Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Ni-P/Cu/Ni-P multilayer coatings were prepared by deposition of Cu layer between two Ni–P layers. The Cu layer was deposited by metal displacement reaction between Cu2+ and Fe atoms. Corrosion behavior of single-layer Ni-P coatings, double-layer Ni-P/Cu coatings, and three-layer Ni-P/Cu/Ni-P coatings were investigated…
The mathematical model and numerical simulations of the liquid steel flow in a tundish are presented in this paper. The problem was treated as a complex and solved by the finite element method. One takes into consideration in the mathematical model the changes of thermophysical parameters depending on the temperature.…
Micro-jet cooling after welding was tested only for MIG welding process with argon, helium and nitrogen as a shielded gases. A paper presents a piece of information about nitrogen and oxygen in weld after micro-jet cooling. There are put down information about gases that could be chosen both for MIG/MAG welding and fo…
In this paper, the results of investigations are presented, into the microstructure and magnetic properties of the following amorphous alloys in the as-quenched state: Fe82Zr7Nb2Cu1B8 and Fe86Zr4Y3Nb1Cu1B5. The studied material was produced in the form of thin ribbons of 3 mm width and 20 μm thickness. The structure a…
Abstract VO x thin films were deposited on Corning glass, fused silica and Ti foils by means of rf reactive sputtering from a metallic vanadium target. Argon-oxygen gas mixtures of different compositions controlled by the flow rates were used for sputtering. Influence of the oxygen partial pressure in the sputtering c…
316L stainless steel is a well-established engineering material and lots of components are fabricated by either ingot metallurgy or powder metallurgy. From the viewpoints of material properties and process versatility, powder metallurgy has been widely applied in industries. Generally, stainless steel powders are prep…
In this study, a continuously casted ZK60A magnesium alloy (Mg-Zn-Zr) was extruded in two different extrusion ratios, 6:1 and 10:1. The evolution of precipitates was investigated on the two extruded materials and compared with that of as-casted material. The microstructural analysis was performed by electron backscatt…
Parameters which characterize the nitriding atmosphere in the gas nitriding process of steel are: the nitriding potential KN, ammonia dissociation rate α and nitrogen availabilitymN2. The article discusses the possibilities of utilization of the nitriding atmosphere’s nitrogen availability in the design of gas nitridi…
Flow behavior of a ZK60A magnesium alloy after continuous casting and subsequent extrusion was examined in tension at a range of strain rates of 3.0×10−6 − 1.0×10−2 s−1 at temperatures of 473-623K. The results demonstrated that the alloy exhibited a maximum elongation of ~250% at 523K when tested at an initial strain…
Stainless steel (SS) is a well-known material for the internal parts of nuclear power plants. It is known that these alloys exhibit radiation-induced segregation (RIS) at point defect sinks at moderate temperature, while in service. The RIS behavior of SS can be a potential problem by increasing the susceptibility to…
Abstract This work presents continuous cooling transformation diagrams for different kinds of carbidic nodular cast iron. We investigated the cast iron, chemical composition of which in nodular cast iron allows the obtainment of a metal matrix which consists of: pearlite, upper bainite and its mixture with lower baini…
The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100°C-375°C and strain rate range 10−4s−1 and 4×10−4s−1 using dilatometer DIL 805 BÄHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermoplastic in vacu…
This article covers recent developments of material research in Thailand with a focus on environmental sustainability. Data on Thailand’s consumption and economic growth are briefly discussed to present a relevant snapshot of its economy. A selection of research work is classified into three topics, namely, (a) resour…
The progressing development of industry and the associated rising environmental pollution create the need for the intensification of combustion processes and the implementation of increasingly stringent environmental protection standards. Therefore, an intensive progress in scientific and research work that is lately…
Some diamond tools use iron in their composition, and it is known that iron is a strong catalyst for the graphitization of diamonds. This graphitization occurs mainly during the processing of composite materials - conventional sintering or hot pressing, and during cutting operations. This work studies the effect of Ti…
In 1993 the first of a series of cathodic protection (CP) systems were installed on the approach viaducts of a major UK bridge structure. Over subsequent years the structure had additional phases of repairs and CP installations. Due to the requirement to competitively tender each phase, a range of CP systems were inst…
This study assessed the mechanical properties, and structural changes induced by high temperature exposure, of alkali-silicate activated slag cements produced with sodium silicates derived from silica fume (SF) and rice husk ash (RHA). Similar reaction products were identified, independent of the type of silicate used…
Abstract The aim of this work was examination of gadolinium-doped 3YSZ electrical and structural properties. Such materials may be used as electrolytes in intermediate temperature solid oxide fuel cells (IT-SOFC). First step of the research was synthesis of 3YSZ with different contents of gadolinium (0.25; 0.5; 1.0 at…
The green body and dense substrate of indium tin oxide was joined by uniaxially pressing at 0.3 MPa at 1300°C to test the restoring of the eroded part of transparent conducting oxide target. The green body was sintered to 98% of theoretical density under the suppression of shrinkage along the boundary below 5%. The bo…
The phase-field methods were developed mainly for studying solidification of pure materials, being then extended to the solidification of alloys. In spite of phase-field models being suitable for simulating solidification processes, they suffer from low computational efficiency. In this study, we present a numerical t…