Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Nanocrystalline powder of tripotassium sodium sulfate (K3Na(SO4)2 - KNS) was successfully obtained by mechanical alloying a mixture of potassium sulfate (K2SO4) and sodium sulfate (Na2SO4) with a proportion of 3:1 in a planetary mill. X ray powder diffraction (XRPD) was used to characterize this material. Powders prod…
Rare earths have been used to increase high temperature oxidation resistance of many chromium dioxide and alumina forming alloys. These rare earths can be added as elements (or as oxide dispersions) to the alloys or applied as an oxide coating to the alloy surface. The sol-gel technique is considered to be very effici…
Al2O3 and H3PO4/Al2O3 catalysts were investigated in the conversion of oleic acid to biofuels and biolubricant at 1 atm and at 623 K. The catalytic tests were performed in a fixed bed and continuous flow reactor, using an oleic acid-catalyst ratio of 4 and N2 as the carrier gas. The reaction products were analyzed by…
The present article describes a study conducted to determinethe ideal composition of both traditional and stabilizedadobe as a construction material. The clay soil of avillage in Villa Clara, Cuba, was characterized for its suitabilityto build several adobe structures for a facility forpre-schoolers. Consolidation, si…
Abstract The rheological behaviour of PVC plastisols composed of a blend of suspension and micro-suspension resins in different proportions was investigated. The present work was mainly focused on the variation of the zero shear viscosity versus the concentration of the extender resin. Hence, the packing fraction F m…
The purpose of this study was to compare the effect of casting temperature and atmosphere on the castability of three Ni-Cr alloys against direct flame casting method. Vera Bond (VB), Vera Bond 2 (VB2) and Wiron 99 (W99) were cast at three temperatures: VB and VB2 (1310 °C, 1340 °C and 1370 °C); W99 (1400 °C, 1430 °C…
The present article describes the findings of the first stageof the analysis of xiloarcilla, a material made of clayand a wood industry by-product, namely the wood andpolyurethane varnish powder pump-suctioned off woodcomponents during sanding and polishing. This powderwas added to the clay in proportions of from 1% t…
Electrochemical response of ferri/ferrocyanide redox couple is discussed for a system that uses reticulated vitreous carbon (RVC) three dimensional electrodes prepared at five different Heat Treatment Temperatures (HTT) in the range of 700 °C to 1100 °C. Electrical resistivity, scanning electron microscopy and X ray D…
Liquid crystalline polymer (LCP) and polyethylene terephthalate (PET) were blended in an elastic melt extruder to make samples having different volume fractions of constituent polymers. Shear stress, shear viscosity, first normal stress difference at different shear rates under steady state conditions of these blends…
In this work we investigate the rheological behaviour of macroscopic buoyant hard spheres dispersed in a shear-thinning suspending fluid. We focus on the phenomenological study of the influence of the shear-thinning behaviour of the suspending medium on the effective apparent suspension viscosity at different volume f…
One highly relevant aspect in composite material bridgedesing is the study of the shear connectors to be used.Composite material bridges most commonly comprise acomposite deck resting on steel or reinforced concrete girders.This article analyzes the connectors most frequentlyused in such bridges. It also reviews the c…