Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Noble metals such as gold and silver are conventionally used as the primary plasmonic building blocks of optical metamaterials. Making subwavelength-scale structural elements from these metals not only seriously limits the optical performance of a device due to high absorption, it also substantially complicates the ma…
Separation of bulk tungsten disulfide (or WS2) into few-layer two-dimensional (2-D) crystals is of interest because of their high surface area for certain chemical processes and size-dependent optical and electronic characteristics. Herein, we demonstrate a process that involves the physical separation of weakly bonde…
Despite several years of research into graphene electronics, sufficient on/off current ratio I(on)/I(off) in graphene transistors with conventional device structures has been impossible to obtain. We report on a three-terminal active device, a graphene variable-barrier "barristor" (GB), in which the key is an atomical…
Double layer interactions between charged particles and surfaces play a vital role in a variety of technical and biological systems because they determine the stability of, e.g., protein-membrane biointerfaces. The underlying theoretical principle is based on the overlap of two different double layers that induce surf…
Abstract Polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with clay (3 and 5 wt % depending on the formulation), different clays (montmorillonite and sepiolite) and different surface functionalization (ammonium salts and silanes) were stud…
Droplet dynamics analysis concerns the measurements of droplet volume, cap and base areas and contact angles, as they change in time to study evaporation, wettability, adhesion and other surface phenomena and properties. In a typical procedure, the two-dimensional measurements are based on a series of images recorded…
The structure of (Ga(2)O(3))(2)(ZnO)(13) has been determined by a single-crystal X-ray diffraction technique. In the monoclinic structure of the space group C2/m with cell parameters a = 19.66 (4), b = 3.2487 (5), c = 27.31 (2) Å, and β = 105.9 (1)°, a unit cell is constructed by combining the halves of the unit cell…
We report herein on changes in the Fe 3+ /ΣFe ratios induced by the electromigration of alkali ions (Alk + s) in natural alkali silicate glasses by measuring the shift of the Fe Lα emission peak at the electron microprobe . The Fe 3+ reduction to Fe 2+ classically occurs by electron transfer (Fe 3+ + e − → Fe 2+ ). Th…
We report the occurrence of kinetic arrest of the first-order phase transition from R3c to Pbnm in supercooled La(x)MnO(3±δ) (x = 1 and 0.9, i.e. δ > 0.125). Structural studies have been done, employing low temperature transmission electron microscopy (LT-TEM) and low temperature x-ray diffraction (LT-XRD) techniques.…
This paper reviews different methods to characterize the barrier and the micro-mechanical properties of polymer substrates coated with ultra-thin silicon oxide layers deposited by plasma process (PECVD). Uniaxial fragmentation tests are used to determine the evolution of oxygen barrier (OTR) of the barrier film under…
Dodecylbenzenesulfonic acid-doped polyaniline was prepared by sonication method. Electrically conductive blends were prepared by mixing a polyaniline–dodecylbenzenesulfonic acid salt with epoxy resin and chloroprene rubber. The nanostructure of the conductive blends was studied by scanning electron microscopy. The pol…
Imaging techniques have been used to capture the temporal and spatial evolution of light emissions from collapsing bubble clouds at high static pressures. Emission events lasting up to 70 ns with peak diameters nearing 1 mm have been observed. Observations of the cloud evolution before and after emission events have b…
Abstract We investigated the crystallization growth of isotactic polypropylene (PP)/clay phase‐separated microcomposites under carbon dioxide (CO 2 ) by in situ observation with a specially designed high‐pressure visualized cell. The number density of the spherulite was larger and the size of the spherulite filled in…
CaS nanoparticles have been synthesized by microwave irradiation, using Ca(Ac) 2 as Ca -precursor, and thioacetamide as S -source. The as-prepared sample has a uniform morphology and high purity. After heat treatment similar results were observed. Synthesized nanoparticles were characterized by X-ray powder analysis (…
Single crystals of superconducting KxFe2-ySe2 have been grown with the optical floating-zone technique under application of 8 bar of argon pressure. We found that large and high quality single crystals with dimensions of ~\varnothing6 \times 10 mm could be obtained at the termination of the grown ingot through quenchi…
Abstract A series of ultraviolet‐curable hybrid materials was first synthesized here by sol–gel process based on tetraethoxysilane (TEOS) and polyurethane acrylate/epoxy acrylate resin. The functional groups in the hybrid materials were investigated by infrared spectroscopy (IR) analysis. The crystallinity of the hybr…
A configuration of hole patterned electrode liquid crystal microlens array with an ultrathin glass slab was fabricated. To reduce the fringing electric field effect and avoid the occurrence of disclination lines, an ultrathin glass slab was introduced between the patterned electrode and liquid crystal layer. The glass…
Abstract Jute fabric‐reinforced sandwich composites were fabricated using engineering thermoplastics. The jute fabrics were precoated with thermosetting resin to improve their thermal resistance before molding of the composites. Thermal gravimetric analysis (TGA) studies revealed that the resin coated fabrics decompos…
ABSTRACT This publication presents the experimental and numerical methods to model the devolatilization process of a glass‐fibre‐reinforced polyester/balsa‐cored sandwich material on small scale. The fundamental modelling of the source term in pyrolysis‐based fire simulations requires as input data the thermochemical…
One-dimensional nanomaterials have attracted a great deal of research interest in the past few decades due to their unique mechanical, electrical, and optical properties. Changing the shape of nanowires (NWs) is both challenging and crucial to change the property and open wide functions of NWs, such as strain engineer…