A. de Saja、F. Rull、J. M. Pastor 等 4 位作者1981-01-01Kristall und Technik
Abstract Cerium Sulfate octohydrate crystals were crystallized from aqueous solutions under controlled conditions. The solubility measurements were carried out on temperatures between 10 and 80°. Thermoanalytical methods were applied for the study of the thermal behaviour of this compound. Raman spectra of polycrystal…
Crystal structures of chemical compoundsSolid-state spectroscopy and crystallographyThermal and Kinetic Analysis
John G. Cook1981-01-01Canadian Journal of Physics
We report the results and interpretation of precision measurements of the thermal conductivity, electrical resistivity, and thermopower of potassium made from just below the melting temperature, 335.5 K, to 700 K. It is found that the Lorenz function is approximately 10% below the Sommerfeld value in the solid state,…
Material Dynamics and PropertiesSurface and Thin Film PhenomenaThermodynamic and Structural Properties of Metals and Alloys
Masayoshi Hasegawa、Motoaki Osawa1981-01-01Transactions of the Iron and Steel Institute of Japan
The damage of nickel-base heat resistant alloys exposed to hydrogen at high temperature and pressure was investigated. Tested materials were mainly Inconel 600, Hastelloy X and nickel. Inconel 600 solution-treated exhibited embrittlement due to the occluded hydrogen. Hastelloy X solution-treated did not exhibit embrit…
Hydrogen embrittlement and corrosion behaviors in metalsHigh Temperature Alloys and CreepNuclear Materials and Properties
Shôzô Miyazaki、Midori Oshiba、TANEKAZU NADAI1981-01-01Chemical and Pharmaceutical Bulletin
The dissolution properties of hydrochloride, sulfate, and iodide salts of berberine were compared. The apparent solubility and dissolution rate of the hydrochloride salt were less than those of the sulfate salt in media resembling GI fluids with respect to pH. The common ion effect on the solubility of berberine hydro…
Analytical Chemistry and ChromatographyCrystallization and Solubility StudiesPharmacological Effects of Natural Compounds
R. W. Schutz、L. C. Covington1981-01-01OpenAlex
This paper presents guidelines for corrosion testing of titanium with respect to five general modes of corrosion failure that are known to titanium. These modes are general corrosion, crevice corrosion, hydrogen embrittlement, stress-corrosion cracking, and anodic breakdown pitting.
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsTitanium Alloys Microstructure and Properties
Kiyoshi Kusabiraki、Yutaka Shiraishi1981-01-01Journal of the Japan Institute of Metals and Materials
In order to obtain the vibrational spectra of molten silicates, infrared emission spectra of molten M2O·xSiO2 (M=Li, Na, K, and x=1 to 4 or 5) were measured in the range of wave numbers between 25000 and 400000 m−1 at temperatures 50 K higher than their liquidus.Transmission spectra in the molten state were derived fr…
Zeolite Catalysis and SynthesisGlass properties and applicationsRecycling and utilization of industrial and municipal waste in materials production
Toyoshige Sasaki、Masanori Kawaguchi、Masahiro Yamane 等 4 位作者1981-01-01Journal of the Japan Institute of Metals and Materials
Studies by X-ray photoelectron spectroscopy (XPS) have been carried out in order to make clear the structure of vitreous silicate. In a previous paper, three kinds of oxygen ions, i.e. O0, O− and O2−, were analyzed from the O1s XPS spectra for several compositions of lead silicate glass by using an electronic computer…
Glass properties and applications
Danny C. Reinke1981-01-01Transactions of the Kansas Academy of Science
Enteromorpha Link is primarily a marine genus that has been occasionally reported from inland salt springs and some inland lakes with high salt concentrations (Collins, 1909; Smith, 1950). In contrast to marine species, the mature thalli of most freshwater Enteromorpha consist of long, usually branched, hollow tubes w…
Marine Biology and Ecology ResearchDiatoms and Algae Research
Rudolph D. Deanin、Deborah Hauser1981-01-01Polymer-Plastics Technology and Engineering
Plastics may be subjected to mild stress and strain without failure or they may be subjected to weak solvents or aqueous surfactants without failure, but when they are subjected to combination of these two types of variables they often suffer catastrophic brittle fracture. Such failure has been named environmental str…
Mechanical Behavior of CompositesPolymer crystallization and propertiesMaterial Properties and Processing
J.M. Beeston1981-01-01OpenAlex
A Type 348 stainless steel in-pile tube irradiated to a fluence of 3 × 1022 neutrons/cm2 (E > 1 MeV), 57 displacements per atom, was destructively examined. The service had resulted in a maximum total creep of 1.8 percent at the high fluence. The metal temperature ranged between 623 and 652 K, hence the thermal…
Fusion materials and technologiesNuclear Materials and PropertiesGraphite, nuclear technology, radiation studies
D. H. Bradhurst、P.M. Heuer1981-01-01CORROSION
Four grades of high strength maraging steel were tested in air and aqueous solutions for susceptibility to stress corrosion cracking and hydrogen embrittlement. Electrochemical methods were used to characterize each alloy and to control the test conditions during slow strain rate tensile tests. Environment sensitive f…
Hydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and DurabilityNon-Destructive Testing Techniques
W. Granier、P. Bernier、M. Dohri 等 5 位作者1981-01-01Journal de Physique Lettres
We have studied the 19F NMR of the TlSn2F5 compound at various temperatures and frequencies. While the measured T1 shows a classical behaviour for T < 358 K, as is generally observed in ionic conductors, it undergoes a sudden increase at T ∼ 358 K corresponding to a change in the crystallographic space group. For high…
Advanced NMR Techniques and ApplicationsSolid-state spectroscopy and crystallographyInorganic Fluorides and Related Compounds
Stephen B. Sello、C. V. Stevens1981-01-01Pure and Applied Chemistry
Conference International Conference on Surface and Colloid Science, International Conference on Surface and Colloid Science, ICSCS, Surface and Colloid Science, Fourth, Jerusalem, Israel, 1981-07-05–1981-07-10 Published Online: 2009-01-01 Published in Print: 1981-01-01 © 2013 Walter de Gruyter GmbH, Berlin/Boston
Surface Modification and SuperhydrophobicityTextile materials and evaluations
Shigenori Hori、Hideo Tai、H. Katayama1981-01-01Journal of the Japan Institute of Metals and Materials
Effects of certain solute elements on the recrystallization temperature of copper have been studied by X-ray, micro-hardness and electrical resistivity measurements. Specimens of copper alloys containing solute elements of 0.01–0.3 at% were melted and cast in vacuo, and cold rolled to 90% reduction. The recrystallizat…
Microstructure and mechanical propertiesAluminum Alloy Microstructure PropertiesCopper Interconnects and Reliability
Alain Lefebvre、D. Ménard1981-01-01Acta Crystallographica Section A
Two types of twins are frequently found in naturally and experimentally deformed kyanite. Structural models based on periodic shears are proposed to account for these mechanical twins. The structure of kyanite is then regarded as layered, the limits of each layer being easy glide planes for dislocations. The shear pla…
earthquake and tectonic studiesCrystal Structures and PropertiesSolid-state spectroscopy and crystallography
Sylvie Banon、Christian Chatillon、M. Allibert1981-01-01Canadian Metallurgical Quarterly
Thermodynamic activity measurements of the components in the CaTiO3-Ti2O3-TiO2 ternary system were performed by differential mass spectrometry at about 2150 K. Observed pressures for gaseous species Ca, TiO and TiO2 were used to calculate Ti, TiO, Ti2O3, TiO2 and CaTiO3 activities in the studied liquid mixtures. These…
Energetic Materials and CombustionThermal and Kinetic AnalysisMetallurgical and Alloy Processes
A. A. Urusovskaya、E. V. Darinskaya、R. Voszka 等 4 位作者1981-01-01Kristall und Technik
Abstract On the basis of the investigation of the influence of Ca concentration on yield point at different strain rates it is revealed the nature of the obstacles for dislocations overcomed with and without thermal activation.
Microstructure and mechanical propertiesSilicon and Solar Cell TechnologiesIon-surface interactions and analysis
H. Mizubayashi、Shigeo Okuda1981-01-01Radiation Effects
Elastic after-effects in Wsingle crystals with various orientations were measured below 50 K after fast neutron irradiation at about 5 K. Two prominent relaxation peaks were observed at 5.5 K and 17.6 K (relaxation time of about 2 min). These two peaks correspond, respectively, with the 8 K and 27 K internal friction…
Fusion materials and technologiesRare-earth and actinide compoundsNuclear Materials and Properties
P. Dupuis、R. Roberge、C. Sándorfy 等 4 位作者1981-01-01The Journal of Chemical Physics
The HeI photoelectron and ultraviolet absorption spectra of the oximes and O-methyloximes of a series of conjugated Schiff bases have been determined. The importance of the low ionization potentials of these compounds is stressed, especially in connection with the chromophore of visual pigments. The location of the (π…
Nonlinear Optical Materials ResearchPhotochromic and Fluorescence ChemistryFree Radicals and Antioxidants
R.C. Lobb、H.E. Evans1981-01-01Metal Science
Coupon specimens of 20Cr-25Ni-Nb-stabilized stainless steel have been annealed at 1273 K in dynamic vacuum for periods of from 1 to 1000 h. It is shown that manganese and chromium both evaporate readily over this period with kinetics which are consistent with the rate of loss from the surface being proportional to the…
Metal and Thin Film MechanicsMicrostructure and Mechanical Properties of SteelsHydrogen embrittlement and corrosion behaviors in metals