Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
First, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and epoxy resin (E-51) were employed to synthesize a structural non-halogenated epoxy resin (ED). And a novelphenolic aldehyde curing agent, 2,4,6-tri (phenol-methylene-amide)-triazine (MFP) was also synthesized for preparing high-performance MFP/ED comp…
The surface enthalpies of manganese oxide phases, hausmannite (Mn 3 O 4 ), bixbyite (Mn 2 O 3 ), and pyrolusite (MnO 2 ), were determined using high-temperature oxide melt solution calorimetry in conjunction with water adsorption calorimetry. The energy for the hydrous surface of Mn 3 O 4 is 0.96 ± 0.08 J/m 2 , of Mn…
A partial discharge (PD) sensor based on two-arm equiangular spiral antenna is designed and optimized in this research, and key parameters which mainly influence the performance of sensor are optimized. Through simulation and contrastive study, the key parameters' values are confirmed, which improves the sensor's perf…
Measurements of the viscosity of non-Newtonian fluids and suspensions having a solid volume fraction of about 30% or more is of major interest from an industrial point of view. Cement paste and cement grouts for injection grouting applications, with water to cement ratios typically in the range of 0.4 and 0.6 - 0.8 by…
In-vitro small intestinal flow characteristics of a shear thinning fluid are investigated by transient ‘2-wave’- squeezing of an elastic tube under different speeds of peristalsis. Such peristaltic flow is the essential physiological transport mechanism in the gastro-intestinal tract. The peristalsis involves both exp…
Bamboo is an alternative sustainable material for use in product design and has been incorporated into the concepts of eco-design. Here, we investigated the mechanical properties and morphologies of low density polyethylene (LDPE)/bamboo flour (BF) composites that were modified with polyethylene-graft-maleic anhydride…
The retentions of Zn, Cd and Pb cations by one treated bentonite up to 750 °C were analyzed. The retentions were evaluated by using mono-and poly-solute aqueous solutions of such cations. The adsorptions were carried out in batch system at room temperature. The solid/liquid ratio was 2% wt.v-1. The solids were charact…
The effect of grinded glass and sisal fibers (25 vol%) on the cure kinetics of composites of unsaturated polyester resin (UPR) was investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The DSC analysis was carried out at four different heating rates (5, 10, 20 and 40 °C/min),…
A brand-new type of multifunctional nanocomposites with high DC conductivity and enhanced mechanical strength was fabricated. Ionic liquid functionalized Carbon Nanotubes (CNTs-IL) were embedded into epoxy matrix with covalent bonding by the attached epoxy groups. The highest DC conductivity was 8.38 x 10-3 S.m-1 with…
The crack propagation behavior in a 2024 T351 Aluminum Alloy under constant amplitude loading has been studied. This study is complemented by quantitative microfractographic observations and energetic analysis. The obtained results under constant amplitude fatigue tests show that different crack propagation stages can…
This paper presents the results of an experimental program to investigate the effect of temperature on the performance of epoxy and unsaturated polyester polymer mortars (PM). PM is a composite material in which polymeric materials are used to bond the aggregates in a fashion similar to that used in the preparation of…
The effects of processing parameters, such as the punch speed, reheating duration and reheating temperature, on microstructure and ultimate tensile strength (UTS) of thixoformed AM60B magnesium alloy have been investigated. The results indicate that low punch speed, short reheating duration or low reheating temperatur…
The influence of curing tip distance and storage time in the kinetics of water diffusion (water sorption-W SP, solubility-W SB, and net water uptake) and color stability of a composite were evaluated. Composite samples were polymerized at different distances (5, 10, and 15 mm) and compared to a control group (0 mm). A…
The usage of waste silica from AlF3 production is limited due to admixtures of fluoride in its composition. The negative effect of admixtures was eliminated by thermally activating this silica gel. After thermal activation the mineralogical composition of silica gel changes. Fluorine is binding in low-reactive compoun…
In this work, the synthetic hydroxyapatite (HAP) was studied using different preparation routes to decrease the crystal size and to study the temperature effect on the HAP nano-sized hydroxyapatite crystallization. X-ray diffraction (XRD) analysis indicated that all samples were composed by crystalline and amorphous p…
Ultrasonic Velocity Profiling (UVP) is a powerful technique for velocity profile measurements in research and engineering applications as it is the only available method that is cost-effective, relatively easy to implement and applicable to opaque fluid suspensions, which are frequently found in industry. UVP can also…
Bent and folded beam configurations have been popularly used in electrothermoelastic (E-T) actuation. This paper introduces new designs of thermal end-effector with micro-grasping and micro-heating capabilities. We obtained analytical models for all possible steady state temperature responses of suspended and overhang…
This paper describes the manufacturing process of quartz-pellets and shows their potential use as thermoluminescence dosimeters (TLD) for those applications where low-levels of ionising radiation are present. Two batches of cold-pressed pellets were produced and their resistance were evaluated by vibration tests and w…
The miniaturization of components and systems is advancing steadily in many areas of engineering. Consequently, micro-machining is becoming an important manufacture technology due to the increasing demand for miniaturized products in recent years. Precision machining aims the production of advanced components with hig…
Ba0.77Ca0.23TiO3 ceramics were produced in this work starting from nanopowders synthesized via a polymeric precursor method. By adjusting the pH values of the precursor solutions above 7, it was possible to prepare powders weakly aggregated and with a smaller particle size, both facts which traduced into an enhanced n…