Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Light amplification in DNA systems is a promising technique for efficient and compact photonics devices in the future. Since highly fluorescent properties for hemicyanine dyes are caused by the interaction with DNA or a DNA-complex, their effects on basic optical properties were elaborated in phases of solution and so…
Abstract In a conventional semi‐batch seeded emulsion copolymerization of vinyl acetate/butyl acrylate (VA/BA) using hybrid surfactants namely, dioctyl sulfosuccinate (DOSS) as an anionic surfactant, nonylphenol ethoxylate (KENON 30) as a non‐ionic type, and polydimethylsiloxane surfactant (having hydrophilic silanol‐…
Abstract The effect of Mg 2 Si amount on the properties of Al–Mg 2 Si as‐cast composites was investigated in this study. Composites with different amounts of Mg 2 Si (15 wt%, 20 wt% and 25 wt%) were fabricated, and the fluidity, viscosity, porosity formation and tensile properties were then analyzed. In addition, opti…
Four-point electrical resistivity measurements were carried out on Nd metal and dilute magnetic alloys containing up to 1 at.% Nd in superconducting Y for temperatures 1.5--295 K under pressures to 210 GPa. The magnetic ordering temperature ${T}_{\text{o}}$ of Nd appears to rise steeply under pressure, increasing nine…
Eighty percent heavy cold thickness reduction and reversion transformation in the temperature range 700–950 °C for 60 s were performed to obtain the reverted ultrafine-grained (UFG) structure in 304 austenitic stainless steel. Through mechanical property experiments and transmission electron microscopy (TEM) of micro…
Phosphorus-doped soft carbon was synthesized by a facile phosphoric acid-assisted route. It is found that the phosphorus-doped soft carbon used as lithium ion battery anode exhibits a high reversible capacity of 333.6 mA h g –1 with the first cycle coulombic efficiency of 87.0% at the current density of 30 mA g –1 . W…
Experimental results are summarized on the P – T – m diagram. In pure [C 3 mim][I], amorphous phase appeared both at low-temperature and high-pressure. Stoichiometric [C 3 mim][I 3 ] promotes crystallization, while non-stoichiometric [C 3 mim][I 3.66 ] indicates anomalies.
The polymorphic phase of 1,3,5-trinitro-1,3,5-triazine (RDX) was examined as a function of mass loading, solvent, and sample deposition technique. When RDX was deposited at a high mass loading, the vibrational modes in the obtained Raman spectra were indicative of concomitant polymorphism as both the α-RDX and β-RDX p…
Novel electrode structure in a DBD reactor applied to the degradation of phenol in aqueous solution, MERCADO-CABRERA, Antonio, PEÑA-EGUILUZ, Rosendo, LÓPEZ-CALLEJAS, Régulo, JARAMILLO-SIERRA, Bethsabet, VALENCIA-ALVARADO, Raúl, RODRÍGUEZ-MÉNDEZ, Benjamín, MUÑOZ-CASTRO, Arturo E
The integrated model JINTRAC is employed to assess the dynamic density evolution of the ITER baseline scenario when fuelled by discrete pellets. The consequences on the core confinement properties, α -particle heating due to fusion and the effect on the ITER divertor operation, taking into account the material limitat…
We here describe the construction of a highly sensitive and selective all-solid-state phosphate electrode based on polyaniline and H 3 PO 4 doped polyaniline. The polyaniline layer was electroplated on the gold substrate with Chronoamperometry method and was in-situ doped by H 3 PO 4 . The Scanning Electron Microscopy…
All soils and rocks contain naturally occurring radioactive materials (NORM). Many ores and raw materials contain relatively elevated levels of natural radionuclides, and processing such materials can further increase the concentrations of naturally occurring radionuclides. In the U.S., these materials are sometimes r…
Experimental data up to 463.1 K and 269.14 MPa are revealed for binary and ternary mixtures of poly(phenyl methacrylate) [P(PhMA)] + carbon dioxide (CO 2 ) + phenyl methacrylate (PhMA) and P(PhMA) + CO 2 + dimethyl ether (DME) systems. The cloud-point pressure for the P(PhMA) + CO 2 + PhMA system is measured with the…
The colorimetric chemosensor 2‐((3,5‐dichloro‐2‐hydroxybenzylidene)amino)‐3′,6′‐dihydroxy‐6‐methyl‐4‐(p‐tolyl)spiro[benzo[f]isoindole‐1,9′‐xanthen]‐3(2H)‐one (BFFSH) derived from benzo[f]fluorescein dye was synthesized. NMR and IR spectroscopy as well as mass spectrometry were used to confirm the compound. BFFSH shows…
For resolving deficiencies of conventional tension measurement methods, this paper proposes a novel eddy current sensor with a single-coil structure based on the inverse magnetostrictive effect. An inductor–resistor–capacitor (LRC) model of eddy current sensor, which considers more parameters than the traditional indu…
Amorphous indium gallium zinc oxide (a-IGZO) powder was prepared by typical solution-based process and post-annealing process. The sample was used as sensor for detecting C₂H₅OH, H₂, and CO. Gas-sensing performance was found to be highly sensitive to C₂H₅OH gas in a wide range of concentration (0.5-1250 ppm) with the…
We have studied spatial and temporal dynamic heterogeneity (DH) in a system of hard-sphere particles, subjected to active forces with constant amplitude and random direction determined by rotational diffusion with correlation time $\ensuremath{\tau}$. We have used a variety of observables to characterize the DH behavi…
In recent years the popularity of ecological and renewable materials has grown. Aware of the limited resources as well as availability of local resources and economic grounds, the attention is paid to the development of new materials. Currently, there is a political as well as a societal demand for products that requi…
A cubic shaped copper(II)hexacyanoferrate was prepared by wet chemical method by mixing an equimolar concentration of CuCl 2 with K 3 [Fe(CN) 6 ] 2 in the presence of poly(diallyldimethylammonium chloride) (PDDA). The X-ray diffraction, field emission scanning electron microscopy, elemental analysis, Fourier transform…
Protein cross-linking mass spectrometry (CL-MS) enables the sensitive detection of protein interactions and the inference of protein complex topology. The detection of chemical cross-links between protein residues can identify intra- and interprotein contact sites or provide physical constraints for molecular modeling…