Hiroyoshi Soezima1986-01-01Hyomen Kagaku
Quantitative analysis by electron probe microanalyzer has been well studied and established. Many methods of quantitative analysis are provided. 1. Working curve method, 2. ZAF method and 3. Bence-Albee method are well known and used. But these methods are not suited to some specimens. 4. Convergence method and 5. SEF…
Electron and X-Ray Spectroscopy TechniquesSurface and Thin Film PhenomenaAdvanced Materials Characterization Techniques
Akiyoshi Osaka、Hidemasa Oda、Katsuaki Takahashi1986-01-01Journal of the Ceramic Association Japan
The molar volume, optical basicity, X-ray fluorescence spectra of Al Kα and X-ray photoelectron spectra of O1s, B1s and Al2p core electrons were measured for alkaline earth aluminoborate (CaBAl and BaBAl) glasses as a function of molar ratio MO/(MO+B2O3)=X (M=Ca and Ba). Inflections and discontinuities in the property…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsPhase-change materials and chalcogenides
Milan Pospı́šil、Jan Topinka1986-01-01Collection of Czechoslovak Chemical Communications
The kinetics of the reduction by hydrogen of two series of NiO-Fe 2 O 3 mixed oxides of different composition was studied in the temperature range 320 - 410 °C using thermogravimetry. Both series were prepared from different precursors that were thermally decomposed at different temperatures. The oxidizing ability of…
Metal Extraction and BioleachingIron oxide chemistry and applicationsThermal and Kinetic Analysis
W. Lamar Griffin、Walter Adrian Hendrix1986-01-01IEEE Transactions on Industry Applications
The state of the art of microwave heating and drying of textile materials is discussed, along with the potential for this technology to improve the productivity of the textile industry. A complete search of the literature has revealed the important research and development which has been performed related to microwave…
Dyeing and Modifying Textile FibersTextile materials and evaluations
Kazuo Toyama、Takashi Maeda1986-01-01Transactions of the Iron and Steel Institute of Japan
The effect of heat treatment on the tensile properties and fracture toughness of Ti-10V-2Fe-3Al, a near β titanium alloy, was studied to establish the optimum manufacturing process. Fatigue properties were also investigated using heat treated specimens specified by Aerospace Material Specifications.It is found that ag…
Metal and Thin Film MechanicsIntermetallics and Advanced Alloy PropertiesTitanium Alloys Microstructure and Properties
Gunnar Raade、Christian Rømming1986-01-01Zeitschrift für Kristallographie
The crystal structure of ε -Mg 2 PO 4 OH ( Pnma , a = 8.239(1), b = 6.135(1), c = 7.404(1) Å, Z = 4) was solved by direct methods and Fourier syntheses and refined to a final R -value of 0.017 for 637 high-angle reflections. Slightly distorted trans -MgO 4 (OH) 2 octahedra form chains along b by edge-sharing, the chai…
Crystal Structures and PropertiesNuclear materials and radiation effectsCrystallography and Radiation Phenomena
Steven W. Webb、D. A. Stanley、Bernard J. Scheiner1986-01-01Particulate Science And Technology
As part of its program in mineral waste management, the Bureau of Mines has investigated the effect of ion exchange on the dewatering potential of clay minerals. Clays of the smectite group possess exchangeable cations to compensate for the overall net negative charge of the clay lattice. The ratio of the valence of t…
Groundwater and Isotope GeochemistrySoil and Unsaturated FlowClay minerals and soil interactions
Muneo Izumikawa、Tohru Mitani、Takashi Niioka1986-01-01TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
The flame spread rates of paper sheets, in which powder retardants were applied, were measured. Retardant compounds utilized were NaHCO3, Na2CO3, water, urea, NH4H2PO4, and HPO3. This paper forcuses mainly on the effectiveness of NaHCO3. As NaHCO3 content in the paper sample increased, the spread rate (2.5 mm/s) by fl…
Fire dynamics and safety researchFlame retardant materials and properties
R. P. Taubinger、Michael W. Allsopp、H.J.M Vander Loo 等 4 位作者1986-01-01Polymer Testing
This paper describes a straightforward, well-defined heat stability test for stabilised or unstabilised PVC powder in which a sample is heated in a U-tube in a controlled environment and the quantity of HCl generated measured using a conductivity cell. As long as the prescribed precautions are followed the method has…
Polymer Science and PVC
CK Carniglia、TT Hart、MC Staggs1986-01-01OpenAlex
Previous experiments have demonstrated that halfwave overcoats of a low-index coating material are effective in increasing the damage thresholds of dielectric high reflector coatings (HR's) at the wavelengths of 1064 nm and 248 nm. This overcoat layer led to a 50% increase in damage threshold at 1064 nm and to a 100%…
Optical Coatings and GratingsSilicone and Siloxane ChemistryStructural Analysis of Composite Materials
S. Mardix1986-01-01Bulletin de Minéralogie
Les cristaux de ZnS obtenus à partir de la phase vapeur à environ 1450°C ont la structure hexagonale 2H. Des transformations à l'état solide au cours du refroidissement sont à l'origine des polytypes observés, dont une liste est donnée. La stabilité de la température et de la pression au cours de la croissance est une…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin Films
G. D. Danilatos1986-01-01Scanning
Abstract The backscattered electron (BSE) signals detected by a pair of detectors in the SEM can be used for producing colour micrographs. The image corresponding to any of these signals, or to a mixture of these signals, is assigned one primary colour and two or more of these images are superimposed onto the same col…
Advancements in Photolithography TechniquesNuclear Physics and ApplicationsElectron and X-Ray Spectroscopy Techniques
Dorothy M. Duffy、P. Tasker1986-01-01Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
The predicted and calculated configurations of the [001] twist boundaries in rocksalt-structured oxides have been reanalysed in terms of arrays of screw dislocations. The dislocation model is then used to predict the structure of all [001] twist boundaries in these oxides. A computer simulation confirmed the stability…
Nuclear materials and radiation effectsElectronic and Structural Properties of OxidesX-ray Diffraction in Crystallography
Woei‐Ping Fang、Chien‐Hong Cheng1986-01-01Journal of the Chemical Society Chemical Communications
Catalytic reductions of N2O and NO by CO to N2 can be achieved at 100 °C in solutions containing Rh2(CO)4Cl2 and a base: the highest rate for the N2O reduction of 25.2 turnovers per hour in dimethyl sulphoxide was obtained using KOH as the base.
Catalytic Processes in Materials ScienceAmmonia Synthesis and Nitrogen ReductionNanomaterials for catalytic reactions
Andreas Krell、Eckhard Pippel、Jörg Woltersdorf1986-01-01Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties
Experiments on Al2 + ZrO2 ceramics reveal higher Young′s moduli and fracture toughness after sintering in air then in hydrogen. Since X-ray measurements showed a higher monoclinic phase content in the air-sintered material, Young′s moduli of these ceramics indicate the existence of higher residual stresses associated…
Advanced ceramic materials synthesisAdvanced materials and compositesPowder Metallurgy Techniques and Materials
G.L. Hofman、A.G. Hins、David Porter 等 5 位作者1986-01-01University of North Texas Digital Library (University of North Texas)
The combination of metallic fuel and stainless steel cladding in a fuel element forms a complex multicomponent diffusion couple at elevated temperatures. Interdiffusion of fuel and cladding components can in principle lead to several phenomena that could affect the reliable performance of a fuel element. These phenome…
Nuclear reactor physics and engineeringHigh Temperature Alloys and CreepNuclear Materials and Properties
David A. Wesley、M. M. Yovanovich1986-01-01Nuclear Technology
A new relationship for predicting the gaseous gap conductance between the fuel and clad of a nuclear fuel rod is derived. This relationship is derived from purely analytical considerations and represents a departure from approaches taken in the past. A comparison between the predictions from this new relationship and…
Nuclear reactor physics and engineeringNuclear Materials and PropertiesNuclear and radioactivity studies
Isao Kojima、Natsuo Fukumoto、Masayasu Kurahashi1986-01-01BUNSEKI KAGAKU
ガウス-ローレンツ複合関数に非対称項を導入し,X線光電子スペクトルの波形を解析した.非線形最小二乗法によりスペクトルのカーブフィッティングを行ったところ,ガウス-ローレンツ関数は高度の適合性を示し,白金でモリブデンの金属成分の非対称なピークや酸化状態による対称性の高いピークのいずれに対してもよく表すことができた.更に,最小二乗法におけるパラメーター間の制約について検討を加えた.
X-ray Spectroscopy and Fluorescence AnalysisElectron and X-Ray Spectroscopy TechniquesCrystallography and Radiation Phenomena
Alan R. Battersby、Kevin Cardwell、Finian J. Leeper1986-01-01Journal of the Chemical Society Perkin Transactions 1
The synthesis is described of a porphyrin alcohol (22) which has a structure very similar to that of porphyrin a(2). The model porphyrin was resolved by separation of its camphanate esters. Ozonolysis of the 2-nitrobenzoate of each enantiomer in tritiated form gave a derivative of 2-hydroxypentanedioic acid whose conf…
Supramolecular Chemistry and ComplexesPorphyrin and Phthalocyanine ChemistryPorphyrin Metabolism and Disorders
M.R. Louthan1986-01-01Materials Characterization
Abstract Optical metallography, one of the most common materials characterization techniques, uses visible light to magnify structural features of interest. This article discusses the use of optical methods to evaluate micro and macrostructure and relate it to process conditions and material behavior. It covers the st…
Electron and X-Ray Spectroscopy TechniquesMetal Alloys Wear and PropertiesAdvanced Materials Characterization Techniques