Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A small- and wide-angle X-ray scattering study was performed on two metallocene catalyzed isotactic polypropylene (miPP) resins. The results were compared with two similar molecular weight Ziegler–Natta catalyzed isotactic polypropylene (zniPP) materials. Wide-angle X-ray diffraction (WAXD) results showed the existenc…
In this work, several PS/HDPE (high density polyethylene), PS/LLDPE (linear low density polyethylene) and PS/ULDPE (ultra low density polyethylene) blends were prepared in a composition range were atactic polystyrene (PS) was always the matrix component. All the types of polyethylenes employed, when dispersed into dro…
Grain growth kinetics for nanostructured nickel was studied by means of isothermal and isochronal annealing and TEM. The range of temperature for the isothermal and isochronal annealing has been selected between 603K and 683K. The isothermal curves for grain size show that an explosive grain growth occurs in the early…
Nanometer‐sized BaTiO 3 powders have been synthesized hydrothermally from Ba(OH) 2 and titanium alkoxide at 150°C for 2 h, and the Ba/Ti ratio has been measured with an accuracy of ±0.003. Stoichiometric powders can be obtained by adjusting the Ba/Ti ratio of the reactants to a value of 1.018. At a lower Ba/Ti ratio,…
Differential scanning calorimetry (DSC) can be used to infer the distribution of lamellar crystal thickness l. For homopolymers, the relation between melting temperature T and thickness is described by the Gibbs relation. In this case the weight distribution function of thickness g(l) ∝ P(T)(T − T)2, where P(T) is DSC…
The molecular and electronic structure of the planar nickel dithiolene (1c, R = H) and of related complexes derived from nickel dithiolene by replacement of Ni by Pd (palladium dithiolene, 2c, R = H) or by Pt (platinum dithiolene, 3c, R = H), or by replacement of S by NH (nickel diiminolene, 1a, R = H), O (nickel diox…
Abstract Polymeric porous membranes were prepared from polytetrafluoroethylene (PTFE) fine powder by a series of mechanical operations, such as extrusion, rolling, and stretching. The structure of the prepared porous membrane was well characterized by a spatial periodicity of nodes (domain of agglomerated PTFE particl…
The phase behavior of colloid-polymer mixtures, and of solutions of globular proteins, is often interpreted in terms of a simple model of hard spheres with short-ranged attraction. While such a model yields a qualitative understanding of the generic phase diagrams of both colloids and proteins, it fails to capture one…
In this study, sintered glass‐ceramics made up of jarosite (a hazardous industrial waste) have been obtained by sintering high‐iron‐content glasses. Thermal gravimetry and differential thermal analysis, carried out in different atmospheres, have been utilized to explain the phase formations in the volume and iron oxid…
The susceptibility of ${(\mathrm{S}\mathrm{m}}_{0.65}{\mathrm{Sr}}_{0.35}{)\mathrm{M}\mathrm{n}\mathrm{O}}_{3}$ shows an unusual temperature dependence above the Curie temperature which is attributed to the presence of small manganese-ion clusters with $S\ensuremath{\approx}9.$ A field-induced transition is observed i…
Photoelectrochromic “smart” window technology is extended to include the use of flexible substrates and solid‐state electrolytes. This should facilitate their application as retrofit modifications of office windows, where, by blocking incoming solar irradiation, they could substantially lower air‐conditioning costs. T…
The infrared absorption spectra of polycrystalline ${\mathrm{LaMnO}}_{3}$ and ${\mathrm{CaMnO}}_{3}$ measured in the frequency range of the transverse optical phonons are reported, discussed, and compared with calculations of the lattice dynamics. For ${\mathrm{LaMnO}}_{3}$ the measured spectrum is consistent with the…
Our objective in the series of the present work is to obtain a type of magnet in which the weight average of ferromagnetic and ferrimagnetic characters is precisely controlled by fine tuning of the composition. For this attempt, we have prepared the $({\mathrm{Ni}}_{x}^{\mathrm{II}}{\mathrm{Mn}}_{1\ensuremath{-}x}^{\m…
The compatibilizing effect of anhydride groups attached to a polyester was examined while blending soy protein and a biodegradable polyester. Three different polyesters grafted with anhydride functional groups were used as compatibilizers for blending with soy protein concentrate, soy flour, and soy isolate. The proce…
As the second paper of a series of our studies on surface-enhanced Raman scattering (SERS) of biological molecules on metal colloid, this paper reports effects of aggregation of gold colloid on the SERS intensity of glycine (Gly) in aqueous solutions and comparison of effects of pH of the Gly solutions between gold an…
The variation of the ultimate stress and the elastic modulus of four different natural fiber-resin matrix composites was evaluated as a function of the aging of these composites in distilled water. Their diffusion coefficients and the maximum water content were also determined by fitting the experimental data to the F…
Because of the need for methods for successful transplantation of autologous fat, the differentiation of human preadipocytes on surgical mesh coated with various extracellular matrix components was investigated. Biopsy specimens of human adipose tissue were collected from seven different patients and were subjected to…
Recently it was shown that smectic liquid crystal phases formed by achiral banana-shaped molecules are chiral. Films of such phases generally contain both homochiral (consisting of layers of the same chirality) and racemic (the chirality alternates in subsequent layers) domains. So far it has not been clear how to con…
Heat conduction in thin films and superlattices is important for many engineering applications such as thin-film based microelectronic, photonic, thermoelectric, and thermionic devices. Past modeling efforts on the thermal conductivity of thin films were based on solving the Boltzmann transport equation that treats ph…
Mechanical properties of sputtered AlCu(0.5 wt %) thin films, 0.2–2.0 μm thick, were determined by tensile testing. For comparison, tensile tests were also performed on bulk samples of the same composition. The films were deposited on thin polyimide foils. They were characterized with respect to the surface, microstru…