Daniel K. Schwartz、Suzi Steinberg、Jacob N. Israelachvili 等 4 位作者1992-12-07Physical Review Letters
Atomic force microscope images show that self-assembled monolayers of octadecyltrichlorosilane form on mica by nucleating isolated, self-similar domains. With increasing coverage, the fractal dimension of the growing domains evolves from 1.6 to 1.8. At higher coverage, continued growth is limited by adsorption from so…
Molecular Junctions and NanostructuresBlock Copolymer Self-Assemblynanoparticles nucleation surface interactions
Takashi Amemiya、Kazuhito Hashimoto、Akira Fujishima1992-12-05Denki Kagaku oyobi Kogyo Butsuri Kagaku
Dynamics of faradaic processes in polypyrrole(PPy)fims depending on the thickness of the films and on applied dc potentials have been investigated by ac electromodulation spectroscopy techniques The comparison of the capacitance plots derived from the impedance plots with the modulated transmittance (color admittanceT…
Conducting polymers and applications
Bennet Abramoff、J. Covino1992-12-05Journal of Applied Polymer Science
Abstract The transmittance, flexure strength, Young's modulus, and Vickers hardness of poly(methyl methacrylate) (PMMA), filled with fumed silica, was measured. Transmittance decreased with increasing content of filler. At 2 vol % filler content, composites had a higher transmittance with a lower surface area of fumed…
Polymer Nanocomposites and Propertiesbiodegradable polymer synthesis and propertiesTribology and Wear Analysis
Tzu‐Chien Hsu、Zu‐Ling Liu1992-12-05Journal of Applied Polymer Science
Abstract The effect of the solvent 1‐methyl‐2‐pyrrolidinone (NMP) on the curing of polyimide resins synthesized from pyromellitic dianhydride (PMDA) and 4,4′‐oxydianiline (ODA) has been investigated. Three polyimide precursors, i.e., the polyamic acid (PAA), with controlled amount of NMP were prepared. The study was a…
Epoxy Resin Curing ProcessesSynthesis and properties of polymersThermal and Kinetic Analysis
I. Gilmour、S. S. Russell、J. W. Arden 等 6 位作者1992-12-04Science
One hypothesis for the origin of the nanometer-size diamonds found at the Cretaceous-Tertiary (K-T) boundary is that they are relict interstellar diamond grains carried by a postulated asteroid. The (13)C/(12)C and (15)N/(14)N ratios of the diamonds from two sites in North America, however, show that the diamonds are…
Geological and Geochemical AnalysisAstro and Planetary ScienceDiamond and Carbon-based Materials Research
Roger M. Rowell1992-12-04ACS symposium series
High performance lignocellulosic composites with uniform densities, durability in adverse environments, and high strength can be produced by using fiber technology, bonding agents, and fiber modification to overcome dimensional instability, biodegradability, flammability, and degradation caused by ultraviolet light, a…
Natural Fiber Reinforced CompositesLignin and Wood Chemistry
E. Cannillo、G. Giuseppetti、F. Mazzi 等 4 位作者1992-12-01Zeitschrift für Kristallographie - Crystalline Materials
Article The crystal structure of a rare earth bearing leucophanite: (Ca,RE)CaNa2Be2Si4O12(F,O)2 was published on December 1, 1992 in the journal Zeitschrift für Kristallographie - Crystalline Materials (volume 202, issue 1-4).
Crystal Structures and PropertiesX-ray Diffraction in CrystallographyInorganic Fluorides and Related Compounds
J. F. Moulder、William F. Stickle、P. E. Sobol1992-12-01Surface Science Spectra
XPS measurements are presented for poly (methyl methacrylate). The data include the valence band region and the principal core levels.
X-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy TechniquesIon-surface interactions and analysis
J. F. Moulder、William F. Stickle、P. E. Sobol1992-12-01Surface Science Spectra
XPS measurements for poly (ethyl methacrylate). The data include the valence band region and the principal core levels.
X-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy TechniquesIon-surface interactions and analysis
C. Sabelli、Paolo Orlandi、Giovanna Vezzalini1992-12-01Mineralogical Magazine
Abstract Coaquandite, a new antimony oxy-sulphate hydrate, occurs as spheroidal knobs of silky fibres or, rarely, as tiny transparent colourless lamellar crystals on stibnite at the Pereta mine, Tuscany, Italy; it is associated with klebelsbergite, peretaite, valentinite, sulfur, gypsum, stibiconite, and senarmontite.…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsCrystal Structures and Properties
Jingyu Lian、Tadashi Shiosaki1992-12-01Ferroelectrics
The lead zirconate rich lead zirconate titanate based ceramics present high pyroelectric coefficient as well as low dielectric constant in their rhombohedral ferroelectric phase transitions, and therefore possess many desirable properties for potential applications in pyroelectric devices. The dielectric, pyroelectric…
Ferroelectric and Piezoelectric MaterialsAdvanced ceramic materials synthesisMicrowave Dielectric Ceramics Synthesis
Robert W. Lenz1992-12-01FEMS Microbiology Letters
Pseudomonas oleovorans is an adaptable, aerobic bacterium that can produce a wide range of storage polyesters (poly-β-hydroxyalkanoates, PHAs). With few exceptions, the PHAs obtained when this bacterium is grown with single organic substrates capable of polymer production are generally copolymers. With two different p…
Bacterial biofilms and quorum sensingbiodegradable polymer synthesis and propertiesAntimicrobial agents and applications
Yasushi KANAGAWA1992-12-01Drying Technology
The computer tomography(CT image of wood was analyzed to estimate the moisture content from CT number. Comparing moisture contents, densities and CT numbers, moisture distributions were nondestructively determined by CT numbers detected with the scanner. By periodically measuring CT images of the same cross section of…
Wood Treatment and PropertiesTextile materials and evaluations
Shigefusa F. Chichibu、Nobuhide Yoshida、Hirofumi Higuchi 等 4 位作者1992-12-01Japanese Journal of Applied Physics
Chemical vapor deposition of Cu film on SiO 2 has been studied using cyclopentadienylcoppertriethylphosphine (C 5 H 5 CuP(C 2 H 5 ) 3 ), which contains no oxygen atom itself. The deposited Cu films had complete (111) preferred orientation for deposition temperatures below 450°C. From Auger electron spectroscopy measur…
Metal and Thin Film MechanicsSemiconductor materials and devicesCopper Interconnects and Reliability
R. H. Schuster1992-12-01Die Angewandte Makromolekulare Chemie
Abstract The utilization of rubber mixtures is to achieve a desired combination of properties and performance spectrum of elastomers is nowadays of a considerable technological and economical importance. The successful implementation of this concept requires the knowledge of the factors governing both the phase behavi…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesRheology and Fluid Dynamics Studies
K.T. Ramesh、R. J. Clifton1992-12-01Journal of Applied Mechanics
Pressure-shear plate impact experiments on an elastohydrodynamio lubricant (5P4E) are interpreted by means of a full finite deformation analysis of stress wave propagation in an elastic/viscoplastic material. The elastic response is modeled as that of a neo-Hookean solid, modified to include compressibility in such a…
High-pressure geophysics and materialsForce Microscopy Techniques and ApplicationsHigh-Velocity Impact and Material Behavior
I. D. L. Albert、D. Pugh、J. O. MORLEY 等 4 位作者1992-12-01The Journal of Physical Chemistry
Model exact static and frequency-dependent polarizabilities, static second hyperpolarizabilities and THG coefficents of cumulenes and polyenynes, calculated within the correlated Pariser-Parr-Pople (PPP) model defined over the pi-framework are reported and compared with the results for the polyenes. It is found that f…
Advanced Chemical Physics StudiesFullerene Chemistry and ApplicationsNonlinear Optical Materials Research
Takahiko Iriyama、Kurima Kobayashi、Hiroaki Kato 等 4 位作者1992-12-01IEEE Translation Journal on Magnetics in Japan
Sm2Fe17Nx(x=3), of purity 95 vol%, was obtained by nitrogenation of Sm2Fe17alloy using a mixture of NH3(0.35 atm) and H2(0,65 atm) gases. The saturation magnetization 4πI, was 15.5 kG, and the anisotropy field Hawas found to be 220 kOe. Aligned Sm2Fe17N3powders with an average grain size of 3 μm showed a (BH)maxvalue…
Magnetic and transport properties of perovskites and related materialsHydrogen Storage and MaterialsMagnetic Properties of Alloys
Syed Hamid、Mohamed Bakr Amin、A. G. Maadhah 等 4 位作者1992-12-01Journal of Vinyl Technology
Abstract Photo‐oxidative degradation reactions are mainly responsible for reduced lifetime in polymers. These reactions are responsible for the decay in useful physical and chemical properties of polymers. In addition to high ultraviolet radiation doses, hostile environments have increased temperature, high humidity,…
Microplastics and Plastic PollutionPolymer Science and PVC
Y Doi1992-12-01FEMS Microbiology Letters
The kinetics and mechanism of the synthesis and degradation of polyhydroxyalkanoates (PHA) in Alcaligenes eutrophus have been studied. PHA polymers were accumulated in the cells in nitrogen-free mineral media containing various carbon substrates, and the accumulated PHA polymers were subsequently degraded after the ca…
biodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical ApplicationsMicroplastics and Plastic Pollution