Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A new hydrothermal route for preparing biphasic calcium phosphate monoliths is proposed. Firstly, a slurry of beta-tricalcium phosphate/ortho-phosphoric acid (b-TCP/H3PO4) is cast into the desired final shape and size to obtain a block composed of dicalcium phosphate dihydrate (DCPD) and b-TCP. This block is then trea…
Surfaces with very poor mechanical and frictional properties can be improved, or even, acquire new properties similar to diamond if good adherent CVD diamond film is obtained on it. In this work, nitrogen ions were sub-implanted on pure molybdenum as a means to enhance CVD diamond film adherence. Deposition time from…
Sulfoaluminate belite clinkers by burning raw at moderate temperatures near 1250 °C were synthesized. The used mixtures were made by calcium carbonate blended to two industrial wastes: low calcium fly ash and phosphogypsum. The clinkers were characterised by X-Ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and fr…
In this paper, the linear and non-linear rheological properties of estuarine cohesive sediments were investigated. The density of the sediments has been determined by pycnometry. Creep and oscillatory shear measurements have been performed in order to determine i) the transitions in mechanical response to creep and os…
In this paper we present the synthesis and simulation of alkynes derivatives. Semiempirical calculations were carried out for the ground and first excited states, including the spectroscopic properties of the absorption and emission (fluorescence and phosphorescence) spectra by INDO/S-CI and DNdM-INDO/S-CI methods wit…
The use of X-ray as an inspection technique to ensure the integrity of industrial products dates from the beginning of the 20th century. Therefore, it is a tool of non-destructive inspection widely known. Nowadays, however, there are several researches forward on the optimization of such inspection technique, mainly f…
Biomass Refinery (BR) is a null pollution thermochemical sequential cracking of any biomass and some petrochemical products, which generates chemicals, liquid or solid fuels and inorganic submicrometric/nanometric powders (SM/NM) such as ashes, silica, and carbon black. The processing route, powder characterisation an…
This work presents a proposal to assess the abrasive wear of composite resins available in the national market, which are materials largely used in dental clinics for functional and aesthetic tooth restorations. This was achieved by utilizing an experimental set-up on which a dynamic disc covered with proper porcelain…
We propose an original route to process diamond wires, denominated In Situ Technology, whose fabrication involves mechanical conformation processes, such as rotary forging, copper tubes restacking, and thermal treatments, such as sintering and recrystallisation of a bronze 4 wt.% diamond composite. Tensile tests were…
In this paper we discuss the properties of optically induced birefringence in DR19-MDI cast films that may be used in optical storage applications. The selection of DR19-MDI cast films was based on a comparative study of optical storage properties of Langmuir-Blodgett (LB) films from various azopolymers. DR19-MDI poss…
In this work we described theoretical calculations on the electronic structure and optical properties of the dyes crystal violet and malachite green based in semiempirical methods (Parametric Method 3 and Intermediate Neglect of Differential Overlap / Spectroscopic - Configuration Interaction) and the synthesis of a n…
This paper reports on a thermodynamic calculation-based study of the CaO-SiO2-CaCO3-H2O closed system at 25 °C, conducted to determine the range of carbonate ion concentrations at which each phase of the system is stable. Portlandite (CH) and the CSH gel were found to be stable for carbonate ion concentrations of less…
In a. sample made up of 3312 boards of scots pine (pinus sylvestris) and 3318 boards of laricio pine pinus nigra Van Saltzmannii), both of Spanish provenance, and ranging in size from 100x40x2500 mm to 200x70x4500 mm, previously tested in accordance with the procedure set forth in UNE EN 408 standard, the relationship…
Abstract A novel method to continuously measure the rate of build-up of an immobilised layer (apparent filter cake) was demonstrated for three mineral suspensions containing carboxymethyl cellulose and polymer latex. These suspensions were designed to be similar to those normally used as coating colours within the pap…
In the present study, mechanical properties of porous glass reinforced hydroxyapatite bioceramics were assessed by microhardness, bending and compression tests and fracture toughness determination. Porous discs were produced by a dry method using wax spheres as pore formers. Green bodies were sintered and the final mi…
The corrosion products of carbon steel and weathering steel exposed to three different types of atmospheres, at times ranging from one to three months, have been identified. The steels were exposed in an industrial site, an urban site (São Paulo City, Brazil), and a humid site. The effect of the steel type on the corr…
This paper presents a review of researches on CBN (cubic boron nitride) grinding wheels with the purpose of identifying the state of art in abrasive machining and serving as the basis for future researches and laboratory tests. The scientific studies investigated here report on interesting results involving grinding,…
Nickel- and cobalt-doped magnetites were prepared by a co-precipitation method and studied in some detail, in an effort to identify some effects of the doping cations on the magnetic, crystallographic and morphological properties of the resulting spinel. The synthetic samples were characterized by conventional chemica…
The influence of laser parameters in welding aluminum alloys was studied in order to reduce hot cracking. The extension of cracks at the welding surface was used as a cracking susceptibility (CS) index. It has been shown that the CS changes with changing welding velocity for binary Al-Cu alloys. In general, the CS ind…