Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Zinc oxide (ZnO) is regarded as a promising material for optoelectronic devices, due to its electronic properties. Solely, the difficulty in obtaining p-type ZnO impedes further progress. In this connection, the identification and quantification of impurities is a major demand. For quantitative information using secon…
Ring compression tests were conducted with specimens sampled from high-burnup PWR and BWR fuel cladding segments that had been ruptured, oxidized at 1,405–1,484 K, and quenched in LOCAsimulated experiments. The calculated oxidation amount for cladding thickness ranged from 11.3 to 25.3% and the hydrogen concentration…
In Al-Si-C system, there are many compounds, of which Al 4 SiC 4 is useful as high-temperature structure material and the antioxidant in carbon-containing refractory. In this paper, Al 4 SiC 4 powders were synthesized by using kaolin grog, aluminum and activated carbon as raw materials. The phase changes of the synthe…
This paper studies the effect of longitudinal magnetic field on ultrasonic vibration in single walled carbon nanotubes (CNTs) based on nonlocal continuum medium theory. Governing partial differential equations of CNTs are derived by considering the Lorentz magnetic forces applied on CNTs induced by a longitudinal magn…
Chitosan films are prepared from solutions containing benzoic acid. Depending on preparation conditions, films of two types can be prepared: homogeneous optically transparent films and biphasic films containing fractal inclusions in a transparent matrix. The presence of ionic interaction between chitosan and benzoic a…
Optical and electronic properties of Zn 1−x Mg x O ternary alloys of wurtzite structure are calculated by using first-principles based on the framework of generalized gradient approximation to density functional theory with the introduction of the on-site Coulomb interaction. The use of the U parameter on Zn-3d and O-…
Sheet type specimens of type 316 stainless steel covered by Cr oxide layers were exposed to tritium gas at 300 °C together with the specimens covered by Fe-rich oxide layers and pure Fe specimens to compare tritium behaviors in oxide films with different Cr contents. Tritium concentration in the oxide layers decreased…
Yttrium vanadate phosphors co-doped with Bi3+ and Yb3+ ions have been prepared via the solid-state reaction. The phosphors were characterized by various methods including X-ray diffraction, photoluminescence excitation and photoluminescence spectra. Upon ultraviolet (UV) light excitation, an intense near-infrared (NIR…
In this paper, the electric and the magnetic dipole couplings between the outer and the inner rings of a single split ring resonator (SRR) are investigated. We numerically demonstrate that the magnetic resonance frequency can be substantially modified by changing the couplings of the electric and magnetic dipoles, and…
Polydichlorophosphazenes (PDCP) were synthesized through ring opening polymerization of hexachlorocyclotriphosphazene (HCCP). The polymerization behavior of HCCP under varying conditions of time and amount of catalyst was investigated. The chlorine atoms in polydichlorophosphazenes (PDCP) were substituted with p-oxybe…
Hybrid-particle-element methods developed for woven fabric impact modeling offer a new computational approach to fabric barrier design. Simulations performed using this technique have shown good agreement with small fragment impact experiments, and they capture the complex multilayer fabric dynamics observed in high-s…
The effect of an acoustically driven bubble on the acoustics of a liquid-filled pipe is theoretically analyzed and the dimensionless groups of the problem are identified. The different regimes of bubble volume oscillations are predicted theoretically with these dimensionless groups. Three main regimes can be identifie…
Biodegradable stent is considered as an innovative approach to treat coronary artery occlusion. It is expected to provide scaffolding function during the healing period and progressively disappear thereafter leaving no foreign remnant in the vessel. Progress on biodegradable stents depends on the development of their…
The adsorption properties of the original TiO2, MgO, and SiO2 surfaces and those modified with nanoscale gold and nickel particles are studied using the dynamic sorption in a range of low coverages. N-alkanes (C6–C9) and adsorbate molecules with different donor and acceptor properties were taken as the reference compo…
The effects of excess (up to 0.1 at %) Te atoms and heat treatment at 473 and 573 K for 120 h on the conductivity σ, thermopower α, and Hall coefficient R of PbTe single crystals are studied. It is shown that excess Te atoms and annealing strongly affect the values and character of the temperature dependences of these…
Electrospinning is a popular technique for producing micro-or nanofibers for diverse applications including filtration, catalysis, sensors, cosmetics, wound dressing and tissue engineering. In some applications such as controlled drug/biomolecule delivery, core-shell structured nanofibers are desired. There are two ma…
The GIR1 branching ribozyme constitutes a separate class of naturally occurring ribozymes. Most studies have been performed with the single GIR1 known from the myxomycete Didymium iridis whereas the large number of GIR1s found in the amoeboflagellate Naegleria has remained largely uncharacterized. Here, we investigate…
In this study, doxorubicin (DOX)-loaded long circulating liposomes combined with curcumin (CUR) (DOX-CUR-LCLs) were successfully prepared as a novel formulation for cancer treatment. The particle size and distribution, zeta potential, drug loading capacity, and entrapment efficiency (EE) of the preparation were charac…
Herein, we present a straightforward method to achieve optically active films based on porphyrin derivatives. The introduction of an aminoacid functionality on the porphyrin platform confers to the macrocycle both the amphiphilic and chiral character exploited for its solvent-promoted self-aggregation leading to the f…
The specific heat capacity of gallium nitride (GaN) was measured for polycrystalline powder and single crystal samples. We present the temperature dependence of the specific heat capacity for single crystal and powdered GaN from 100 to 1300 K. The difference between the polycrystalline powder and single crystal arises…