation…
Metal-Organic Frameworks: Synthesis and ApplicationsPolyoxometalates: Synthesis and ApplicationsChemical Synthesis and Characterization
C. Goldbach、G. Nollez、S. Popović 等 4 位作者1978-01-01Zeitschrift für Naturforschung A
In order to investigate some properties of a medium with a low number of particles in a Debye sphere, the electrical conductivity of high-pressure ionized Argon has been measured. A special emphasis is laid on the so-called "non-ideality" effects in the collective behaviour of charged particles. A kind of threshold fo…
Cold Atom Physics and Bose-Einstein CondensatesMaterial Dynamics and PropertiesAdvanced Thermodynamics and Statistical Mechanics
P. Varotsos1978-01-01Journal de Physique Lettres
It is shown that in alkali halides the increase of the static dielectric constant ε with temperature is exclusively due to anharmonic effects. A simple formula is given which permits the calculation of ε at any temperature if we know : (i) the dielectric constant at room temperature and (ii) the thermal variation of b…
Ferroelectric and Piezoelectric MaterialsHigh-pressure geophysics and materialsSolid-state spectroscopy and crystallography
S. Bose、Hans Jürgen Grabke1978-01-01International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)
Article Diffusion Coefficient of Carbon in Fe-Ni Austenite in the Temperature Range 950 — 1100° C was published on January 1, 1978 in the journal International Journal of Materials Research (volume 69, issue 1).
Metal Alloys Wear and PropertiesMaterial Properties and ApplicationsMaterial Properties and Failure Mechanisms
Robert N. Hanley、W. David Ollis、Christopher A. Ramsden 等 5 位作者1978-01-01Journal of the Chemical Society Perkin Transactions 1
The electric dipole moments of derivatives of fourteen classes of mesoionic compounds have been measured. Vector analysis gives heterocyclic ring moments whose magnitude and direction provide support for the mesoionic formulations.
Synthesis and Properties of Aromatic CompoundsInorganic and Organometallic ChemistrySynthesis and properties of polymers
Z. Surowiak、J. Dec、R. Skulski 等 6 位作者1978-01-01Ferroelectrics
The connection between the phase transition conditions and the domain structure of BaTiO3 and PbTiO3 crystals is determined.
Ferroelectric and Piezoelectric Materials
Jun Hatano、Fujio Suda、Hideo Futama1978-01-01Ferroelectrics
Wall-energy density as a function of wall orientation has been calculated on the basis of Zhirnov-type domain-wall theory. The equilibrium wall-orientations and the domain shapes which are consistent with the experimental observations have been successfully brought about for TGS and TGSe crystals. Two preferential ori…
Acoustic Wave Resonator TechnologiesSolid-state spectroscopy and crystallographyInorganic Fluorides and Related Compounds
Katsumi Ura、Hiromu FUJIOKA、Teruo Hosokawa1978-01-01Journal of Electron Microscopy
The stroboscopic SEM has been developed to observe the two-dimensional dynamic voltage contrast images of semiconductor devices in the nanosecond and picosecond regions. It consists of a usual SEM and a pulse gate which is inserted between the electron gun and the condenser lens. The shortest beam pulse width is 0.2 p…
Advanced Electron Microscopy Techniques and ApplicationsElectron and X-Ray Spectroscopy TechniquesIntegrated Circuits and Semiconductor Failure Analysis
Yoshio Kikuta、Takeshi Araki、T. Kuroda1978-01-01OpenAlex
The relationships between fracture morphology of hydrogen-assisted cracking, microstructure, and crystallographic orientation were investigated using the scanning electron microscope. In the fracture morphology of hydrogen-assisted cracking, quasicleavage fracture, intergranular fracture, and dimple rupture were obser…
Hydrogen embrittlement and corrosion behaviors in metalsEngineering Diagnostics and ReliabilityMaterial Properties and Failure Mechanisms
A. M. Glazer1978-01-01Physics Bulletin
M F C Ladd and R A Palmer New York: Plenum 1977 pp xvi + 393 price $35.40 For several years the University of Surrey and Birkbeck College, London, have been running teaching courses in crystallography. Therefore a book written by Ladd (Surrey) and Palmer (Birkbeck), who have both been intimately involved in these cour…
Enzyme Structure and FunctionCultural Heritage Materials AnalysisX-ray Diffraction in Crystallography
Colin H. Rochester、Deborah-Anne Trebilco1978-01-01Journal of the Chemical Society Faraday Transactions 1 Physical Chemistry in Condensed Phases
Infrared spectra have been reported of silica immersed in solutions of anisole, six substituted anisoles (4-nitro, 4-chloro, 4-bromo, 4-methyl, 2-fluoro and 2,6-dimethyl), nitrobenzene and 4-nitrotoluene in heptane. Surface silanol groups were perturbed by hydrogen bonding interactions with either methoxy-groups or th…
Mesoporous Materials and CatalysisInorganic and Organometallic ChemistryChemical Synthesis and Reactions
J. Dutkiewicz1978-01-01Metals Technology
Phase transformations in quenched, deformed, and aged copper-titanium alloys containing up to 5,6 at.-% Ti were studied by means of hardness measurements and electron microscope examinations of thin foils. The modulation wavelength showed a linear relationship with the logarithm of the aging time. Deformation caused a…
Microstructure and mechanical propertiesMagnesium Alloys: Properties and ApplicationsAluminum Alloy Microstructure Properties
M. R. Mackley1978-01-01Physics in Technology
Recent developments in the physical understanding and the achievement of high chain extension in polymeric material which could lead to significant advances in existing and new areas of polymer processing technology are described. Solid-state deformation and melt and solution orientation are outlined
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesRheology and Fluid Dynamics Studies
Manfred Helbig、Hiro Inoue、Otto Vogl1978-01-01Journal of Polymer Science Polymer Symposia
Abstract Head‐to‐head poly(vinyl cyclohexane) (H‐H PVCH) was prepared from 2,3‐diphenylbutadiene, which was polymerized by radical, 1,4 polymerization to poly(2,3‐diphenylbutadiene) and then catalytically hydrogenated to H‐H PVCH, H‐H PVCH was also prepared by catalytic hydrogenation of H‐H polystyrene (PS). The catal…
Polymer Nanocomposites and PropertiesOrthopaedic implants and arthroplastyThermal and Kinetic Analysis
Shuichi Miyazaki、Hiroshi Fujita1978-01-01Transactions of the Japan Institute of Metals
Mechanical properties of polycrystalline copper and Cu-13 at%Al alloy have been investigated as a function of grain size and specimen thickness at room temperature, with the following results: (1) The flow stress of both copper and Cu-13 at%Al alloy decreases as the ratio of specimen thickness to grain size decreases…
Microstructure and mechanical propertiesAluminum Alloy Microstructure PropertiesAluminum Alloys Composites Properties