Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The pyrolysis of polymethylsilane (PMS) in an argon gas environment with a flow rate of 1 L/min was investigated as a standard pyrolytic process, and the investigation showed SiSi network formation at 573 K. Subsequently, various condensed PMS resins were prepared by adjusting pre‐heat‐treatment or reflux conditions i…
Abstract A tailor‐made autoclave setup for simultaneous acoustic irradiation and hydrogenation was used in the hydrogenation of fatty acids and carbohydrates. The aim was not to perform actual sonochemistry but to retard deactivation of the catalyst by means of acoustic irradiation. The catalyst used was a Raney nicke…
Achiral multi-block liquid crystals are not expected to form polar domains. Recently, however, films of nanoaggregates formed by multi-block rodcoil molecules were identified as the first example of achiral single-component materials with macroscopic polar properties. By solving an Ising-like model with dipolar and as…
Large area volume phase holographic (VPH) gratings have been made for use in spectrographs attached to large telescopes and for scanning LIDAR systems. Examples of the transmitted wavefronts, the spectral efficiency measurements and other parameters such as uniformity, scatter, absorption and Q have been gathered and…
Serine hydroxymethyltransferase (SHMT), a pyridoxal 5'-phosphate (PLP)-dependent enzyme, catalyses the transfer of the hydroxymethyl group from serine to tetrahydrofolate to yield glycine and N (5), N (10)-methylenetetrahydrofolate. An analysis of the known SHMT sequences indicated that several amino acid residues wer…
A memory function equation and scaling relationships were used for the physical interpretation of the Cole-Cole exponent. The correspondence between the relaxation time, the geometrical properties, the self-diffusion coefficient and the Cole-Cole exponent was established. Using this approach the dielectric relaxation…
A series of Z type hexaferrite samples with composition Ba3CoxZn2 -xFe24O41 (x varying from 0·0 to 2·0 in steps of 0·4) were prepared by a citrate sol-gel process. Samples were characterised by TG-DSC, X-ray diffraction, and scanning electron microscopy. Complex permittivity and permeability, and dielectric and magnet…
The crystal structure of cafetite, ideally Ca[Ti 2 O 5 ](H 2 O), (monoclinic, P2 1 /n, a = 4.9436(15), b = 12.109(4), c = 15.911(5) Å, b = 98.937(5)°, V = 940.9(5) Å 3 , Z = 8) has been solved by direct methods and refined to R 1 = 0.057 using X-ray diffraction data collected from a crystal pseudo-merohedrally twinned…
Pb(Zr,Ti)O3 (PZT) thin films were deposited onto Pt/TiO2/SiO2/Si substrates with different-types of TiO2 layers by liquid delivery MOCVD at 550°C. Three kinds of TiO2 adhesion layers were examined: 200 oriented TiO2 with rutile structure, 103 oriented TiO2 with anatase structure and randomly oriented TiO2 which consis…
Benchmark solutions in Computational Fluid Dynamics are necessary for testing and for the verification of newly developed algorithms and codes. For flows involving heat transfer coupled to solid-liquid phase change and convection in the melt, such benchmark solutions do not exist. A set of benchmark problems has recen…
Abstract The urea method was applied to deposit a nickel–calcium catalyst inside porous filter discs to develop a gas cleaning technique involving the combined removal of tars and particles from hot biomass gasification gas. Some catalytic filter discs were tested in typical filtration conditions for the decomposition…
Ce 0.8 Gd 0.2 O 1.9 solid ionic conductors have been prepared by techniques involving polymeric precursors: the Pechini and the amorphous citrate techniques. The aim of this work is to determine among these techniques the most suitable to obtain solid solutions with high chemical homogeneity and high sinterability. Th…
This paper proposes a new membrane stress based model to predict the draping of woven fabrics over irregular surfaces. It has been well established that pure shear is the main mechanism allowing a woven fabric to conform to double curvature shapes. Although the kinematic drape models developed on this principle serve…
A process for synthesis of ZrO 2 based ceramics by coprecipitation, for application in solid oxide fuel cell is described. Precursors preparation, precipitate treatment by azeotropic distillation and ceramic processing are also presented. Zirconia powders containing 3 and 9 mol% of Y 2 O 3 and other additives such as…
The corrosive behavior of zinc in HCl solution containing various concentrations of glutaraldehyde GTD, glycine GLN, methionine MTN, and their condensation products formed between GTD + GLN (CP1) and GTD + MTN (CP2) was investigated. The corrosion-inhibitive action of these compounds on zinc metal was studied using ch…
Raman spectroscopy was employed for studies of the thermal degradation of poly(vinyl chloride). Intensity enhancement of vibrations belonging to conjugated double bond sequences in the corresponding spectra allowed the detection of degradation at the very first stage. In this initial period, the kinetics of degradatio…
Abstract The electrochemical behaviour of Nd‐Fe‐B magnetic alloys was investigated in acid and neutral solutions. The differences in the chemical composition of these materials have distinct influence on the corrosion rate and polarization behaviour. Small additions of cobalt, aluminium and gallium increase the corros…
Bimetallic cobalt–samarium nanoparticles are prepared in the gas phase using a combined laser vaporization-rare gas condensation source and subsequently deposited on various substrates or embedded in non-magnetic metallic matrix using the Low Energy Cluster Beam Deposition technique (LECBD). Structural and magnetic ch…
Amorphous Al 2 O 3 –37.5% Y 2 O 3 powders, prepared using spray pyrolysis followed by partial or complete thermal decomposition, were hot‐pressed at 315°–640°C and 500 or 750 MPa uniaxial pressure. Hot pressing of fully decomposed amorphous powder at 450°–640°C at pressures up to 750 MPa led to densification (up to 96…
Well-aligned nitrogen-doped multiwall carbon nanotube arrays have been successfully grown over large areas on quartz and silicon wafers by floating-catalyst chemical vapor deposition at low temperatures (600 degrees C). These nitrogen-including nanotubes, derived from pyridine-ferrocene mixtures, have smaller outer di…