Keisuke NAGATA、Masahiro ARAI、Keita Goto2017-01-01The Proceedings of Conference of Hokuriku-Shinetsu Branch
In the present paper, an alternative numerical approach based on distinct element method (DEM) for thin-walled structures' impact collapse analyses was proposed. Starting from the equilibrium equation for the thin plate bending, new element for bending and twisting deformation has been introduced in DEM. Furthermore,…
Structural Response to Dynamic LoadsHigh-Velocity Impact and Material BehaviorFluid Dynamics Simulations and Interactions
А.С. Корнющенко、В.И. Перекрестов、В.В. Наталич 等 4 位作者2017-01-01Письма в журнал технической физики
Предложен способ получения наносистем Zn при конденсации слабопересыщенных паров на систему мембрана анодно-окисленного алюминия (АОА) --- подложка (Si). Для эффективного проникновения паров Zn в глубь пор АОА параллельно образующим пор формировался направленный паровой поток, при этом температура внешней поверхности…
Anodic Oxide Films and NanostructuresMetallurgical and Alloy ProcessesNanomaterials and Printing Technologies
А.И. Вейнгер、Т.В. Тиснек、И.В. Кочман 等 4 位作者2017-01-01Физика и техника полупроводников
Рассмотрен магниторезистивный эффект в полупроводнике HgSe : Fe в слабых магнитных полях на микроволновых частотах при низких температурах. Проанализированы отрицательная и положительная составляющие магнитопоглощения, основой которого является эффект магнитосопротивления в вырожденной зоне проводимости. Отмечены особ…
Advanced Materials and Semiconductor TechnologiesChemical and Physical Properties of MaterialsGraphic Design and Typography
А.С. Леньшин、П.В. Середин、И.В. Кавецкая 等 5 位作者2017-01-01Физика и техника полупроводников
Исследованы особенности осаждения органического красителя Родамин Б на поверхность пористого кремния со средним размером пор 50-100 и 100-250 нм. Методами инфракрасной и фотолюминесцентной спектроскопии были исследованы особенности состава и оптических свойств полученных систем. Установлен преимущественно физический т…
Polymer Science and ApplicationsAdvanced ceramic materials synthesisSemiconductor materials and interfaces
Н.В. Крыжановская、Ю.С. Полубавкина、В. Н. Неведомский 等 9 位作者2017-01-01Физика и техника полупроводников
Исследованы структурные и оптические свойства слоев GaP и GaPN, синтезированных методом молекулярно-пучковой эпитаксии на подложках Si (100), разориентированных на 4o. Показана возможность получения буферных слоев GaP, обладающих высокой планарностью гетероинтерфейсов с плотностью выходов дислокаций на поверхность не…
Nanowire Synthesis and ApplicationsSemiconductor Quantum Structures and DevicesAdvanced Materials and Semiconductor Technologies
T. Saravana Kumaran、S. Parveen Banu、Ch. Satya Kamal 等 4 位作者2017-01-01Asian Journal of Chemistry
Asian Journal of Chemistry, a Multidisciplinary Chemistry Journal is an Peer Reviewed International Journal and publishes from India. The journal has been established since January 1989 on a firm foundation of International Quality Research. This Journal encompasses all branches of chemistry and its sub – disciplines…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin FilmsCopper-based nanomaterials and applications
Meina Huang、Shuiwen Yang2017-01-01Asian Journal of Chemistry
Asian Journal of Chemistry, a Multidisciplinary Chemistry Journal is an Peer Reviewed International Journal and publishes from India. The journal has been established since January 1989 on a firm foundation of International Quality Research. This Journal encompasses all branches of chemistry and its sub – disciplines…
Corrosion Behavior and InhibitionCarbon dioxide utilization in catalysisbiodegradable polymer synthesis and properties
В. С. Жигалов、В.Г. Мягков、Л. Е. Быкова 等 6 位作者2017-01-01Physics of the Solid State
Представлены результаты исследования структурных и магнитных свойств пленок Fe87Pt13, синтезированных с использованием твердофазных реакций, и композитных пленок Fe87Pt13-Al2O3, полученных с помощью метода алюмотермии. Показано, что в синтезированных образцах обоих типов присутствует вращающаяся магнитная анизотропия,…
Electron and X-Ray Spectroscopy TechniquesAdvanced Materials Characterization TechniquesCatalysis and Oxidation Reactions
A.A.M. Ezanuddin、A. H Ismail2017-01-01MATEC Web of Conferences
This research paper describes the steps used to design an alternative metasurface which is based on Circular Complementary Split Ring (CCSR) formation at 5.8 GHz. All the 3D modelling was conducted using specialized EM simulation software that utilizes Eigen algorithm to solve different frequency modes that can resona…
Antenna Design and AnalysisAdvanced Antenna and Metasurface TechnologiesMetamaterials and Metasurfaces Applications
Voelker Michelle2017-01-01Figshare
Thesis including three papers on cast metal surface inspection standards: Risk assessment for visual inspection, new digital standard, slicing method for determining underlying geometry, subsampling method for determining underlying geometry, proposal for automated inspection tool.
Material Selection and PropertiesSurface Roughness and Optical MeasurementsEngineering and Materials Science Studies
Anato Sachenko、В. П. Костылев、I. O. Sokolovskiĭ 等 7 位作者2017-01-01Письма в журнал технической физики
Рассмотрена специфика формирования темновых ВАХ I(V) гетеропереходных солнечных элементов на основе alpha-Si : H/Si с учетом соотношения между уровнем легирования кремния Nd и величиной избыточной концентрации электронно-дырочных пар Delta n. Показано, что при Delta n≥ Nd ВАХ принципиально отличается от ВАХ классическ…
Semiconductor materials and interfacesAdvanced Energy Technologies and Civil Engineering InnovationsAdvanced Materials and Semiconductor Technologies
Hanchi Zhu2017-01-01OpenCommons at University of Connecticut (University of Connecticut)
The demand for manufactured panels for construction, furniture and other applications place strains on the forestry industry leading to deforestation. Similarly, one component of the very large waste stream from construction and renovation is post consumer carpet. The post consumer carpet waste and widely available wa…
Electrospun Nanofibers in Biomedical ApplicationsAdvanced Cellulose Research Studiesbiodegradable polymer synthesis and properties
Tomoyuki Mannen、Issei Fukasawa、Hideaki Fujita2017-01-01IEEJ Transactions on Industry Applications
This paper proposes a new control method suitable for active power filters, which can reduce the dc capacitor voltage ripple associated with the third-order harmonic current compensation. The proposed method superimposes a negative-sequence fundamental current on the compensating current to cancel out the active power…
Electromagnetic Compatibility and Noise SuppressionPower Quality and HarmonicsMagnetic Properties and Applications
Dongli Zhang、Mingxiang Wang、Man Wong 等 4 位作者2017-01-01Chinese Physics B
Crystallization of amorphous silicon (a-Si) which starts from the middle of the a-Si region separating two adjacent metal-induced crystallization (MIC) polycrystalline silicon (poly-Si) regions is observed. The crystallization is found to be related to the distance between the neighboring nickel-introducing MIC window…
Silicon and Solar Cell TechnologiesSilicon Nanostructures and PhotoluminescenceThin-Film Transistor Technologies
В.А. Ромака、P. Rogl、В.В. Ромака 等 7 位作者2017-01-01Физика и техника полупроводников
Исследованы кристаллическая и электронная структуры, энергетические, кинетические и магнитные характеристики полупроводника n-HfNiSn, сильно легированного акцепторной примесью Y, в диапазонах: T=80-400 K, NAY~1.9·1020-5.721 см-3 (x=0.01-0.30) и H≤10 кГс. Установлена природа механизма генерирования структурных дефектов…
Semiconductor materials and interfacesAdvanced Thermoelectric Materials and DevicesHeusler alloys: electronic and magnetic properties
Junling Zhao、G. R. Hamed2017-01-01Rubber Chemistry and Technology
ABSTRACT Conventional sulfur-vulcanized natural rubber gums containing various antioxidants have been subjected to oxidative stress relaxation at 72 °C and 25% strain. Oxidation is diffusion controlled, even for samples as thin as 0.15 mm. Assuming that the rate of chain scission is proportional to the rate of oxygen…
Lubricants and Their AdditivesLignin and Wood ChemistryPolymer Nanocomposites and Properties
Felix Pyatkov2017-01-01Technischen Universität Darmstadt
In this work proof-of-concept devices with light-emitting electrically driven carbon nanotubes (CNTs) integrated in nanophotonic environments are presented. Electroluminescent and incandescent CNTs can be envisioned as waveguide-integrated light sources for future on-chip data communication due to their unique structu…
Photonic and Optical DevicesMechanical and Optical ResonatorsCarbon Nanotubes in Composites
V. L. Tang、Борис Булгаков、Olga Aleksandrova2017-01-01Vestnik MGSU
Аннотация.Бетонные конструкции, эксплуатируемые в тоннелях метро и других подземных сооружениях, как правило, находятся в непосредственном контакте с грунтовыми водами, содержащими твердые частицы горных пород (например: ил, песок, гравий и другие твердые вещества), что приводит к снижению их прочности и долговечности…
Material Properties and ApplicationsInnovations in Concrete and Construction Materials
А.Л. Семенов2017-01-01Physics of the Solid State
Теоретически исследован фотоиндуцированный фазовый переход полупроводник-металл, протекающий за время Delta t<1 ps в поверхностном слое пленки двуокиси ванадия на алюминиевой подложке. Рассмотрен нетепловой механизм развития неустойчивости. Показано, что в пленке VO2 образуется гетерофазная структура, содержащая метал…
Transition Metal Oxide NanomaterialsCopper-based nanomaterials and applicationsSurface Treatment and Coatings
В. И. Вальков、V. I. Kamenev、В.И. Митюк 等 6 位作者2017-01-01Physics of the Solid State
В рамках феноменологической модели взаимодействующих параметров магнитного и структурного порядков проведен анализ магнитных и структурных переходов в магнитокалорических сплавах системы Mn1-xCrxNiGe. На основе рассчитанных изобарических температурных зависимостей параметров магнитного и структурного порядков предсказ…
Shape Memory Alloy TransformationsMagnetic and transport properties of perovskites and related materialsMetallurgical and Alloy Processes