Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Manganese substituted cobalt ferrite, Co1−xMnxFe2O4 (x = 0.0–0.4), was prepared by a ceramic method. The heat-treated powders were pressed at hydrostatic pressure of 167 MPa, and were annealed at 1350 °C for 24 h. These samples present a single-phase cubic spinel structure and the compositional mass ratios are close t…
Abstract This paper investigates thermally activated healing in an epoxy amine network using six thermoplastic modifiers; ethylene vinyl acetate (EVA), poly (ethylene‐ co ‐glycidyl)‐methacrylate (PEGMA), poly(vinyl‐butyral) (PVB), styrene‐ethylene‐butadiene copolymer (SEBS), acrylonitrile‐butadiene‐styrene (ABS) and p…
Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites contai…
Semi-insulating layers (SIL) were formed on the surfaces of nominally undoped β-Ga 2 O 3 (010) single crystals by thermal oxidation. Capacitance–voltage measurement with double Schottky configuration was performed to evaluate the increase in the thickness of the SIL as a function of annealing temperature and time. A S…
Through numerical simulation, we predict the existence of the Fano interference effect in the electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) of symmetry-broken nanorod dimers that are heterogeneous in material composition and asymmetric in length. The differing selection rules of the electron pr…
We employ atomistic molecular dynamics simulations to predict the alignment and anchoring strength of a typical nematic liquid crystal, 4-n-pentyl-4'-cyano biphenyl (5CB), on different forms of silica. In particular, we study a thin (~20 nm) film of 5CB supported on surfaces of crystalline (cristobalite) and amorphous…
Understanding the interfacial stress transfer between carbon nanotubes (CNTs) and polymer matrices is of great importance to the development of CNT-reinforced polymer nanocomposites. In this paper, an experimental study is presented of the interfacial strength between individual double-walled CNTs and poly(methyl meth…
Gold nanorods used in therapy and diagnosis must be nontoxic and stable in biological media and should be specific for the target. The complete combination of these three factors has hindered the use of gold nanorods as carriers in biological and biomedical applications. In this study, we produced a conjugate of gold…
We show that the first order magneto-structural phase transitions observed in various classes of magnetic solids are often accompanied by useful multi-functional properties, namely giant magneto-resistance, magneto-caloric effect and magneto-striction. We highlight various characteristic features associated with a dis…
Magnesium oxide (MgO) was synthesized by ultrasound assisted sol-gel method. The synthesized samples were characterized by various analytical techniques including X-Ray diffraction (XRD), field emission scanning electron microscopy (FESEM), SEM with (energy dispersive X-ray analysis) EDX, Fourier transform infrared sp…
We present a careful study of the resistive superconducting transition in FeSe single crystals down to $T=40$ mK in continuous magnetic fields up to 30 T applied perpendicular and parallel to the $ab$ plane. In the $\mathbf{H}\ensuremath{\parallel}\mathbf{c}$ geometry the temperature dependence of the resistive upper…
Nanosized drug carriers functionalized with moieties specifically targeting tumor cells are promising tools in cancer therapy, due to their ability to circulate in the bloodstream for longer periods and their selectivity for tumor cells, enabling the sparing of healthy tissues. Because of its biocompatibility, high bi…
Doxorubicin-loaded chitosan-coated superparamagnetic iron oxide nanoparticles (Fe3 O4 ; SPIO-NPs) were prepared by coprecipitation and emulsification cross-linking method and uniform NPs with an average particle size of 82 nm, with high encapsulation efficiencies, were obtained. The drug-loading efficiency of doxorubi…
We report an approach to deliver DNA to vascular tissue in vivo using intravascular stents coated with degradable, DNA-containing polyelectrolyte multilayers (PEMs). Ionically cross-linked multilayers ∼120 nm thick were fabricated layer-by-layer on the surfaces of balloon-mounted stainless steel stents using plasmid D…
The influence of clay-layer spacing on gas barrier thin films of sodium montmorillonite clay and polyelectrolytes, created via layer-by-layer assembly, is investigated. The alternate deposition of polymers and clay leads to the assembly of a nanobrick wall structure that is highly impermeable to gases. In an effort to…
The use of different polymers as both reducing agent and stabilizers has gained wide attention for its simplicity and impressive efficiency when being applied to synthesis noble metal nanoparticles. This article concludes reports published recently on specific polymers used to reduce metal precursors and protect metal…
Polyamide-6-based composites with pristine or functionalized multi-walled carbon nanotubes were produced using melt extrusion technique. After chemical functionalization, defect formation and attachment of carboxylic (−COOH) or amine (−NH 2 ) groups on carbon nanotubes was confirmed from high-resolution transmission e…
We present the application of a theranostic system combining Raman imaging and the photodynamic therapy (PDT) effect. The theranostic nanoplatform was created by loading the photosensitizer, protoporphyrin IX, onto a Raman-labeled gold nanostar. A cell-penetrating peptide, TAT, enhanced intracellular accumulation of t…
We have studied nucleation and crystal growth of calcium carbonate on hard surfaces, i.e. stainless steel and silica, at different temperatures, in relation to the corresponding bulk processes, using scanning electron microscopy (SEM), X-ray diffraction (XRD), and ellipsometry. In the bulk solution, a mixture of all t…
Manganese oxides (MnO x ) supported on Ce 0.9 Zr 0.1 O 2 (MnO x /Ce 0.9 Zr 0.1 O 2 ) nanorods were synthesized and tested for low-temperature selective catalytic reduction of NO with ammonia. The catalysts were characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction,…