Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Steel bar embedded in an alkali-activated slag (AAS) concrete was tested under complete immersion, in 3.5% NaCl solution by weight of the slag. Ordinary Portland cement (OPC) was also tested for comparative purposes and exposed to the same solution. Monitoring of open-circuit potential, polarization resistance measure…
The applications of the chromium ferritic stainless steel AISI 410S have been considerably increased in the last years in many technical fields as chemical industries and oil or gas transportation. However, the phase transformation temperatures are, currently, unknown for this alloy. The aim of this work is to determi…
This paper shows theoretical models (analytical formulations) to predict the mechanical behavior of thick composite tubes and how some parameters can influence this behavior. Thus, firstly, it was developed the analytical formulations for a pressurized tube made of composite material with a single thick ply and only o…
Colloidal processing of ceramics offers a high potential to achieve homogeneous microstructures with improved material properties. In this study, a novel forming method is investigated, which was already applied successfully for the fabrication of ceramic matrix composites (CMC), but is also considered to be a suitabl…
The processing of 3% Si steel is characterized by the use of MnS particles as a normal grain growth inhibitor. Experiments were carried out to investigate the grain growth in this material during heat treatments at low temperature. Industrial decarburized samples were annealed in the range 825-845 °C and a detailed st…
The measurement of elongational viscosity still evokes a series of problems in comparison with the relatively well-established measurement of shear viscosity. Recently new techniques have appeared enabling measurement of elongational viscosity with the samples for which the aspect ratios of their geometrical shapes (i…
Hydroxyapatite-collagen (HA/Col) composites are potential scaffolds for bone tissue engineering. In this work, three-dimensional (3-D) HA/Col (50/50 wt. (%)) scaffolds were synthesized using a self-assembly method and cross-linked with a 0.125% glutaraldehyde solution. Scaffolds were evaluated in vitro by cytotoxicity…
This study evaluated the effect of artificially accelerated aging (AAA) on the surface hardness of eight composite resins: Filtek Z250, Filtek Supreme, 4 Seasons, Herculite, P60, Tetric Ceram, Charisma, and Filtek Z100. Sixteen specimens were made from the test piece of each material, using an 8.0 × 2.0 mm teflon matr…
The present study investigated the Ti-46Al-4Nb-2Mo and Ti-46Al-4Nb-2Cr (at.%) alloys, which were prepared by solution treatment at 1,400 °C for 30 minutes prior to being air-cooled. The alloys were subsequently reheated to 1350 °C for 60 minutes and were cooled to room temperature by oil or water quenching. The evolut…
Single crystalline Ca2Ge7O16 nanowires have been synthesized using CaO and GeO2 as the raw materials. Various factors that affect the formation and size of the Ca2Ge7O16 nanowires have been analyzed. The obtained products are characterized by X-ray diffraction, transmission electron microscopy and scanning electron mi…
Cu (II) removal equilibrium from aqueous solutions using calcined clays "Bofe" and "Verde-lodo" has been studied by batch and fixed-bed in static and dynamic systems, respectively. Analyses were performed for physicochemical characterization of clays using the techniques: X-ray fluorescence (XRF), thermogravimetry (TG…
A 7.4 mm thick strip of 3003 aluminum alloy produced by the industrial twin-roll casting (TRC) process was homogenized at 500 °C for 12 hours, after which it was cold rolled in two conditions: 1) to reduce the strip's thickness by 67%, and 2) to reduce it by 91%. The alloy was annealed at 400 °C for 1 hour in both con…
The main goal in this work is to conduct a quantitative analysis of the mechanical stir casting process for obtaining particulate metal matrix composites. A combined route of stirring at semi-solid state followed by stirring at liquid state is proposed. A fractional factorial design was developed to investigate the in…
A combined chemical-electrochemical oxidation method to obtain porous bioactive TiO2 films on titanium is reported. In this case, a titanium chemical pre-etching followed by the micro-arc oxidation (MAO) treatment is proposed and optimized, to obtain a high-roughness and porous surface which benefits the titanium/bone…
With a view to implement sustainability concepts (namely, use of locally available materials and industrial by-products) in the concrete construction industry, the possibility of use of crushed stone fine aggregate as replacement to river sand is explored in this paper. Towards this, tests have been carried out on con…
In some types of surgical implants, such as bone screws and plates, Grade 2 Ti is seriously considered as a replacement for the Ti-6Al-4V alloy. Advantages are lower cost and the absence of Al and V, which have been identified as potentially harmful to human health. The present paper shows that the lower strength of t…
A vibration rheometer has been developed for the purpose of determining the viscosity coefficient and the yield value of fresh concrete under vibration. The main parts of the apparatus, a test specimen and a vibration source form a unitary oscillatory system whose parameters can be measured with sufficient precision.…
The growing concern with environmental issues in tanneries and the search for a technological solution to their wastes are evaluated in this study. The leather shaving was chemically treated aiming the immobilization of the chromium ion on ordinary Portland cement (OPC) matrix. Cementitious mortars were obtained by ad…
Glass-ceramic materials made of 40.0 wt. (%) of sandy tailing from banded iron formation exploitation and 60 wt. (%) of slag from steelwork were analyzed. Vitrification was obtained by heating the batch samples up to 1400 °C for 1 hour and quenching the melt on a stainless steel plate. Devitrification was obtained by…
Close coupled gas atomization has been studied. Pitot tube gas flow measurements support a postulate of transition from an initial sonic to a supersonic and a final sonic state along the convergence region of the jets. Predictions of the d50 median diameter utilizing a two phase model for primary and secondary break u…