Nowshad Amin、Jamilah Husna、Mohammad Mezbaul Alam2017-01-01OpenAlex
Zinc Oxide (ZnO) is a prominent photovoltaic material used as either buffer or window layers in Copper-Indium-Gallium-Sulfide (CIGS) or Cadmium-Telluride (CdTe) thin film solar cells. In this chapter, ZnO will be explored from the material point of view to the thin film growth and characterization, leading to applicat…
Copper-based nanomaterials and applicationsChalcogenide Semiconductor Thin FilmsZnO doping and properties
Y. Babenko、M. Schneider、A. Gebhardt2017-01-01wt Werkstattstechnik online
In der vorliegenden Arbeit wird eine empirische Untersuchung zum trockenen Trennschleifen von kohlenstofffaserverstärktem Kunststoff (CFK) vorgestellt. Im Mittelpunkt steht das Ermitteln der Zusammenhänge zwischen Prozessparametern und der Wärmeentstehung sowie resultierenden Temperaturen in der Schleifzone. Darüber h…
Advanced machining processes and optimizationAdvanced Surface Polishing TechniquesMetal Alloys Wear and Properties
I. Del Campo、I. Alegría、Mercedes Munárriz 等 16 位作者2017-01-01ETA Florence
Biofuels are considered to be the most promising substitutes for the decarbonisation of the transport sector, especially heavy road and air transport. For this reason new and more sustainable drop-in biofuel alternatives are being pursued with the aim of overcoming the current challenges and limitations exhibited by 1…
Machine Learning in Materials Science
L.G. Eliseev、S. E. Lysenko、A. V. Melnikov 等 6 位作者2017-01-01The scientific electronic library of periodicals of the National Academy of Sciences of Ukraine (National Academy of Sciences of Ukraine)
The new findings in the behavior of geodesic acoustic modes (GAMs) and turbulent particle flux dynamics on the T-10 tokamak are presented. For the first time in T-10 the broadband oscillations (<250 kHz) of electric potential and density in Ohmic and ECRH regimes (Bt = 1.6…2.4 T, Ipl = 0.15…0.3 MA, n‾e = (0.6…5)×10¹⁹…
Fusion materials and technologiesMagnetic confinement fusion researchSuperconducting Materials and Applications
None Available2017-01-01OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)
CoP is Modderite structured and crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. Co3+ is bonded to six equivalent P3- atoms to form a mixture of distorted face, edge, and corner-sharing CoP6 octahedra. The corner-sharing octahedra tilt angles range from 47–59°. There are a spread…
High Temperature Alloys and CreepX-ray Diffraction in CrystallographyAluminum Alloy Microstructure Properties
Christopher Svoboda2017-01-01OhioLink ETD Center (Ohio Library and Information Network)
Strong correlations and strong spin-orbit coupling are important areas of research in condensed matter physics with many open questions.Transition metal oxides provide a natural way to combine these strong correlations and strong spin-orbit coupling in electronic systems.Iridium compounds in the d 5 configuration (Ir…
Catalysis and Oxidation ReactionsMagnetic and transport properties of perovskites and related materialsCatalytic Processes in Materials Science
Thomas M. Llewellyn-Jones、Bruce D. Drinkwater、Richard S. Trask2017-01-01Bristol Research (University of Bristol)
3D printed dogbone samples were manufactured with ultrasonically assembled glass microfibre reinforcement, and subsequently loaded in tension to failure. The change in tensile modulus and ultimate tensile strength were determined with respect to the angle between fibre orientation and the loading axis.
Additive Manufacturing and 3D Printing TechnologiesMaterial Properties and ApplicationsEngineering Technology and Methodologies
Sukanya Häg Mameng、Claes Tigerstrand、Tobias Larsson 等 5 位作者2017-01-01Report
Duplex stainless steel (DSS) usage in bridge construction has increased significantly in the last twenty years because of the material’s exceptional mechanical properties, good corrosion resistance, negligible need of maintenance and thereby low life cycle costs. Three suitable DSS grades used in bridge structures are…
Corrosion Behavior and InhibitionStructural Integrity and Reliability AnalysisConcrete Corrosion and Durability
Е. А. Флерова2017-01-01Problems of fisheries
Esox lucius. , , , , .
Material Properties and Applications
Н.Б. Сененко、Storozhenko, D.、Senenko, A.2017-01-01Digital Repository of Ostroh Academy (Ostroh Academy)
The results of experimental studies of soil properties in area that was contaminated following the disaster at drilling of the gas-bearing-well at oil and gas production facility are represented. The local population uses this soil for agricultural purposes. Conclusions on the impact of emergency on the state of soil,…
Geotechnical and Geomechanical EngineeringStructural mechanics and materialsAdvanced Scientific Techniques and Applications
Luca Bonfiglio、Stefano Gaggero、Aldo Papetti 等 5 位作者2017-01-01UPCommons institutional repository (Universitat Politècnica de Catalunya)
Two types of numerical simulations for the hydrodynamic solution of water entry problems are performed and systematically compared in order to highlight their peculiarities: a viscous Unsteady Reynolds Averaged Navier Stokes (URANS) based on Volume of Fluid (VoF) approach and a meshless Smooth Particle Hydrodynamics (…
Fluid Dynamics Simulations and InteractionsGeotechnical Engineering and Underground StructuresHigh-Velocity Impact and Material Behavior
Tingting Zhang、Meng Cheng、Rong Yang 等 4 位作者2017-01-01Acta Physica Sinica
Graphene nanostructures with defined edges are proposed as a promising platform for the realization of nano-electronics and spin-electronics. However, patterned graphene nanostructure can lead to extra damage and drastically reduce its charge carrier mobility due to the edge disorder. The high flexibility of a top-dow…
Graphene research and applications
Jianwen Chen、Wujun Chen、Mingyang Wang 等 7 位作者2017-01-01UPCommons institutional repository (Universitat Politècnica de Catalunya)
This paper concerns the fracture failure and bias tearing strength criterion for a PVDF coated bi-axial warp knitted fabrics (BWKFs) widely used in air supported membrane structures (ASMSs). Central slit tearing tests were carefully conducted on bias specimens with seven off-axis angles, and the corresponding tearing…
Textile materials and evaluationsMechanical Behavior of CompositesMechanical stress and fatigue analysis
Qlin Zhang、Yunting Li2017-01-01UPCommons institutional repository (Universitat Politècnica de Catalunya)
In this paper the mechanical properties degradation of aged coated fabrics is investigated. Tests on the tension strength and the tearing strength of the aged fabrics are carried out, which is from the membrane roof of Qingdao Stadium used for more than 13 years. The strength degradation degrees of the aged fabrics ar…
Textile materials and evaluationsMaterial Properties and Processing
Monireh Bakhshpour、Emel Tamahkar、Müge Andaç 等 4 位作者2017-01-01Journal of Chromatography A
The potential of the modified bacterial cellulose (BC) nanofibers was determined bearing metal ion coordination interactions to enhance the protein adsorption and binding capacity. Thus, a household synthesized metal chelating monomer, namely N-methacryloyl-l-histidine methylester (MAH), and a commercial metal chelati…
Electrohydrodynamics and Fluid DynamicsAdvanced Cellulose Research StudiesElectrospun Nanofibers in Biomedical Applications
Fatih Toptan、L.A. Rocha2017-01-01IGI Global eBooks
One of the biggest motivations behind the development of the metal matrix composites (MMCs) is the improvement of the mechanical wear resistance of the unreinforced metallic matrix material mainly by the load-bearing effect of the hard reinforcement phases. However, in a large number of applications, MMCs are also req…
Corrosion Behavior and InhibitionAluminum Alloys Composites PropertiesAdvanced materials and composites
Metehan Erdoğan、Abdelrahman Sultan、İshak Karakaya2017-01-01AYBU AVESIS
P-5 (5%Cr) steel is used in the construction of high temperature industrial equipment that works in the flue gas environment because of its high corrosion resistance. However, there are studies reporting higher oxidation rates of Cr containing steels in moist environments when compared to oxidation in air. In order to…
Metal Alloys Wear and Properties
Abdi Atılgan、Hatice Ulusoy、Hüseyin Peker2017-01-01DergiPark (Istanbul University)
Araştırmada, çevreyle dost ahşap doğal boyası üretilmesi hedeflenmiştir. Çay boyası ISO 1574 -TS 1563 ‘göre hazırlanmış; ASTM D 1413-76 (1976)’na bağlı kalınarak emprenye muamelesi yapılmıştır. Bu amaçla sarıçam ve doğu kayını odununa doğal çay boyası/ su bazlı vernik uygulaması gerçekleştirilmiştir. Eğilme direnci ve…
Dyeing and Modifying Textile FibersTextile materials and evaluations
Mihriban Kalkancı2017-01-01Pamukkale University Open Access Archive (Pamukkale University)
Türkiye’de; ihracat rakamları, istihdam değerleri ve üretim miktarları açısından tekstil ve hazır giyim sektörü, en önemli sektörlerinden birisidir ve ihracat gelirlerinin yaklaşık olarak %22’sıni karşılamaktadır. Tekstil ve hazır giyim sektöründe yaklaşık 2 milyon kişi çalışmaktadır. Sektörün büyüklüğü ile paralel ol…
Textile materials and evaluations
Hamdy Ibrahim2017-01-01OhioLink ETD Center (Ohio Library and Information Network)
Magnesium (Mg) alloys have shown biodegradable properties that make them appealing for various biomedical applications.Mg corrodes gradually in the body and it has low density and modulus of elasticity, close to that of the bone.However, the fast rate of degradation and low strength are the main challenges that hinder…
Surface Treatment and CoatingsMagnesium Alloys: Properties and ApplicationsBone Tissue Engineering Materials