A. Yu. Stakheev、Yu. M. Shul’ga、N. A. Gaidai 等 7 位作者2001-01-01Mendeleev Communications
Analysis of the Pt 4f line asymmetry evidenced that the suppression of the hydrogenation activity of Pt/TiO2 in the SMSI state is caused by a decrease in the d-electron density at the Fermi level of platinum particles, while the net charge of the metal particles remains unaltered.
Advanced Chemical Physics StudiesElectrocatalysts for Energy ConversionCatalytic Processes in Materials Science
Toshihiro Nakamura、Kunihide Tachibana2001-01-01Japanese Journal of Applied Physics
The vibrational spectra of the chemical vapor deposition (CVD) source molecules used for the deposition of (Ba,Sr)TiO 3 films were investigated by density functional theory (DFT) calculations. On the basis of the DFT calculations, we revised a part of the traditional assignments of the infrared spectral peaks. The spe…
Catalytic Processes in Materials ScienceCatalysis and Oxidation ReactionsThermal and Kinetic Analysis
Robert Hunter、Peter D. Turner、Stephen Rimmer2001-01-01Journal of Materials Chemistry
The poly(Friedel–Crafts) reaction between benzene-1,2,4,5-tetracarboxylic dianhydride and diphenyl ether gave carboxylic acid functional polyarylates (PEKK-COOH) that were soluble in polar solvents such as NMP and DMF. The carboxylic acid functional polymers were thermally stable up to 400 °C. PEKK-COOHs in DMF or NMP…
Epoxy Resin Curing ProcessesSynthesis and properties of polymersSilicone and Siloxane Chemistry
Jonathan L. Sessler、Sergiy V. Shevchuk、Wyeth B. Callaway 等 4 位作者2001-01-01Chemical Communications
The synthesis and X-ray structure of a C2 symmetric secochlorin 2, obtained by a photosensitized oxidative ring opening of a 2,3-dimethoxy porphyrin, is described.
Porphyrin and Phthalocyanine ChemistryPhotodynamic Therapy Research StudiesPorphyrin Metabolism and Disorders
Won-Wook Park、Bong‐Sun You、Byoung-Gi Moon 等 4 位作者2001-01-01Science and Technology of Advanced Materials
Mg–Al–Si–Ca and Mg–Zn–Ca base alloys were rapidly solidified bymelt spinning at the cooling rate of about a million K/s. The melt-spun ribbons were aged in the range 100–400%C for 1 h. The effect of additional elements on microstructural change and precipitation hardening after heat treatment was investigated using TE…
Magnesium Alloys: Properties and ApplicationsAluminum Alloy Microstructure PropertiesAluminum Alloys Composites Properties
John L. Lyman、Tetsuji Noda2001-01-01Journal of Physical and Chemical Reference Data
The available data for determining the thermochemical parameters for Si2F6 and SiF4 has been assembled. With this information, the thermochemical functions for Si2F6 and SiF4 have been calculated as ideal gases in the harmonic oscillator approximation. These results are presented in the format of the NIST–JANAF Thermo…
Advanced ceramic materials synthesisThermal and Kinetic AnalysisThermal Expansion and Ionic Conductivity
Erim Bešić、Krešimir Sanković、Vjeran Gomzi 等 4 位作者2001-01-01Physical Chemistry Chemical Physics
Thioanalogs of the nucleic-acid bases are known photosensitive probes and good traps of radiation energy. Radiation-induced sulfur-centered free radicals stabilized on the base thioanalogs molecules are of the cationic origin. Their electronic configuration is of the π type, unless an electron-donating group, like Cl−…
DNA and Nucleic Acid ChemistryInsect and Pesticide ResearchSolid-state spectroscopy and crystallography
Hiroaki Koga、Y. Nakamura、Masahiko WATANABE 等 4 位作者2001-01-01Science and Technology of Advanced Materials
We have performed molecular dynamics simulations of bombardment of graphitic boron nitride (gBN) by energetic boron and nitrogen particles in order to examine the roles of ion bombardment in ion/plasma-assisted deposition of cubic boron nitride (cBN) thin films. We have found that the interaction of the energetic part…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchBoron and Carbon Nanomaterials Research
Agnieszka nbsp Marta Wusatowska-Sarnek、Hiromi Miura、Taku Sakai2001-01-01MATERIALS TRANSACTIONS
Static recrystallization was studied in warm and hot deformed polycrystalline copper (99.99%). Samples were compressed to a strain of 0.25 at 573 K and 723 K at a strain rate of 2×10−1 s−1, quenched in water, and subsequently isothermally annealed at 673 K . Static recrystallization kinetics were found to be faster in…
Microstructure and mechanical propertiesMicrostructure and Mechanical Properties of SteelsMetallurgy and Material Forming
Claire B. Shaeffer2001-01-01Medical Entomology and Zoology
I. APPAREL PRODUCTION. 1. Overview to Apparel Production. 2. Industrial Equipment: Orientation. 3. Basic Machine Skills. 4. Basic Production Skills. 5. Other Industrial Machines. II. BASIC OPERATIONS. 6. Seams, Types, Classifications, and Basic Plain Seams. 7. More Plain Seams. 8. Seam Finishes. 9. Self-finished Seams…
Textile materials and evaluations
Hiroshi Yamamoto、Shigenori Matsumoto、A. Fukuno2001-01-01Journal of the Japan Society of Powder and Powder Metallurgy
Experiments were carried out to investigate the magnetic properties of Sm-Fe-Co-Nb-Zr system nitriding compounds with TbCu7-type structure. Sm8(Fe0.95Co0.05)88.0Nb4.0-xZrx (X=0-4) alloy ribbons were prepared by the single roller rapid-quenching method, and the effects of alloy composition, and conditions of heat-treat…
Hydrogen Storage and MaterialsMagnetic Properties of AlloysSuperconducting Materials and Applications
Satoshi Ohara、Kazuo Mukai、Takehisa Fukui 等 6 位作者2001-01-01Journal of the Ceramic Society of Japan
We report a new sealant material for solid oxide fuel cells (SOFCs) using glass-ceramic. A glass-ceramic based on the CaO-Al2O3-SiO2 system was selected as a sealant because it can be easily molded to give a gastight seal and remains in a solid-like state under typical fuel cell operating conditions. Calcium alumina s…
Advancements in Solid Oxide Fuel CellsCatalysis and Oxidation Reactions
Joseph B. Geddes、Akhlesh Lakhtakia2001-01-01The European Physical Journal Applied Physics
Chiral sculptured thin films (STFs) have unidirectionally periodic electromagnetic constitutive properties and therefore exhibit the circular Bragg phenomenon. The time-domain Maxwell equations are solved using finite difference calculus in order to establish the spatiotemporal anatomy of the action of axially excited…
Metamaterials and Metasurfaces ApplicationsOptical Coatings and GratingsOptical Polarization and Ellipsometry
Mirosław A. Karpierz2001-01-01Acta Physica Polonica A
Optical reorientational nonli neari ty in tw isted nematic li quid crystallin e planar w aveguide is analyzed theoreticall y. It is shown that optical nonlinearity for guided mo des in analyzed w aveguides can be appro ximated by saturation nonlin earity . Predicted nonlinear ity is large enough to observe eects like…
Liquid Crystal Research AdvancementsNonlinear Dynamics and Pattern FormationNonlinear Photonic Systems
Byung-Ho LEE、Yang-Hyun Koo、Dong-Seong Sohn2001-01-01Journal of Nuclear Science and Technology
Characteristics of high burnup UO2 fuel such as threshold burnup for the formation of high burnup microstructure (rim), rim average burnup and rim width were estimated and then the thermal conductivity degradation due to the porous rim region was investigated. The threshold burnup for rim formation was estimated as a…
Fusion materials and technologiesNuclear reactor physics and engineeringNuclear Materials and Properties
Rei-Mei Chou、Chi-Chin Chang、T. Leon Yu 等 5 位作者2001-01-01Polymer International
The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4-butylene-co-ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4-butanediol/ethylene glycol were investigated using differential scanning calorimetry (DS…
Polymer crystallization and propertiesPolymer Nanocomposites and Propertiesbiodegradable polymer synthesis and properties
Takeshi Noda、A. Kohyama、Yutai Katoh2001-01-01Physica Scripta
Recent progress in R&D of SiC fibers and reinforced SiC matrix (SiC/SiC) composites in Japan, especially focusing on the activities of CREST-ACE program, is presented. Firstly, the present status of high performance SiC fiber development, such as Hi-Nicalon Type-S and Tyrano-SA, is provided. The high performance SiC m…
Advanced ceramic materials synthesisFusion materials and technologiesAluminum Alloys Composites Properties
Adriane G. Simanke、Griselda B. Galland、Liane Lucy de Lucca Freitas 等 6 位作者2001-01-01Macromolecular Chemistry and Physics
The influence of comonomer content and type on the dynamic-mechanical behavior of some ethylene/α-olefin (1-hexene, 1-octene, 1-decene, 1-octadecene and 4-methyl-1-pentene) copolymers was studied. It was observed that the comonomer content has great influence on α- and β-transitions, but almost no influence on γ-trans…
Polymer crystallization and propertiesAdvanced Polymer Synthesis and CharacterizationPolymer composites and self-healing
Xianqing Qiu、Noritatsu Tsubaki、Kaoru Fujimoto2001-01-01JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Silica-supported cobalt catalyst was studied for hydroformylation of 1-hexene. The influence of pore size of the silica support was investigated. It was found that cobalt catalyst supported on silica with appropriate pore size, about 6-10 nm, was active for the reaction with very high selectivity to oxygenates. The sm…
Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCatalysis and Oxidation Reactions
Shigeru Kuramoto、Ichiro Araki、Motohiro Kanno2001-01-01Journal of Japan Institute of Light Metals
Hydrogen behavior during stress-corrosion cracking in an AZ31 magnesium alloy was studied by using hydrogen microprint technique (HMT), which is a method to visualize points of hydrogen emission from metals. Tensile test specimens were prepared from an extruded bar of the AZ31 magnesium alloy and deformed in tension a…
Metal and Thin Film MechanicsMagnesium Alloys: Properties and ApplicationsHydrogen embrittlement and corrosion behaviors in metals