Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Processing conditions were designed to produce alloys 718 (UNS N07718), 725 / 725HS (UNS N07725), and 925 (UNS N09925) with essentially clean grain boundaries, partial coverage of grain boundaries by the precipitates, and full coverage of grain boundaries by the precipitates. Grain boundary precipitates were found to…
Abstract Wet gas corrosion rates of C1018 and X65 steel have been measured at the top and bottom of a high pressure, 10 cm diameter horizontal pipeline under stratified flow conditions with different chloride (Cl-) concentrations. Experiments were performed for 200 hours at 90°C, CO2 partial pressure of 3.8 bar using…
Abstract The development and production of low carbon Cr-containing steels with superior resistance to CO2 corrosion for downhole production applications is presented in this paper. It covers the outcome of an extensive and systematic development programme focusing on metallurgical conditioning and micro-alloying addi…
Large values of Born effective charges are generally considered as reliable indicators of the genuine tendency of an insulator towards ferroelectric instability. However, these quantities can be very much influenced by strong electron correlation and metallic behavior, which are not exclusive properties of ferroelectr…
'Colossal magnetoresistance' in perovskite manganites such as La0.7Ca0.3MnO3 (LCMO), is caused by the interplay of ferro-paramagnetic, metal-insulator and structural phase transitions. Moreover, different electronic phases can coexist on a very fine scale resulting in percolative electron transport. Here we report on…
The reason for the low time-step accuracy of the previously developed approximate backward-difference solution of the Landau–Lifshitz–Gilbert (LLG) equation was found, and improved methods were developed. The improvement was carried out in two steps: correction of the expansion coefficients for the first-order backwar…
Effects of Ni-substitution in Mn–Zn ferrites on power losses and electromagnetic properties have been studied. When NiO was substituted for MnO in the range from 0 to 8 mol%, lattice constants decreased gradually due to the smaller ionic radius of Ni ions. NiO substitution lowered the initial permeability and increase…
Possibility of upscaling for single bubble sonoluminescence by reducing the driving frequency was tested experimentally. The maximum bubble radius and the expansion ratio obtained from an air bubble at a driving frequency of 12.926 kHz and driving amplitude of 1.33 atm at a water temperature of 23.5°C are considerably…
133 Cs ( I =7/2) nuclear magnetic resonance in a Cs 2 CoCl 4 single crystal grown by using the slow evaporation method was measured in the two mutually perpendicular crystal planes. The 133 Cs resonances of two different groups, respectively, with two crystallographically inequivalent cesium nuclei, Cs(I) and Cs(II) i…
A protein crystallographer typically spends a large proportion of time manipulating Protein Data Bank (PDB) formatted coordinate files. Of the many situations where such coordinate data must be altered for a particular purpose, a combination of a simple text editor and a number of programs is required. pdb-mode for EM…
The microscopic magnetic properties of superconducting (T<sub>c</sub> ≅ 6 K) λ-(BETS)<sub>2</sub>GaCl<sub>4</sub> (BETS = bis(ethylenedithio)tetraselenafulvalene) have been investigated by <sup>77</sup>Se NMR in the normal state between 7.1 and 100 K on randomly oriented single crystals with κ-(BETS)<sub>2</sub>GaCl<s…
The defect fluorite Zr 4 O 5 N 2 is presented. A simple layered intergrowth of the important bixbyite and fluorite structure types, it displays an A 4 X 7 vacancy ordering alternative to that in the pyrochlore and other structures. This ordering is stabilized by proximity of the highly charged N 3 - anions to the bixb…
A method to remove the effects of instrumental aberrations from the whole powder diffraction pattern measured with a high-resolution synchrotron powder diffractometer is presented. Two types of asymmetry in the peak profiles caused by (i) the axial-divergence aberration of the diffractometer (diffractometer aberration…
To expand our knowledge of Fe 2+ x V 1- x Z (Z = Al, Ga), band calculations (LMTO-ASA) have been performed for several x values ( x =0, ±0.125, ±0.25) with a supercell method. Obtained density of states and magnetic moments indicate that excess atoms, which are introduced instead of the original Fe or V atom in Fe 2 V…
We have performed neutron powder diffraction measurements for La 1- x Sr x MnO 3 ( x =0.00–0.20) at room temperature. We have found that the crystal structure is orthorhombic ( Pbnm , Z =4; O) at x ≤0.14 and rhombohedral ( R \bar3 c , Z =2; R) at x ≥0.18, respectively. At this structural phase transition, the averaged…
\n\t\t\t\t\tThe microstructures of magnesium AZ31 are examined following hot compression testing and annealing. The grain size, fraction dynamically recrystallized and, in a couple of cases, the crystallographic texture are reported. It was found that the progress of dynamic recrystallization is strongly sensitive to…
A method is presented for simultaneous structural refinement of up to several hundred grains inside powders or polycrystals. The method is based on the use of hard X-rays and the indexing program GRAINDEX , where grain orientations are found by scanning in Euler space. Conventional experimental setups and refinement p…
A new method of protein crystallization, the "Micro-stirring" technique, has been developed. The method combines the traditional vapor diffusion technique and a stirring method. Stirring the protein solution prevents excess spontaneous nucleation and promotes larger crystals. This innovative method, Micro-stirring, is…
Surface properties of antiferromagnetic MnO(001) and NiO(001) are investigated by means of first-principles electronic structure calculations. It is shown that the surface O sites have finite spin magnetic moments of 0.04 µ B and 0.07 µ B for MnO and NiO surfaces, respectively. Because of non-zero energy gap even at t…
An integration method for step-scanned single-crystal intensity data based upon fitting of the individual diffraction profiles by a pseudo-Voigt function is presented. Algorithms for both the recovery of weak intensities from data sets and the rejection of aberrant peak profiles are discussed. The ideas presented in t…