Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 150788 / 152346 页 · 当前展示 3,015,741–3,015,760 / 3,046,905 条匹配结果 · 摘要仅作预览

Polyether‐based thermoplastic polyurethanes. I. Effect of the hard‐segment content

Richard J. Zdrahala、R.M. Gerkin、S.L. Hager 等 4 位作者1979-11-01Journal of Applied Polymer Science

Abstract A series of Polyether‐based thermoplastic polyurethanes, varying in hard‐segment content between 20 and 80 wt. %, was prepared using an (oxypropylene‐oxyethylene) diol of M n = 2000 as the soft segment and 4,4′‐diphenylmethane diisocyanate extended with 1,4‐butanediol as the hard segment. Physical‐mechanical,…

Polymer Nanocomposites and PropertiesPolymer composites and self-healingFlame retardant materials and properties

Single-crystal structures and electron density distributions of ethane, ethylene and acetylene. II. Single-crystal X-ray structure determination of acetylene at 141 K

G. J. H. van Nes、F. VAN BOLHUIS1979-11-01Acta Crystallographica Section B

Crystalline acetylene at 141 K is cubic, a = 6.091 (3) /~, space group Pa3, Z = 4. The intensities of all 164 independent reflexions up to sin 0/2 = 0.80 A -1 were measured accurately on a Nonius four-circle diffractometer. For higher sin 0/2, very few significant reflexion intensities exist due to the strong thermal…

Advanced Chemical Physics StudiesX-ray Spectroscopy and Fluorescence AnalysisX-ray Diffraction in Crystallography

Low-temperature helium release in nickel

G.J. Thomas、W.A. Swansiger、M. I. Baskes1979-11-01Journal of Applied Physics

Measurements of 3He released by thermal desorption have been made in high-purity annealed, cold-worked, and single-crystal nickel samples. The 3He was introduced by natural tritium decay to eliminate implantation produced defects. Release was observed in the temperature region from ∼100 to 300 K and above 800 K; no de…

Fusion materials and technologiesNuclear Materials and PropertiesNuclear Physics and Applications

Ion radicals. 45. Reactions of zinc tetraphenylporphyrin cation radical perchlorate with nucleophiles

Henry J. Shine、Amphlett G. Padilla、Shiming Wu1979-11-01The Journal of Organic Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTIon radicals. 45. Reactions of zinc tetraphenylporphyrin cation radical perchlorate with nucleophilesHenry J. Shine, A. Gregory Padilla, and Shi-Ming WuCite this: J. Org. Chem. 1979, 44, 23, 4069–4075Publication Date (Print):November 1, 1979Publication History Published onli…

Molecular Sensors and Ion DetectionPorphyrin and Phthalocyanine ChemistryChemical Analysis and Environmental Impact

Clinical toxicologic and pharmacologic studies of gallium nitrate

Irwin H. Krakoff、Robert A. Newman、Ronald S. Goldberg1979-11-01Cancer

Gallium nitrate, administered intravenously to patients with advanced cancer, produced renal functional abnormalities consistently at a dose of 750 mg/m2. The toxicity at that dose could be modified by fluid loading and osmotic diuresis. Pharmacokinetic studies revealed a biphasic half-life, (T 1/2 alpha = 87 minutes…

Molecular Sensors and Ion DetectionAntibiotics Pharmacokinetics and EfficacyLanthanide and Transition Metal Complexes

The staining pattern of collagen fibrils. Improved correlation with sequence data.

Keith M. Meek、John Chapman、R.A. Hardcastle1979-11-01Journal of Biological Chemistry

The periodic banding pattern of stained collagen fibrils observed in the electron microscopic can be correlated with the charge distribution deduced from the amino acid sequence. Earlier work used alpha 1 chain sequence data only. The present study incorporates alpha 2 as well as alpha 1 sequence data, so that the com…

Collagen: Extraction and CharacterizationBiological Stains and Phytochemicals

Kinetics and mechanism of the oxidation of sulfide by oxygen: catalysis by homogeneous metal-phthalocyanine complexes

Michael R. Hoffmann、Brian C. Lim1979-11-01Environmental Science & Technology

The kinetics of the catalyzed autoxidation of hydrogen sulfide to sulfur, thiosulfate, and sulfate in aqueous solution has been investigated potentiometrically over the pH range 5-12. The catalytic effects of cobalt(II), nickel(II), and copper(I1) 4,4’,4”,4”'- tetrasulfophthalocyanine have been determined, and differe…

Porphyrin and Phthalocyanine ChemistryElectrochemical Analysis and ApplicationsInorganic and Organometallic Chemistry

ON THRESHOLDS FOR SURFACE WAVES ON RESONANT BUBBLES

Radoslav Nabergoj、Alberto Francescutto1979-11-01Le Journal de Physique Colloques

Abstract.- The problem of the stability of gas bubbles in a sound field has been investigated using a model for the motion of a nearly spherical bubble in a slightly viscous liquid. The radial motion amplitude and the pressure amplitude thresholds for the instability of the spherical shape have been obtained by the th…

Methane Hydrates and Related PhenomenaUnderwater Acoustics ResearchUltrasound and Cavitation Phenomena

Relation between the Thermal Expansion Coefficient and the Magnetization in Fe-Ni Invar Alloys

Fumihisa Ono1979-11-01Journal of the Physical Society of Japan

Measurements of magnetization curves for Fe-Ni Invar alloys have been made at various temperatures between room temperatures and about 450°C. Specimens used were in a sphere shape, which were obtained from the same ingots that the specimens used for the thermal expansion measurements had been taken from. By comparing…

Electric Motor Design and AnalysisMagnetic Properties and ApplicationsInduction Heating and Inverter Technology

The Nature of CaO Produced by Calcite Powder Decomposition in Vacuum and in CO 2

Jay D. Ewing、D. Beruto、Alan W. Searcy1979-11-01Journal of the American Ceramic Society

Specially reactive (sr‐) CaO can be produced by decomposing 1‐ to 10‐μm particles of CaCO 3 in vacuum at ∼650°C. Particles of sr‐CaO appear unchanged in dimension from the original CaCO 3 , but have internal pores with surface areas of 92 m 2 /g, more than twice the surface areas reported in a previous study for CaO m…

Advanced ceramic materials synthesisRecycling and utilization of industrial and municipal waste in materials productionAdvanced materials and composites

Reinforcement of Uncured and Cured Rubber Composites and Its Relationship to Dispersive Mixing—An Interpretation of Cure Meter Rheographs of Carbon Black Loaded SBR and Cis-Polybutadiene Compounds

Bung‐Lin Lee1979-11-01Rubber Chemistry and Technology

Abstract A new approach has been proposed to characterize the state of mixing of carbon black-loaded SBR and cis -polybutadiene compounds. The basic concept is that carbon black aggregates, present when the dispersion is imperfect, affect the modulus of the uncured compound more than that of the cured compound. From c…

Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesNatural Fiber Reinforced Composites

Effects of applied stress on the magnetic properties of high permeability silicon-iron

A.J. Moses1979-11-01IEEE Transactions on Magnetics

It is well known that magnetic properties of Goss-oriented silicon-iron are dependent upon external mechanical stress. This paper describes some of the recent work carried out in the UK on the effects of high compressive stress, combined longitudinal and transverse stresses, and also the effects of elevated temperatur…

Magnetic properties of thin filmsElectric Motor Design and AnalysisMagnetic Properties and Applications

X-ray study of (NH4)7[H2AsW18O60].16H2O: first example of a heteropolyanion containing protons and arsenic(III)

Yves Jeannin、J. Martin‐Frere1979-11-01Inorganic Chemistry

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTX-ray study of (NH4)7[H2AsW18O60].16H2O: first example of a heteropolyanion containing protons and arsenic(III)Y. Jeannin and J. Martin-FrereCite this: Inorg. Chem. 1979, 18, 11, 3010–3014Publication Date (Print):November 1, 1979Publication History Published online1 May 2002…

Metal-Organic Frameworks: Synthesis and ApplicationsMetal complexes synthesis and propertiesPolyoxometalates: Synthesis and Applications

The modulus of the amorphous component in polyethylenes

Richard H. Boyd1979-11-01Polymer Engineering and Science

Abstract Various approaches to representing the modulus of a semicrystalline polymer as a composite crystal‐amorphous material are applied to the extensive data of Illers on the shear modulus of linear and branched polyethylenes as a function of crystallinity and temperature. It is found that the modulus of linear pol…

Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesComposite Material Mechanics

Normal and superconducting properties ofCsxWO3

M. R. Skokan、W. G. Moulton、R. C. Morris1979-11-01Physical review. B, Condensed matter

The resistivity, Seebeck coefficient, superconducting transition temperature, and upper critical field have been measured in ${\mathrm{Cs}}_{x}\mathrm{W}{\mathrm{O}}_{3}$ for $0.19<~x<~0.30$. In contrast to ${\mathrm{Rb}}_{x}\mathrm{W}{\mathrm{O}}_{3}$, no temperature-dependent anomalies were observed in either…

Magnetic and transport properties of perovskites and related materialsTransition Metal Oxide NanomaterialsAdvanced Condensed Matter Physics

On the Mechanism of Pitting of Aluminum

Trung Hung Nguyen、R. T. Foley1979-11-01Journal of The Electrochemical Society

The Engell‐Stolica potentiostatic method has been used for the kinetic study of the mechanism of pitting initiation of Al 1199. A statistical treatment of the induction time has been developed in order to get meaningful data. Pitting initiation time has been found to be potential‐independent and the linear increase in…

Corrosion Behavior and InhibitionConcrete Corrosion and DurabilitySurface and Thin Film Phenomena

Towards an understanding of the heat distortion temperature of thermoplastics

Michael T. Takemori1979-11-01Polymer Engineering and Science

Abstract A systematic understanding of the heat distortion temperature (HDT) of amorphous and semi‐crystalline polymers is possible through a direct correlation with the modulustemperature behavior. For amorphous polymers, the precipitous drop in modulus at the glass transition temperature makes the HDT a well‐defined…

Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesTribology and Wear Analysis

Hydrogen-diffusion-rate-limited hydriding and dehydriding kinetics

P.S. Rudman1979-11-01Journal of Applied Physics

Hydriding and dehydriding kinetics are derived within the framework of the Johnson-Mehl-Avrami equation. Hydriding is considered to be rate limited by hydrogen diffusion through a growing hydride layer, and dehydriding by hydrogen diffusion through a growing metal layer. Incubation time effects due to surface contamin…

Advanced Chemical Physics StudiesHydrogen Storage and MaterialsAmmonia Synthesis and Nitrogen Reduction

Local position ofFe3+in ferroelectric BaTiO3

Edward Siegel、K. A. Müller1979-11-01Physical review. B, Condensed matter

The EPR spectra of ${\mathrm{Fe}}^{3+}$ in the three ferroelectric phases of BaTi${\mathrm{O}}_{3}$ could be interpreted on the basis of the Newman superposition model. In the latter, the position of the nearest (oxygen) ligands determines the EPR spectrum. It is found that the ${\mathrm{Fe}}^{3+}$ participates by les…

Ferroelectric and Piezoelectric MaterialsCrystal Structures and PropertiesSolid-state spectroscopy and crystallography

Substituent effects on strain energies

James D. Dill、Arthur Greenberg、Joel F. Liebman1979-11-01Journal of the American Chemical Society

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTSubstituent effects on strain energiesJames D. Dill, Arthur Greenberg, and Joel F. LiebmanCite this: J. Am. Chem. Soc. 1979, 101, 23, 6814–6826Publication Date (Print):November 1, 1979Publication History Published online1 May 2002Published inissue 1 November 1979https://pubs…

Synthesis and characterization of novel inorganic/organometallic compoundsBoron and Carbon Nanomaterials Research